Home › Products › Cutting Dies › ASTM E345 Type B Cutting Die
ASTM E345 Type B Cutting Die – Rectangular Strip
Rectangular Strip · Tensile specimen — built to ASTM E345. Hardened steel or economical ribbon steel.
Brand: Universal Grip | Model: UGC-CDH-E345-TB / UGC-CDR-E345-TB | ● Made to order
Cuts the ASTM E345 Type B rectangular Strip profile: 230 mm overall length
Two styles: hardened steel for 0–5 mm, ribbon steel for 0–3 mm
Integral ejector (hardened) or foam pad (ribbon) pushes each specimen free
Fits manual, pneumatic and hydraulic sample-cutting presses
Free test cuts on your material before you order
Custom profiles, multi-cavity dies and nick/notch features on request
Downloads: Ribbon Steel Die Data Sheet (PDF)
Standards: ASTM E345 · ASTM E8/E8M
Trusted by Global Companies
Precision cutting die for ASTM E345 Type B rectangular Strip specimens
This Universal Grip die cuts the rectangular Strip (tensile specimen) defined in ASTM E345: Standard Test Methods of Tension Testing of Metallic Foil. ASTM E345 covers tension testing of metallic foil less than 0.15 mm thick. Type B is a straight-sided rectangular strip that is simple to cut and is used where reduced-section specimens are impractical.
We make it in two styles so the die suits the material you cut. The one-piece hardened steel die is machined from a single piece of steel and holds its edge on rigid & semi-rigid plastics, filled compounds, rubber, sheet & film from 0 to 5 mm thick. The ribbon steel (steel-rule) die uses a precision-bent hardened rule in a laser-cut plywood base with a foam ejection pad, an economical choice for rubber, elastomers, TPE, foams, soft plastics & films up to 3 mm. Both cut the same ASTM E345 Type B profile.
ASTM E345 Type B specimen dimensions
The die is cut to the nominal profile in ASTM E345: overall length (min) 230 mm, width 12.5 mm, gauge length 50 mm and foil thickness <0.15 mm. Always check your current edition of the standard for tolerances and the test procedure.
Type B compared with other ASTM E345 dies
Type B: 230 mm overall length (this die)
Where it is used
Typical uses for ASTM E345 Type B specimens include aluminum & copper foil, battery current-collector foil, shim stock and packaging foil.
Cutting specimens with the die
The die mounts on a benchtop arbor press with a simple lateral screw; the material sits on a hard nylon cutting plate so every stroke cuts cleanly through. With an adapter, the same die can also cut specimens on your universal testing machine. Send us a sample of your material and we will make test cuts free of charge, so you can confirm the edge quality before you order. Hardened dies can be re-sharpened with our die sharpening tool.
ASTM E345 Type B Cutting Die Specifications
STANDARD
ASTM E345 Type B
SPECIMEN
Rectangular Strip
SPECIMEN TYPE
Tensile specimen
OVERALL LENGTH (MIN)
230 mm
WIDTH
12.5 mm
GAUGE LENGTH
50 mm
FOIL THICKNESS
<0.15 mm
HARDENED STEEL DIE
One-piece machined steel, 0–5 mm material, integral ejector plate
RIBBON STEEL DIE
Steel rule in plywood base, 0–3 mm material, foam ejection pad
PRESS COMPATIBILITY
Manual, pneumatic & hydraulic sample-cutting presses
PART NUMBERS
UGC-CDH-E345-TB (hardened) · UGC-CDR-E345-TB (ribbon)
Models & Options
Hardened Steel Cutting Die — One-piece machined, hardened and precision-finished; rigid & semi-rigid plastics, filled compounds, rubber, sheet & film; 0–5 mm; integral ejector plate; re-sharpenable (UGC-CDH-E345-TB)
Ribbon Steel Cutting Die — Precision-bent hardened steel rule in a laser-cut plywood base with closed-cell foam ejection pad; rubber, elastomers, TPE, foams, soft plastics & films; 0–3 mm; economical, fast turnaround (UGC-CDR-E345-TB)
Press mounting — Matched to your press make and model, or an adapter for your universal testing machine (Specify at order)
Custom features — Custom profiles, multi-cavity dies and nick/notch features on request (Custom)
What's Included
ASTM E345 Type B cutting die in your chosen style (hardened or ribbon steel)
Specimen ejection: integral ejector plate (hardened) or foam ejection pad (ribbon)
Mounting to suit your press — tell us the make and model
Data sheet with the nominal profile dimensions
Supported Test Standards
ASTM E345 — Standard Test Methods of Tension Testing of Metallic Foil
ASTM E8/E8M — Related standard: tension testing of metallic materials
Compatible Grips & Fixtures
Arbor press — Benchtop press for cutting rectangular Strip specimens with this die
Sample die press — Specimen-preparation presses and tools
Wedge grips — Self-tightening wedge grips for sheet and strip specimens
Punch press — Heavy presses for thicker aluminium and steel sheet
Die sharpening tool — Restore the cutting edge of a hardened steel die
Marking tool — Repeatable 50 mm gauge marks for video extensometers
Metals testing — Grips, fixtures and standards for metal tensile, bend and hardness tests
“Customer quote”
Related Equipment
ASTM E345 Type A Cutting Die
Reduced-Section Foil Tensile Specimen · 12.5 × 60 mm narrow section
GOST 11701 Type 1 Cutting Die
Flat Sheet-metal Tensile Specimen with Heads · 12.5 × 75 mm narrow section
ISO 6892-1 Type 1 Cutting Die
Flat Sheet Specimen · 12.5 × 75 mm narrow section
ISO 6892-1 Type 2 Cutting Die
Flat Sheet Specimen · 20 × 120 mm narrow section
ASTM E345 Type B Cutting Die FAQ
What is the ASTM E345 test used for?
ASTM E345 covers tension testing of metallic foil less than 0.15 mm thick. Type B is a straight-sided rectangular strip that is simple to cut and is used where reduced-section specimens are impractical.
What are the ASTM E345 Type B specimen dimensions?
The die cuts the nominal ASTM E345 profile: overall length (min) 230 mm, width 12.5 mm, gauge length 50 mm and foil thickness <0.15 mm. These values come from the standard; check your current edition for tolerances.
Hardened steel or ribbon steel: which ASTM E345 Type B die should I choose?
For metal foil, thin sheet and strip, choose the hardened steel die; the ribbon steel die is meant for soft materials such as rubber and film. For thicker aluminium or steel sheet, see our punch presses.
Which press do I need for the ASTM E345 Type B die?
The die fits manual, pneumatic and hydraulic sample-cutting presses. On our arbor press it mounts with a lateral screw, and an adapter lets it run on a universal testing machine. Tell us your press make and model and we will match the mounting.
How do I grip and measure ASTM E345 Type B specimens?
Hold the wide ends in wedge grips so the specimen is loaded straight along its axis. The gauge length is 50 mm; our marking tool applies repeatable gauge marks for video extensometers.
Which other ASTM E345 dies do you make?
We also make cutting dies for Type A, each in hardened and ribbon steel.
Can you make test cuts on my material?
Yes. Send us a sample of your sheet and we will make test cuts free of charge, so you can see the edge quality and confirm the right die style before you order.
Can you make a custom or multi-cavity ASTM E345 Type B die?
Yes. We make custom profiles, multi-cavity dies and nick or notch features on request. Send the drawing or standard, your material and thickness, and your press model.