Home › Products › Compression Platens › Ball Bearing Compression Cage 10 kN





Ball Bearing Compression Cage 10 kN – 100 x 100 mm Platens
Ball-bearing guided cage rated to 10 kN for compression and tension tests, with 100 x 100 mm anodized aluminum platens and 250 mm of travel.
Brand: Universal Grip | Model: UGC-CC-020 | ● Configured to order
Ball-bearing guides for smooth, low-friction platen travel
Runs compression from the tensile stroke and can also be used for tension tests
100 x 100 mm (3.9 x 3.9 in) anodized aluminum platens
250 mm (9.8 in) travel distance for tall specimens
10 kN (about 2,248 lbf) maximum load
Larger sizes up to 400 x 400 mm and high-temperature guides on request
Downloads and standards
Trusted by Global Companies


























Low-friction compression cage for foams, elastomers and small parts
The UGC-CC-020 is a ball-bearing guided cage for laboratories that test soft or tall specimens such as foam, packaging, rubber parts and springs, and want the platens to stay parallel without guide friction adding to a small force reading. The cage runs compression tests from the machine's tensile stroke and can also be used for tension tests. It is rated to 10 kN (about 2,248 lbf).
How it works
Ball-bearing guides carry the moving platen, giving smooth travel with little friction and keeping the 100 x 100 mm (3.9 x 3.9 in) platens parallel over a 250 mm (9.8 in) travel distance. That length of stroke leaves room for tall specimens and for foams that compress a long way before densifying. The platens are anodized aluminum, and the cage weighs 7.3 kg (about 16 lb). The machine connection is a female clevis with a Ø 15.9 mm (5/8 in) or Ø 20 mm pin, with other couplings on request.
The standard cage is rated for 0 to +70 °C (32 to 158 °F). With special guides it can run up to 200, 260 or 350 °C (392, 500 or 662 °F) inside an environmental chamber.
Sizes
100 x 100 mm - 250 mm travel, standard
150 x 150 mm - 300 mm travel
200 x 200 mm - 300 mm travel
250 x 250 mm - 300 mm travel
300 x 300 mm - 400 mm travel
400 x 400 mm - 500 mm travel
The 10 kN rating applies to the standard 100 x 100 mm cage; ratings for the larger sizes are confirmed on request, and platen material is specified when you order.
Typical applications
Foams and packaging materials
Elastomers and rubber parts
Small components and springs
Temperature chamber testing
Machine fit
With its 10 kN rating and 15.9 mm clevis, the cage suits a Galdabini 10 kN benchtop UTM or larger frame; adapters cover other couplings. For bigger specimens and a -70 to +280 °C rating in one cage, see the UGC-CC-010 pull cage. Related setups are on our foam testing page and the compression platens overview.
Tell us the platen size, travel, coupling, platen material and maximum temperature you need, and we'll configure the cage: request a quote.
Ball Bearing Compression Cage 10 kN Specifications
MAX. LOAD
10 kN
TEST TYPE
Compression and tension
GUIDES
Ball bearings
PLATEN SIZE
100 x 100 mm
PLATEN MATERIAL
Anodized aluminum
TRAVEL DISTANCE
250 mm
COUPLING
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin; others on request
TEMPERATURE RANGE
0 to +70 °C; up to 200, 260 or 350 °C with special guides
WEIGHT
7.3 kg
DRAWINGS
Dimensional drawings; certified drawings and 3D models on request
PART REF.
UGC-CC-020
Models & Options
100 x 100 mm — 250 mm travel, standard, 10 kN (Specify at order)
150 x 150 mm — 300 mm travel (On request)
200 x 200 mm — 300 mm travel (On request)
250 x 250 mm — 300 mm travel (On request)
300 x 300 mm — 400 mm travel (On request)
400 x 400 mm — 500 mm travel (On request)
High-temperature guides — For use to 200, 260 or 350 °C (On request)
Platen material — Anodized aluminum standard; other materials specified at order (Specify at order)
What's Included
Ball-bearing compression cage with 100 x 100 mm anodized aluminum platens
Female clevis coupling, Ø 15.9 mm or Ø 20 mm pin, as ordered
Scope of supply for larger and high-temperature versions confirmed with your quote
Supported Test Standards
Standards list
Compatible Grips & Fixtures
10 kN Benchtop UTM — Galdabini frame matched to the 10 kN rating
Environmental Chambers — For the 200, 260 and 350 °C versions
UGC-CC-010 Pull Cage for Compression — Larger platens, -70 to +280 °C
Foam Testing — Foam and packaging compression setups
Elastomers Testing — Rubber part compression setups
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-CC-010 Pull Cage for Compression 140 x 200 mm
Four-column pull cage with 140 x 200 mm platens and 220 mm working space that turns machine tension into specimen compre
UGC-CC-030 Compression Cage with Ceramic Insert
Compact Ø 96 mm heavy-duty pull cage that redirects machine tension into specimen compression, with a ceramic insert at

Related 3

Related 4
Ball Bearing Compression Cage 10 kN FAQ
What load is the UGC-CC-020 rated for?
10 kN (about 2,248 lbf) for the standard 100 x 100 mm cage. Ratings for larger sizes are confirmed on request.
Why ball-bearing guides?
They give smooth, low-friction travel and keep the platens parallel, which matters when you test soft specimens at low forces.
Can I use it for tension tests too?
Yes. The cage is usable for both compression and tension tests.
What travel distance does it have?
250 mm on the standard 100 x 100 mm cage; larger sizes have 300 to 500 mm.
Can it be used at high temperature?
The standard cage is rated 0 to +70 °C. With special guides it can run to 200, 260 or 350 °C in an environmental chamber.
What coupling does it use?
A female clevis with a Ø 15.9 mm (5/8 in) or Ø 20 mm pin; other couplings and adapters are available.


