top of page

Home  ›  Products  ›  Wedge Grips  ›  Heavy Duty Wedge Grip 600 kN

UGC-WG-020 heavy duty 600 kN non-shift wedge grip for flat and round specimens by Universal Grip
UGC-WG-020 heavy duty 600 kN non-shift wedge grip for flat and round specimens by Universal Grip
UGC-WG-020 Heavy Duty Wedge Grip 600 kN by Universal Grip, view 2
UGC-WG-020 Heavy Duty Wedge Grip 600 kN by Universal Grip, view 3
UGC-WG-020 Heavy Duty Wedge Grip 600 kN by Universal Grip, view 4

Heavy Duty Wedge Grip 600 kN – Non-Shift, Flat and Round

Non-shift wedge grips for high-strength plate, bar and rod up to 600 kN, with jaws for flat specimens to 50 mm and rounds from Ø 8 to 50 mm.

Brand: Universal Grip  |  Model: UGC-WG-020  |  ● Configured to order

  • Rated to 600 kN (134,880 lbf) for high-strength metals

  • Non-shift: the body moves while the jaws hold position during clamping

  • No unwanted preload is introduced as the grip closes

  • Pyramid jaws for flat specimens 0–30, 25–40 or 30–50 mm thick

  • V-jaws for round specimens from Ø 8 to 50 mm (0.31 to 1.97 in)

  • Hardened steel jaws with a nickel-plated finish

Standards: ASTM E8  ·  ISO 6892-1  ·  ASTM A370

Trusted by Global Companies

600 kN wedge grips for high-strength plate and bar

At 600 kN (134,880 lbf) the way a grip closes matters as much as how hard it holds. The UGC-WG-020 is a heavy-duty, non-shift wedge grip for flat and round specimens of high-strength steel and other structural metals, intended for large-capacity testing machines.

 

Non-shift clamping

In a conventional wedge grip the jaws slide along the wedge as they close and can drag the specimen with them. In this grip only the body moves; the jaws keep their position. The specimen is therefore not shifted or preloaded during clamping, so the force-extension record starts from a true zero and a thick specimen is not pre-strained before data collection begins. Once the test is under way, the wedge geometry adds clamping force as tension rises.

 

Jaws and size ranges

Jaws are hardened steel with a nickel-plated finish and are ordered separately from the grips, in sets of four.

  • Pyramid (serrated) jaws for flat specimens: 0–30, 25–40 or 30–50 mm thick (up to 1.97 in)

  • V-jaws for round specimens: Ø 8–15, 10–25 and 20–35 mm, with further sets up to Ø 50 mm

The overlapping ranges let a lab cover a whole product family, for example several rebar sizes, by changing jaw sets rather than grips.

 

Typical applications

High-strength steel plate, reinforcing bar and round bar, structural metals, heavy fasteners and rods. These are specimens used in tests such as ASTM E8, ISO 6892-1 and ASTM A370.

 

Coupling and machine fit

The grips mount through a bolted flange with a clevis adapter. Other couplings are available on request, and our adapters page lists standard options. A grip of this capacity calls for a Galdabini hydraulic universal testing machine or a heavy floor-standing testing machine rated at 600 kN or more.

If part of your work runs at lower forces, the UGC-WG-130 manual non-shift wedge grips apply the same clamping principle at 50, 100 and 250 kN. For a crank-operated grip at the same 600 kN rating, see the UGC-WG-050 mechanical wedge grip.

Tell us the specimen geometry and size range, the jaw sets you need and how your crosshead is configured, and we will prepare a quotation. Request a quote.

Mechanical wedge grips

At a glance

  • Max. load: 600 kN

  • Test type: Tensile

  • Flat specimen thickness: 0–30, 25–40 or 30–50 mm (by jaw set)

  • Round specimen diameter: Ø 8–50 mm (by jaw set)

  • Clamping principle: Wedge, non-shift

  • Material: Steel, nickel-plated; jaws hardened

Heavy Duty Wedge Grip 600 kN Specifications

MAX. LOAD

600 kN

 

TEST TYPE

Tensile

 

FLAT SPECIMEN THICKNESS

0–30, 25–40 or 30–50 mm (by jaw set)

 

ROUND SPECIMEN DIAMETER

Ø 8–50 mm (by jaw set)

 

CLAMPING PRINCIPLE

Wedge, non-shift

 

MATERIAL

Steel, nickel-plated; jaws hardened

 

COUPLING

Bolted flange with clevis adapter; others on request

 

SCOPE OF SUPPLY

1 pair of grips without jaws

 

PART REF.

UGC-WG-020

 

Models & Options

  • Name — Description (Part #)

  • Pyramid jaws 0–30 mm — Flat specimens, set of 4 (Specify at order)

  • Pyramid jaws 25–40 mm — Flat specimens, set of 4 (Specify at order)

  • Pyramid jaws 30–50 mm — Flat specimens, set of 4 (Specify at order)

  • V-jaws Ø 8–15 mm — Round specimens (Specify at order)

  • V-jaws Ø 10–25 mm — Round specimens (Specify at order)

  • V-jaws Ø 20–35 mm — Round specimens (Specify at order)

  • V-jaws Ø 15–40 mm — Round specimens (Specify at order)

  • V-jaws Ø 35–50 mm — Round specimens (Specify at order)

  • Other couplings — Alternative to the bolted flange and clevis adapter (On request)

What's Included

  • One pair of 600 kN non-shift wedge grips

  • Bolted flange coupling with clevis adapter, unless another coupling is specified

  • Jaws are not included; order pyramid or V-jaw sets (four jaws per set) for your specimen range

Supported Test Standards

  • ASTM E8 — Tension testing of metallic materials

  • ISO 6892-1 — Tensile testing of metallic materials at room temperature

  • ASTM A370 — Mechanical testing of steel products

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-WG-050 Mechanical Wedge Grip 600 kN

UGC-WG-050 Mechanical Wedge Grip 600 kN

Enclosed, crank-operated wedge grip for high-force tensile tests to 600 kN on flat specimens up to 40 mm thick.

UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN

UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN

Manual wedge grips that close without moving the specimen axially, in 50, 100 and 250 kN sizes for flat and round specim

UGC-WG-010 Steel Rope and Rebar Tensile Fixture

UGC-WG-010 Steel Rope and Rebar Tensile Fixture

Modular holders with self-tightening conical inserts for tensile tests on steel wire rope, prestressing strand and steel

UGC-WG-030 Cryogenic Wedge Grip 20 kN

UGC-WG-030 Cryogenic Wedge Grip 20 kN

Stainless steel wedge grips for tensile tests in liquid nitrogen and liquid hydrogen, rated 20 kN at temperatures down t

Heavy Duty Wedge Grip 600 kN FAQ

What does non-shift mean on this grip?

When the grip closes, the body moves and the jaws stay where they are, so the specimen is neither pulled nor preloaded during clamping.

 

How thick a flat specimen can it hold?

Up to 50 mm (1.97 in), using pyramid jaw sets for 0–30, 25–40 or 30–50 mm.

 

Which round diameters can it grip?

Ø 8 to 50 mm with V-jaws. Standard sets cover 8–15, 10–25 and 20–35 mm, with larger sets up to 50 mm.

 

Are jaws included?

No. The grips are supplied as a pair without jaws, and you order jaw sets of four for your specimen range.

 

How does the grip mount to the machine?

Through a bolted flange with a clevis adapter. Other couplings are available on request; see adapters.

 

Which testing machines suit a 600 kN grip?

A hydraulic universal testing machine or a heavy floor-standing frame rated at 600 kN or more.

 

Need help configuring a wedge grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page