Home › Products › Cutting Dies › ISO 527-2 Type 1BA Cutting Die
ISO 527-2 Type 1BA Cutting Die – Small Dumbbell
Small Dumbbell Type 1BA · Tensile specimen — built to ISO 527-2. Hardened steel or economical ribbon steel.
Brand: Universal Grip | Model: / UGC-CDR-ISO5272-T1BA | ● Made to order
Cuts the ISO 527-2 Type 1BA small Dumbbell profile: 5.0 × 30.0 mm narrow section, 75 mm overall length
Two styles: hardened steel for 0–5 mm, ribbon steel for 0–3 mm
Integral ejector (hardened) or foam pad (ribbon) pushes each specimen free
Fits manual, pneumatic and hydraulic sample-cutting presses
Free test cuts on your material before you order
Custom profiles, multi-cavity dies and nick/notch features on request
Downloads: Ribbon Steel Die Data Sheet (PDF)
Trusted by Global Companies
Precision cutting die for ISO 527-2 Type 1BA small Dumbbell specimens
This Universal Grip die cuts the small Dumbbell Type 1BA (tensile specimen) defined in ISO 527-2: Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics. ISO 527-2 defines tensile test specimens and conditions for moulding and extrusion plastics, building on the general principles of ISO 527-1. Type 1BA is a 1:2 scaled version of Type 1B for when only small samples are available.
We make it in two styles so the die suits the material you cut. The one-piece hardened steel die is machined from a single piece of steel and holds its edge on rigid & semi-rigid plastics, filled compounds, rubber, sheet & film from 0 to 5 mm thick. The ribbon steel (steel-rule) die uses a precision-bent hardened rule in a laser-cut plywood base with a foam ejection pad, an economical choice for rubber, elastomers, TPE, foams, soft plastics & films up to 3 mm. Both cut the same ISO 527-2 Type 1BA profile.
ISO 527-2 Type 1BA specimen dimensions
The die is cut to the nominal profile in ISO 527-2: overall length (min) 75 mm, width of ends 10.0 ± 0.5 mm, length of narrow section 30.0 ± 0.5 mm, width of narrow section 5.0 ± 0.5 mm, transition radius (min) 30 mm, gauge length 25.0 ± 0.5 mm and thickness (min) 2 mm. Always check your current edition of the standard for tolerances and the test procedure.
Type 1BA compared with other ISO 527-2 dies
Type 1B: 10.0 × 60.0 mm narrow section, 150 mm overall length
Type 1BA: 5.0 × 30.0 mm narrow section, 75 mm overall length (this die)
Type 1BB: 2.0 × 12.0 mm narrow section, 30 mm overall length
Type 1BA sits mid-range among the 6 ISO 527-2 profiles we make.
Where it is used
Typical uses for ISO 527-2 Type 1BA specimens include injection-moulded parts, extruded sheet & profiles, resin qualification and filled & reinforced compounds.
Cutting specimens with the die
Put the die on an arbor press or a pneumatic press, set your sheet on a nylon cutting plate and press through in one stroke; the ejector pushes the specimen out ready to test. No press yet? An adapter lets the die run on your universal testing machine. Send us a sample of your material and we will make test cuts free of charge, so you can confirm the edge quality before you order. Hardened dies can be re-sharpened with our die sharpening tool.
