Home › Products › Cutting Dies › ISO 1926 Cutting Die
ISO 1926 Cutting Die – Rigid Foam Dumbbell
Rigid Foam Dumbbell · Tensile specimen — built to ISO 1926. Hardened steel or economical ribbon steel.
Brand: Universal Grip | Model: UGC-CDH-ISO1926 / | ● Made to order
Cuts the ISO 1926 rigid Foam Dumbbell profile: 25 × 55 mm narrow section, 150 mm overall length
Two styles: hardened steel for 0–5 mm, ribbon steel for 0–3 mm
Integral ejector (hardened) or foam pad (ribbon) pushes each specimen free
Fits manual, pneumatic and hydraulic sample-cutting presses
Free test cuts on your material before you order
Custom profiles, multi-cavity dies and nick/notch features on request
Downloads: Ribbon Steel Die Data Sheet (PDF)
Standards: ISO 1926
Trusted by Global Companies
Precision cutting die for ISO 1926 rigid Foam Dumbbell specimens
This Universal Grip die cuts the rigid Foam Dumbbell (tensile specimen) defined in ISO 1926: Rigid cellular plastics — Determination of tensile properties. ISO 1926 determines tensile strength, elongation and modulus of rigid foams such as PUR/PIR and expanded or extruded polystyrene. The dumbbell is cut from board, with reinforced ends allowed when the material cannot be gripped directly.
We make it in two styles so the die suits the material you cut. The one-piece hardened steel die is machined from a single piece of steel and holds its edge on rigid & semi-rigid plastics, filled compounds, rubber, sheet & film from 0 to 5 mm thick. The ribbon steel (steel-rule) die uses a precision-bent hardened rule in a laser-cut plywood base with a foam ejection pad, an economical choice for rubber, elastomers, TPE, foams, soft plastics & films up to 3 mm. Both cut the same ISO 1926 profile.
ISO 1926 specimen dimensions
The die is cut to the nominal profile in ISO 1926: overall length 150 mm, width of narrow section 25 mm, length of narrow section 55 mm, gauge length 50 mm and thickness 10 mm (typical). Always check your current edition of the standard for tolerances and the test procedure.
Where it is used
Typical uses for ISO 1926 specimens include building insulation boards, sandwich panel cores, refrigeration insulation and structural foam cores.
Cutting specimens with the die
The die mounts on a benchtop arbor press with a simple lateral screw; the material sits on a hard nylon cutting plate so every stroke cuts cleanly through. With an adapter, the same die can also cut specimens on your universal testing machine. Send us a sample of your material and we will make test cuts free of charge, so you can confirm the edge quality before you order. Hardened dies can be re-sharpened with our die sharpening tool.
ISO 1926 Cutting Die Specifications
STANDARD
ISO 1926
SPECIMEN
Rigid Foam Dumbbell
SPECIMEN TYPE
Tensile specimen
OVERALL LENGTH
150 mm
WIDTH OF NARROW SECTION
25 mm
LENGTH OF NARROW SECTION
55 mm
GAUGE LENGTH
50 mm
THICKNESS
10 mm (typical)
HARDENED STEEL DIE
One-piece machined steel, 0–5 mm material, integral ejector plate
RIBBON STEEL DIE
Steel rule in plywood base, 0–3 mm material, foam ejection pad
PRESS COMPATIBILITY
Manual, pneumatic & hydraulic sample-cutting presses
PART NUMBERS
UGC-CDH-ISO1926 (hardened) · (ribbon)
Models & Options
Hardened Steel Cutting Die — One-piece machined, hardened and precision-finished; rigid & semi-rigid plastics, filled compounds, rubber, sheet & film; 0–5 mm; integral ejector plate; re-sharpenable (UGC-CDH-ISO1926)
Ribbon Steel Cutting Die — Precision-bent hardened steel rule in a laser-cut plywood base with closed-cell foam ejection pad; rubber, elastomers, TPE, foams, soft plastics & films; 0–3 mm; economical, fast turnaround
Press mounting — Matched to your press make and model, or an adapter for your universal testing machine (Specify at order)
Custom features — Custom profiles, multi-cavity dies and nick/notch features on request (Custom)
What's Included
ISO 1926 cutting die in your chosen style (hardened or ribbon steel)
Specimen ejection: integral ejector plate (hardened) or foam ejection pad (ribbon)
Mounting to suit your press — tell us the make and model
Data sheet with the nominal profile dimensions
Supported Test Standards
ISO 1926 — Rigid cellular plastics — Determination of tensile properties
Compatible Grips & Fixtures
Arbor press — Benchtop press for cutting rigid Foam Dumbbell specimens with this die
Sample die press — Specimen-preparation presses and tools
Pneumatic grips — Gentle, even clamping for foam dumbbells
Die sharpening tool — Restore the cutting edge of a hardened steel die
Marking tool — Repeatable 50 mm gauge marks for video extensometers
Foam testing — Fixtures and grips for flexible and rigid cellular materials
“Customer quote”
Related Equipment
JIS K6400-5 Fig. 2-1 Cutting Die
Foam Tensile Dumbbell (Type 1) · 13 × 55 mm narrow section
JIS K6400-5 Fig. 3-2 Cutting Die
Foam Tensile Dumbbell (Type 1A) · 10 × 40 mm narrow section
ISO 1798 Type 1 Cutting Die
Foam Dumbbell · 13 × 55 mm narrow section
ISO 1798 Type 1A Cutting Die
Foam Dumbbell · 10 × 40 mm narrow section
ISO 1926 Cutting Die FAQ
What is the ISO 1926 test used for?
ISO 1926 determines tensile strength, elongation and modulus of rigid foams such as PUR/PIR and expanded or extruded polystyrene. The dumbbell is cut from board, with reinforced ends allowed when the material cannot be gripped directly.
What are the ISO 1926 specimen dimensions?
The die cuts the nominal ISO 1926 profile: overall length 150 mm, width of narrow section 25 mm, length of narrow section 55 mm, gauge length 50 mm and thickness 10 mm (typical). These values come from the standard; check your current edition for tolerances.
Hardened steel or ribbon steel: which ISO 1926 die should I choose?
Ribbon steel dies suit soft, flexible foam; hardened steel suits denser or rigid foam. Foam specimens can be thicker than a standard die depth, so tell us your thickness and we will confirm the die height.
Which press do I need for the ISO 1926 die?
The die fits manual, pneumatic and hydraulic sample-cutting presses. On our arbor press it mounts with a lateral screw, and an adapter lets it run on a universal testing machine. Tell us your press make and model and we will match the mounting.
How do I grip and measure ISO 1926 specimens?
Hold the wide ends in pneumatic grips so the specimen is loaded straight along its axis. The gauge length is 50 mm; our marking tool applies repeatable gauge marks for video extensometers.
Can you make test cuts on my material?
Yes. Send us a sample of your sheet and we will make test cuts free of charge, so you can see the edge quality and confirm the right die style before you order.
Can you make a custom or multi-cavity ISO 1926 die?
Yes. We make custom profiles, multi-cavity dies and nick or notch features on request. Send the drawing or standard, your material and thickness, and your press model.