Low-Profile Wedge Grips 100-500 kN | Universal Grip
top of page

Home  ›  Products  ›  Wedge Grips  ›  Low-Profile Universal Wedge Grips 100-300 kN

UGC-WG-060 low-profile universal wedge grips 100-300 kN with crank drive by Universal Grip
UGC-WG-060 low-profile universal wedge grips 100-300 kN with crank drive by Universal Grip
UGC-WG-060 Low-Profile Universal Wedge Grips 100-300 kN by Universal Grip, view 2
UGC-WG-060 Low-Profile Universal Wedge Grips 100-300 kN by Universal Grip, view 3
UGC-WG-060 Low-Profile Universal Wedge Grips 100-300 kN by Universal Grip, view 4

Low-Profile Universal Wedge Grips 100-300 kN – 11° Wedge

Crank-operated universal wedge grips with an 11° wedge angle and a compact build height, in 100 to 500 kN sizes for flat and round metals.

Brand: Universal Grip  |  Model: UGC-WG-060  |  ● Configured to order

  • Low 11° wedge angle suits aluminum, copper and steel up to 30 HRC

  • Crank or cordless screwdriver drives the jaws through a rear-side gear

  • Compact build height preserves daylight on short machine frames

  • Lockable lateral door for quick jaw changes

  • Sizes of 100, 150, 250, 300 and 500 kN (22,480 to 112,400 lbf)

  • Standard and quick-change insert jaws, flat and round, up to 50 mm

  • Options: compression platens, pneumatic pistons, -40 to +280 °C range

Standards: ASTM E8  ·  ISO 6892-1  ·  ASTM B557

Trusted by Global Companies

Universal wedge grips from 100 to 500 kN, built short

Large wedge grips tend to be tall, and every millimeter of grip height comes out of the machine's daylight. The UGC-WG-060 series keeps the build height low by driving the jaws through a rear-side gear, so frames with limited space between crossheads can still take long specimens. Five sizes cover 100, 150, 250, 300 and 500 kN for round and flat specimens of aluminum, copper and steel up to 30 HRC.

 

How it works

The jaws run on a low 11° wedge angle, which gives the grip a wide working range across materials. They are opened and closed with a crank handle or, to save time, a cordless screwdriver on the same rear-side gear; a pneumatic piston option is available for powered closing. A lateral door, secured with a locking screw, gives direct access for jaw changes without removing the grip from the machine.

 

Sizes

  • 100 kN: 46 kg (101 lb) per grip; female clevis for a 31.8 mm (1-1/4 in) or 40 mm pin

  • 150 kN: available with a mounted compression platen or a pneumatic piston

  • 250 kN: 70 kg (154 lb) per grip; Ø 60 mm pin

  • 300 kN: 75 kg (165 lb) per grip; Ø 60 mm pin

  • 500 kN: 100 kg (220 lb) per grip; Ø 80 mm pin

 

Jaws

Standard jaws have a 110 x 60 mm clamping surface: pyramid jaws for flat specimens 0–30 or 26–50 mm thick, and V-jaws for rounds of Ø 6–30 or 30–50 mm, including V-jaws with a pyramid surface for harder round bar. The quick-change insert system uses carriers with pyramid inserts (0–30, 10–40 and 20–50 mm), insert V-jaws (Ø 5–32, 12–40 and 16–44 mm) and diamond-coated inserts for flat or round specimens that are hard to hold. Special jaws, for example for toothed belts, are made on request. Jaws are ordered separately.

 

Options and temperature range

Standard operation is 0 to +70 °C, with a -40 to +280 °C option. A 220 mm compression platen can be mounted directly on the grip, so the same setup handles compression tests without a changeover; separate compression platens are also available. An adapter lets smaller grips connect to the wedge grip without dismounting it.

 

Machine fit

These grips suit Galdabini floor-standing and hydraulic universal testing machines; the 100 kN size can also run on a 100 kN frame. Typical work includes aluminum and copper bar and mild to medium-strength steel in tests such as ASTM E8 and ISO 6892-1.

Give us the capacity, specimen geometry and size, jaw type, coupling and temperature range, and we will put the configuration together. Request a quote.

