Home › Products › Wedge Grips › Compact Wedge Grip 50 kN





Compact Wedge Grip 50 kN – for Small Chambers and Hot Cells
A short, screw-actuated 50 kN wedge grip built to fit small test chambers and hot cells used for testing radioactive specimens.
Brand: Universal Grip | Model: UGC-WG-040 | ● Configured to order
Compact, blocky body fits small chambers and hot cells
Carries 50 kN (11,240 lbf) despite its size
Screw drive closes the wedge jaw against the specimen
Keeps the load train short where test space is limited
Threaded stud coupling for direct mounting in confined spaces
Steel body with a black protective finish
Downloads and standards
Trusted by Global Companies


























A 50 kN wedge grip for confined test spaces
Hot cells and shielded chambers for radioactive specimens leave very little room around the specimen. A standard wedge grip with its clevis, pin and long body often will not fit, or leaves no space for the rest of the load train. The UGC-WG-040 is a special compact wedge grip designed for these situations. It carries 50 kN (11,240 lbf) in a short, blocky body that keeps the load train as short as possible.
How it works
A screw drive advances the wedge jaw onto the specimen to set the initial grip, without levers that need swing clearance. When tension is applied, the wedge carries the load. Instead of a clevis and pin, the grip connects through a threaded stud, which allows direct mounting to the load string where there is no room to insert or remove a pin. The steel body has a black protective finish.
Built to the chamber
Because the grip is designed around the space available, its dimensions are set to your chamber rather than taken from a catalog, and the specimen size and temperature range are defined on request. We start from the chamber and the specimen and work back to the grip. Useful information for a first discussion includes:
internal dimensions of the chamber or hot cell and how the grips will be brought in
specimen shape, width and thickness
required capacity, up to 50 kN
the thread or connection on your load string
test temperature, if the chamber is heated or cooled
Typical applications
Radioactive specimen testing, hot cell test systems, small environmental chambers and nuclear materials research. The same compact layout is useful wherever a chamber is too small for a conventional 50 kN wedge grip.
Related grips and machines
Where space is less tight, the UGC-WG-100 wedge grips in 20 and 50 kN sizes offer a chamber kit with counterweights and pull rods for standard environmental chambers. On the machine side, a 50 kN grip fits Galdabini 50 kN and 100 kN benchtop frames, and adapters can bridge the threaded stud to other crosshead connections outside the cell.
Share your chamber dimensions, specimen details and load string connection, and we will propose a grip design. Request a quote.
Compact Wedge Grip 50 kN Specifications
MAX. LOAD
50 kN
TEST TYPE
Tensile
CLAMPING PRINCIPLE
Wedge, screw-actuated
COUPLING
Threaded stud
MATERIAL
Steel, black finish
SPECIMEN SIZE
On request
TEMPERATURE RANGE
On request
DIMENSIONS
Compact, made to chamber size
PART REF.
UGC-WG-040
Models & Options
Name — Description (Part #)
Chamber-specific build — Dimensions made to the available chamber space (On request)
Threaded stud coupling — Thread matched to your load string (Specify at order)
Jaws — Sized to the specimen geometry (On request)
What's Included
Compact screw-actuated wedge grip built to the agreed chamber dimensions
Threaded stud coupling as specified
Supported Test Standards
Standards list
Compatible Grips & Fixtures
50 kN Benchtop Testing Machine — Galdabini frame matched to the 50 kN rating
100 kN Benchtop Testing Machine — Extra capacity margin
Environmental Chambers — Temperature chambers for non-shielded tests
Adapters — Bridge the threaded stud to other couplings
Wedge Grip 20-50 kN — Standard wedge grips with a chamber kit
“Customer quote”
Related Equipment
UGC-WG-100 Wedge Grip 20-50 kN
Self-tightening wedge grips in 20 kN and 50 kN sizes with a lever arm for fast loading and a -40 to +280 °C option for c
UGC-WG-030 Cryogenic Wedge Grip 20 kN
Stainless steel wedge grips for tensile tests in liquid nitrogen and liquid hydrogen, rated 20 kN at temperatures down t
UGC-WG-050 Mechanical Wedge Grip 600 kN
Enclosed, crank-operated wedge grip for high-force tensile tests to 600 kN on flat specimens up to 40 mm thick.
UGC-WG-020 Heavy Duty Wedge Grip 600 kN
Non-shift wedge grips for high-strength plate, bar and rod up to 600 kN, with jaws for flat specimens to 50 mm and round
Compact Wedge Grip 50 kN FAQ
What is this grip designed for?
Small test chambers and hot cells, such as those used for measurements on radioactive specimens, where standard wedge grips do not fit.
How is the specimen clamped?
A screw drive closes the wedge jaw against the specimen; under tension the wedge carries loads up to 50 kN (11,240 lbf).
How does it connect to the load string?
Through a threaded stud for direct mounting in confined spaces. Other connections can be made with adapters.
What specimen sizes does it accept?
Specimen size is defined on request, together with the chamber dimensions.
Can it be used at elevated or low temperature?
The temperature range is set on request. Tell us the chamber conditions when you ask for a quote.




