ASTM D2095
Tensile Fixture for Adhesive Bar and Rod Specimens

ASTM D2095 Tensile Fixture – Universal Grip Data Sheet (PDF)
ASTM D2095 determines the comparative tensile strength of adhesives bonded between bar or rod adherends and loaded perpendicular to the bond plane. Specimens are usually metal, butt-bonded end to end. Universal Grip supplies a self-aligning tensile fixture that keeps the bond line in pure tension so results reflect the adhesive rather than misalignment.
What ASTM D2095 Measures
The test reports the tensile strength of the adhesive bond, calculated from the failure load and the bonded area. Because the bond is loaded normal to its plane, even a small angle or offset adds bending and cleavage at one edge and lowers the result. That is why alignment is critical in D2095 and why universal-joint or similar self-aligning loading is used. Results are used to compare adhesives, surface preparations and bonding processes.
How the ASTM D2095 Test Works
-
Bond two bars or rods end to end with the adhesive, keeping them coaxial while it cures.
-
Condition the bonded specimens as specified.
-
Attach the specimen ends to the holders with load pins or threaded holders.
-
Connect the holders to the frame through the self-aligning couplings.
-
Pull at the specified rate to failure and record the maximum load and failure mode.
Specimens and Setup
-
Use a bonding jig so the two adherends stay coaxial during cure.
-
Prepare adherend faces consistently; surface treatment is often what the test is evaluating.
-
Control bond line thickness and remove squeeze-out around the joint.
-
Match the specimen end attachment (pin or thread) to the holders before bonding.
-
Confirm specimen dimensions and test rate against your copy of the current standard.
Universal Grip ASTM D2095 Fixture
-
Self-aligning holders keep the bond line in pure tension
-
Pin or threaded specimen attachment for bar and rod specimens
-
Universal-joint style couplings minimize bending and cleavage
-
Hardened load pins for repeatable, long-life use
-
50 kN standard capacity; higher capacities on request
-
Hardened alloy steel; clevis pin or threaded adapter for electromechanical and servo-hydraulic frames
Applications
-
Structural adhesive comparison
-
Metal butt-joint bonds
-
Surface preparation evaluation
-
Adhesive production QC
Related Standards and Products
Send us your bar or rod size, specimen end attachment, capacity and machine connection through our contact page and we will quote an ASTM D2095 tensile fixture. Request a quote
ASTM D2095 FAQ
Why is alignment so important in D2095?
The bond is loaded normal to its plane. Any misalignment adds bending, which concentrates stress at one edge and starts a cleavage-type failure at a lower load. Self-aligning couplings keep the load axial so results are comparable.
Bar or rod specimens: which should I use?
D2095 allows both. Choose the form your adhesive specification, customer or historical data use, and keep it consistent so results stay comparable. Tell us the size so the holders match.
How is D2095 different from ASTM D897?
Both pull bonded metal adherends apart normal to the bond. D897 uses its own standard-shape specimens, while D2095 uses butt-bonded bars and rods. Labs pick the one called up by their specification.
How is D2095 different from lap shear testing?
Lap shear tests such as ASTM D1002 load the adhesive in shear. D2095 loads it in tension across the bond. Many adhesive programs measure both.
What capacity do I need?
The standard fixture is rated at 50 kN, which suits many metal butt-joint specimens. Strong structural adhesives on larger bars may need more; higher capacities are available on request.