Mechanical wedge grips

At a glance

  • Max. load: 100, 150, 250, 300 or 500 kN

  • Test type: Tensile (compression with optional platens)

  • Wedge angle: 11°

  • Jaw opening: 0–50 mm (depending on jaws)

  • Clamping surface: 110 x 60 mm (standard jaws)

  • Operation: Manual crank or cordless screwdriver; pneumatic option

Low-Profile Universal Wedge Grips 100-300 kN Specifications

MAX. LOAD

100, 150, 250, 300 or 500 kN

 

TEST TYPE

Tensile (compression with optional platens)

 

WEDGE ANGLE

11°

 

JAW OPENING

0–50 mm (depending on jaws)

 

CLAMPING SURFACE

110 x 60 mm (standard jaws)

 

OPERATION

Manual crank or cordless screwdriver; pneumatic option

 

COUPLING

Female clevis Ø 31.8 mm (1-1/4 in) or Ø 40 mm pin (100 kN); Ø 60 mm (250/300 kN); Ø 80 mm (500 kN)

 

BODY MATERIAL

Steel, nickel-plated

 

TEMPERATURE RANGE

0 to +70 °C (-40 to +280 °C option)

 

WEIGHT PER GRIP

46 kg (100 kN) to 100 kg (500 kN), without jaws

 

PART REF.

UGC-WG-060

 

Models & Options

  • Name — Description (Part #)

  • 100 kN — 46 kg per grip (Specify at order)

  • 150 kN — Available with mounted compression platen or pneumatic piston (Specify at order)

  • 250 kN — 70 kg per grip (Specify at order)

  • 300 kN — 75 kg per grip (Specify at order)

  • 500 kN — 100 kg per grip (Specify at order)

  • Standard pyramid jaws — 110 x 60 mm; flat 0–30 or 26–50 mm (Specify at order)

  • Standard V-jaws — Round Ø 6–30 or 30–50 mm; pyramid-surface V for harder rounds (Specify at order)

  • Insert jaws with carriers — Pyramid 0–30, 10–40, 20–50 mm; V Ø 5–32, 12–40, 16–44 mm (Specify at order)

  • Diamond-coated insert jaws — For flat or round specimens that are hard to grip (Specify at order)

  • Compression platen — 220 mm, mounted directly on the grip (Specify at order)

  • Pneumatic pistons — Double-acting, for powered jaw closing (Specify at order)

  • Temperature option — -40 to +280 °C (Specify at order)

  • Grip adapter and special jaws — Connect smaller grips; toothed-belt and long jaws (On request)

What's Included

  • One pair of wedge grips in the capacity ordered

  • Jaws are ordered separately, as standard jaws or insert jaws with carriers

  • Compression platens, pneumatic pistons and the extended temperature range are added at order

Supported Test Standards

  • ASTM E8 — Tension testing of metallic materials

  • ISO 6892-1 — Tensile testing of metallic materials at room temperature

  • ASTM B557 — Tension testing of wrought and cast aluminum and magnesium alloy products

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-WG-050 Mechanical Wedge Grip 600 kN

UGC-WG-050 Mechanical Wedge Grip 600 kN

Enclosed, crank-operated wedge grip for high-force tensile tests to 600 kN on flat specimens up to 40 mm thick.

UGC-WG-070 Wedge Grip for Round and Flat Samples 50 kN

UGC-WG-070 Wedge Grip for Round and Flat Samples 50 kN

Self-tightening 50 kN wedge grip with crank-set jaws for steel, plastic and wood; closing the front flap raises capacity

UGC-WG-040 Compact Wedge Grip for Small Chambers 50 kN

UGC-WG-040 Compact Wedge Grip for Small Chambers 50 kN

A short, screw-actuated 50 kN wedge grip built to fit small test chambers and hot cells used for testing radioactive spe

UGC-WG-080 Wide-Width Geotextile Wedge Grip 250 kN

UGC-WG-080 Wide-Width Geotextile Wedge Grip 250 kN

Wide wedge grips with interlocking wave jaws for wide-width geotextile tensile tests to ASTM D4595, in 250 kN and 350 kN

Low-Profile Universal Wedge Grips 100-300 kN FAQ

Why is the build height lower than other wedge grips?

The jaws are driven through a rear-side gear instead of a top-mounted mechanism, which keeps the grip short and leaves more daylight in the frame.

 

Can I close the jaws with a power tool?

Yes. The rear-side gear accepts a cordless screwdriver as well as the crank handle, and pneumatic pistons are available as an option.

 

Which materials is the 11° wedge suited to?

Round and flat specimens of aluminum, copper and steel up to 30 HRC.

 

What sizes are available?

100, 150, 250, 300 and 500 kN, weighing from 46 kg to 100 kg (101 to 220 lb) per grip without jaws.

 

Can the grips be used for compression too?

Yes. A 220 mm compression platen can be mounted directly on the grip; the 150 kN size is offered with a mounted platen.

 

What temperature range is available?

0 to +70 °C as standard, with a -40 to +280 °C option for use in an environmental chamber.

 

Need help configuring a wedge grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page