top of page

Home  ›  Products  ›  Hydraulic Grips  ›  Large Hydraulic Grip 1200 kN

UGC-HG-100 large opposed-cylinder hydraulic grip with 1200 kN clamping load by Universal Grip
UGC-HG-100 large opposed-cylinder hydraulic grip with 1200 kN clamping load by Universal Grip
UGC-HG-100 Large Hydraulic Grip 1200 kN by Universal Grip, view 2
Product photo 3
Product photo 4

Large Hydraulic Grip 1200 kN – Opposed-Cylinder Clamping

Enclosed, opposed-cylinder hydraulic grip that applies 1200 kN of clamping load to heavy plate, large-diameter bar, chain and structural components.

Brand: Universal Grip  |  Model: UGC-HG-100  |  ● Configured to order

  • 1200 kN (about 270,000 lbf) clamping load

  • Opposed hydraulic cylinders balance the clamping load across the specimen

  • Guided jaws inside an enclosed steel body

  • Front cover with handle for jaw access

  • Sized for large cross-sections and high-strength specimens

  • Machine connection built to your test frame

Standards: ASTM A370  ·  ISO 6892-1

Trusted by Global Companies

Very high-load hydraulic grip for large cross-sections

Once specimens reach a certain size, clamping force rather than frame capacity sets the limit on what a lab can pull. The UGC-HG-100 applies 1200 kN (about 270,000 lbf) of clamping load through two opposed hydraulic cylinders, for tensile tests on heavy steel plate, large-diameter bar, chain and heavy fittings, and structural components. It is aimed at steel producers, fabricators and lifting-gear makers whose specimens are too big and too strong for conventional grips.

 

Construction

The two cylinders close the jaws toward each other from opposite sides, so the clamping load is balanced across the specimen. The jaws run in guides inside an enclosed steel body, which keeps them square under very high force. A front cover with a handle opens for jaw access and gives a secure hand-hold when the grip is being positioned or serviced. Because both jaws travel, a specimen is clamped about the center of the grip rather than pushed against one fixed face.

 

Configured to your program

At this size the grip is engineered around the specimens it will hold. Maximum tensile load, jaw size and opening, jaw face, machine coupling and temperature range are all settled at quote stage from your specimen geometry and frame. Dimensional drawings and 3D models are available on request so your engineers can check the fit before ordering. Have the following ready when you contact us:

  • Specimen type, cross-section and length

  • Expected maximum test load

  • Machine model and crosshead connection

  • Preferred jaw face

  • The hydraulic power supply available

 

Typical applications

  • Heavy steel plate

  • Large-diameter bar

  • Structural components

  • Chain and heavy fittings

Metal specimens in these programs are commonly tested to ASTM A370 or ISO 6892-1.

 

Machine fit and related grips

A grip that clamps at 1200 kN belongs on a large Galdabini hydraulic universal testing machine; the range extends to 2,000 kN, and floor-standing frames are also an option depending on load. The connection is built for your machine. For smaller sections in the same opposed-cylinder style, the UGC-HG-010 clamps at 700 kN with throttle-controlled jaw speed; for full-size timber, the UGC-HG-030 spreads its load over segmented jaws.

Send us the details above and we will come back with a proposal and drawings: request a quote.

Hydraulic universal testing machines overview

At a glance

  • Clamping force: 1200 kN

  • Test type: Tension

  • Operation: Hydraulic, opposed cylinders

  • Jaws: Guided, in enclosed steel body

  • Access: Front cover with handle

  • Max. tensile load: On request

Large Hydraulic Grip 1200 kN Specifications

CLAMPING FORCE

1200 kN

 

TEST TYPE

Tension

 

OPERATION

Hydraulic, opposed cylinders

 

JAWS

Guided, in enclosed steel body

 

ACCESS

Front cover with handle

 

MAX. TENSILE LOAD

On request

 

JAW SIZE / OPENING

On request

 

COUPLING

Machine-specific, on request

 

BODY MATERIAL

Steel

 

TEMPERATURE RANGE

On request

 

PART REF.

UGC-HG-100

 

Models & Options

  • Jaw face — Chosen to suit the specimen surface (On request)

  • Jaw size and opening — Sized to your specimen cross-section (Specify at order)

  • Machine coupling — Built for your frame's connection (Specify at order)

  • Dimensional drawings / 3D models — Supplied so your engineers can check fit (On request)

What's Included

  • Hydraulic grip with two opposed cylinders and enclosed steel body

  • Guided jaws, configured to your specimen

  • Machine-specific coupling

  • Hydraulic power supply arrangement confirmed at quote

Supported Test Standards

  • ASTM A370 — Mechanical testing of steel plate, bar and components

  • ISO 6892-1 — Tensile test for metallic materials

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-HG-010 Hydraulic Grip 700 kN Clamping

UGC-HG-010 Hydraulic Grip 700 kN Clamping

Double-cylinder hydraulic grip that closes its jaws with 700 kN at 350 bar for high-load tension tests on steel, heavy p

UGC-HG-030 Large Hydraulic Grip for Wood 2000 kN

UGC-HG-030 Large Hydraulic Grip for Wood 2000 kN

Four-cylinder hydraulic grip with segmented serrated jaws for tension tests on full-size structural timber, glulam and L

UGC-HG-090 Hydraulic Non-Shift Wedge Grip 100 kN

UGC-HG-090 Hydraulic Non-Shift Wedge Grip 100 kN

Hydraulic wedge grip whose jaws hold their vertical position while the body closes them, so short and sensitive specimen

UGC-HG-110 Hydraulic Wedge Grip with Centering Device 250 kN

UGC-HG-110 Hydraulic Wedge Grip with Centering Device 250 kN

Hydraulic wedge grip with built-in specimen centering: Ø 160 mm pistons give 600 kN clamping at only 100 bar for a 250 k

Large Hydraulic Grip 1200 kN FAQ

What clamping load does the UGC-HG-100 apply?

1200 kN (about 270,000 lbf), through two opposed hydraulic cylinders.

 

What is the maximum tensile load?

It is set during configuration from your specimen and jaw choice, and confirmed in the quote.

 

How are the jaws accessed?

A front cover with a handle opens for jaw access; the jaws run in guides inside the enclosed steel body.

 

What kind of specimens is it for?

Heavy steel plate, large-diameter bar, structural components, chain and heavy fittings.

 

What frame does a 1200 kN grip need?

Large Galdabini hydraulic universal testing machines. The coupling is built for the specific frame.

 

Can I see drawings before ordering?

Yes. Dimensional drawings and 3D models are available on request.

 

Need help configuring a hydraulic grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page