Home › Products › Wedge Grips › Wide-Width Geotextile Wedge Grip 250 kN





Wide-Width Geotextile Wedge Grip 250 kN – ASTM D4595
Wide wedge grips with interlocking wave jaws for wide-width geotextile tensile tests to ASTM D4595, in 250 kN and 350 kN versions.
Brand: Universal Grip | Model: UGC-WG-080 | ● Configured to order
Built for wide-width strip tensile tests on geotextiles to ASTM D4595
Coarse interlocking wave-profile jaws grip across the full specimen width
Wedge action tightens the hold on the fabric as the load climbs
Screw drive pre-sets the jaws before the test starts
Jaw opening 0–20 mm (0–0.79 in) for thick nonwovens and geocomposites
250 kN (56,200 lbf) and 350 kN (78,680 lbf) versions
Standards: ASTM D4595 · ISO 10319
Trusted by Global Companies


























Wedge grips for wide-width geotextile tensile tests
Geotextiles tend to neck down when pulled as a narrow strip, which is why ASTM D4595 tests a wide specimen. A wide specimen in turn needs a grip that holds evenly across its whole width, at forces that high-strength woven fabrics and geogrids can push into the hundreds of kilonewtons. The UGC-WG-080 is built for that job, in 250 kN and 350 kN versions.
How the jaws hold the fabric
The jaws carry a coarse, interlocking wave profile. Running in wedge guides across the full specimen width, they grip the fabric evenly from edge to edge instead of concentrating the hold in one area. As tension rises, the wedge action draws the jaws tighter. Before the test, a screw drive pre-sets the jaws on the specimen, so the hold is established before any load is applied. The jaw opening of 0–20 mm (0–0.79 in) accepts thick nonwovens and geocomposite drainage products as well as thin wovens.
Typical applications
Woven geotextiles
Nonwoven geotextiles
Geogrids and geonets
Geocomposite drainage products
The grip is designed for the wide-width strip method of ASTM D4595, and suits the corresponding international test, ISO 10319. See our complete ASTM D4595 guide for specimen preparation, procedure and calculations.
Choosing the version
The 250 kN version is the standard choice; the 350 kN version adds headroom for the strongest woven fabrics and geogrids. Both share the same wave-profile jaws and 0–20 mm opening, so the choice comes down to the maximum force your strongest product reaches. Both are nickel-plated steel with a female clevis for a 60 mm pin. The specimen width the jaws accept is defined on request, so tell us the width you test and the thickest product in your range.
At these forces the grips belong on a Galdabini floor-standing universal testing machine or a hydraulic testing machine with enough stroke for the elongation of geotextiles. If your crosshead uses a different coupling, our adapters bridge the 60 mm clevis. For narrow-strip and grab tests on lighter textiles, other grip styles are usually a better fit.
Send us the capacity, specimen width and thickness and your machine coupling, and we will configure the grips. Request a quote.
Wide-Width Geotextile Wedge Grip 250 kN Specifications
MAX. LOAD
250 kN or 350 kN
TEST TYPE
Tensile, wide-width strip
JAW OPENING
0–20 mm
JAW SURFACE
Coarse wave profile
CLAMPING PRINCIPLE
Wedge, screw pre-set
COUPLING
Female clevis, Ø 60 mm pin
MATERIAL
Steel, nickel-plated
SPECIMEN WIDTH
On request
STANDARD
ASTM D4595
PART REF.
UGC-WG-080
Models & Options
Name — Description (Part #)
250 kN — Standard version (Specify at order)
350 kN — High-capacity version (Specify at order)
Jaw width — Matched to your specimen width (On request)
What's Included
Wide wedge grips with wave-profile jaws in the capacity ordered
Screw drive for pre-setting the jaws
Female clevis coupling for a 60 mm pin; adapters available separately
Supported Test Standards
ASTM D4595 — Tensile properties of geotextiles by the wide-width strip method
ISO 10319 — Wide-width tensile test for geosynthetics
Compatible Grips & Fixtures
Floor-Standing Testing Machines — Galdabini frames for 250–350 kN fabric tests
Hydraulic Universal Testing Machines — High-capacity alternative
ASTM D4595 Guide — Specimen preparation, procedure and calculations
Adapters — Fit the 60 mm clevis to your crosshead
Textiles Testing — Grips and fixtures for fabrics
“Customer quote”
Related Equipment
UGC-WG-070 Wedge Grip for Round and Flat Samples 50 kN
Self-tightening 50 kN wedge grip with crank-set jaws for steel, plastic and wood; closing the front flap raises capacity
UGC-WG-090 Wedge Grip with Crank 50 kN
Low-height 50 kN wedge grip with a crank lever for high preload, taking flat and round specimens up to 60 mm, such as wo
UGC-WG-060 Low-Profile Universal Wedge Grips 100-300 kN
Crank-operated universal wedge grips with an 11° wedge angle and a compact build height, in 100 to 500 kN sizes for flat
UGC-WG-100 Wedge Grip 20-50 kN
Self-tightening wedge grips in 20 kN and 50 kN sizes with a lever arm for fast loading and a -40 to +280 °C option for c
Wide-Width Geotextile Wedge Grip 250 kN FAQ
Which test is this grip made for?
The wide-width strip tensile test for geotextiles in ASTM D4595. Our ASTM D4595 guide covers specimen preparation, procedure and calculations.
Why wave-profile jaws instead of flat serrated jaws?
The coarse interlocking wave grips the fabric evenly across the full width, and the wedge action tightens it further as the load increases.
How thick a specimen fits?
The jaw opening is 0–20 mm (0–0.79 in), which covers thin wovens as well as thick nonwovens and geocomposites.
What capacities are offered?
250 kN (56,200 lbf) as standard and 350 kN (78,680 lbf) for high-strength products.
How wide are the jaws?
The specimen width is defined on request; tell us the width you test when you ask for a quote.
Can it be used for ISO 10319?
Yes, it suits wide-width specimens for tests such as ISO 10319.