ISO 527-2 Type 1BA Cutting Die Specifications
STANDARD
ISO 527-2 Type 1BA
SPECIMEN
Small Dumbbell Type 1BA
SPECIMEN TYPE
Tensile specimen
OVERALL LENGTH (MIN)
75 mm
WIDTH OF ENDS
10.0 ± 0.5 mm
LENGTH OF NARROW SECTION
30.0 ± 0.5 mm
WIDTH OF NARROW SECTION
5.0 ± 0.5 mm
TRANSITION RADIUS (MIN)
30 mm
GAUGE LENGTH
25.0 ± 0.5 mm
THICKNESS (MIN)
2 mm
HARDENED STEEL DIE
One-piece machined steel, 0–5 mm material, integral ejector plate
RIBBON STEEL DIE
Steel rule in plywood base, 0–3 mm material, foam ejection pad
PRESS COMPATIBILITY
Manual, pneumatic & hydraulic sample-cutting presses
PART NUMBERS
(hardened) · UGC-CDR-ISO5272-T1BA (ribbon)
Models & Options
Hardened Steel Cutting Die — One-piece machined, hardened and precision-finished; rigid & semi-rigid plastics, filled compounds, rubber, sheet & film; 0–5 mm; integral ejector plate; re-sharpenable
Ribbon Steel Cutting Die — Precision-bent hardened steel rule in a laser-cut plywood base with closed-cell foam ejection pad; rubber, elastomers, TPE, foams, soft plastics & films; 0–3 mm; economical, fast turnaround (UGC-CDR-ISO5272-T1BA)
Press mounting — Matched to your press make and model, or an adapter for your universal testing machine (Specify at order)
Custom features — Custom profiles, multi-cavity dies and nick/notch features on request (Custom)
What's Included
ISO 527-2 Type 1BA cutting die in your chosen style (hardened or ribbon steel)
Specimen ejection: integral ejector plate (hardened) or foam ejection pad (ribbon)
Mounting to suit your press — tell us the make and model
Data sheet with the nominal profile dimensions
Supported Test Standards
Compatible Grips & Fixtures
Arbor press — Benchtop press for cutting small Dumbbell specimens with this die
Sample die press — Specimen-preparation presses and tools
Wedge grips — Self-tightening wedge grips for rigid plastic dumbbells
Pneumatic grips — Constant clamping force for thin or soft plastics
Die sharpening tool — Restore the cutting edge of a hardened steel die
Marking tool — Repeatable 25.0 mm gauge marks for video extensometers
Plastics testing — Grips and fixtures for plastic film, sheet and molded parts
“Customer quote”
Related Equipment
ISO 527-2 Type 1A Cutting Die
Dumbbell · 10.0 × 80 mm narrow section
ISO 527-2 Type 1B Cutting Die
Dumbbell · 10.0 × 60.0 mm narrow section
ISO 527-2 Type 1BB Cutting Die
Micro Dumbbell · 2.0 × 12.0 mm narrow section
ISO 527-2 Type 5A Cutting Die
Small Dumbbell · 4.0 × 25 mm narrow section
ISO 527-2 Type 1BA Cutting Die FAQ
What is the ISO 527-2 test used for?
ISO 527-2 defines tensile test specimens and conditions for moulding and extrusion plastics, building on the general principles of ISO 527-1. Type 1BA is a 1:2 scaled version of Type 1B for when only small samples are available.
What are the ISO 527-2 Type 1BA specimen dimensions?
The die cuts the nominal ISO 527-2 profile: overall length (min) 75 mm, width of ends 10.0 ± 0.5 mm, length of narrow section 30.0 ± 0.5 mm, width of narrow section 5.0 ± 0.5 mm, transition radius (min) 30 mm, gauge length 25.0 ± 0.5 mm and thickness (min) 2 mm. These values come from the standard; check your current edition for tolerances.
Hardened steel or ribbon steel: which ISO 527-2 Type 1BA die should I choose?
For rigid and semi-rigid plastics, filled compounds and sheet up to 5 mm, choose the hardened steel die. The ribbon steel die is the economical option for soft plastics and films up to 3 mm.
Which press do I need for the ISO 527-2 Type 1BA die?
The die fits manual, pneumatic and hydraulic sample-cutting presses. On our arbor press it mounts with a lateral screw, and an adapter lets it run on a universal testing machine. Tell us your press make and model and we will match the mounting.
How do I grip and measure ISO 527-2 Type 1BA specimens?
Hold the wide ends in wedge grips or pneumatic grips so the specimen is loaded straight along its axis. The gauge length is 25.0 ± 0.5 mm; our marking tool applies repeatable gauge marks for video extensometers.
Which other ISO 527-2 dies do you make?
We also make cutting dies for Type 1A, Type 1B, Type 1BB, Type 5A and Type 5B, each in hardened and ribbon steel.
Can you make test cuts on my material?
Yes. Send us a sample of your sheet and we will make test cuts free of charge, so you can see the edge quality and confirm the right die style before you order.
Can you make a custom or multi-cavity ISO 527-2 Type 1BA die?
Yes. We make custom profiles, multi-cavity dies and nick or notch features on request. Send the drawing or standard, your material and thickness, and your press model.