top of page

Home  ›  Products  ›  Hydraulic Grips  ›  Large Hydraulic Grip for Wood 2000 kN

UGC-HG-030 large four-cylinder hydraulic grip for wood testing 2000 kN by Universal Grip
UGC-HG-030 large four-cylinder hydraulic grip for wood testing 2000 kN by Universal Grip
UGC-HG-030 Large Hydraulic Grip for Wood 2000 kN by Universal Grip, view 2
Product photo 3
Product photo 4

Large Hydraulic Grip for Wood 2000 kN – Full-Size Timber

Four-cylinder hydraulic grip with segmented serrated jaws for tension tests on full-size structural timber, glulam and LVL at loads up to 2000 kN.

Brand: Universal Grip  |  Model: UGC-HG-030  |  ● Configured to order

  • Rated for test loads up to 2000 kN (about 450,000 lbf)

  • Four hydraulic cylinders spaced along the clamping length

  • Segmented serrated jaws spread pressure so wood is not crushed

  • Long clamping length for structural timber cross-sections

  • Heavy steel frame with lifting eyes for crane handling

  • Clamping length, opening and coupling built to your machine

Standards: ASTM D198  ·  EN 408

Trusted by Global Companies

Hydraulic tension grip for full-size structural timber

Tension tests on structural lumber and engineered wood ask two things of a grip that pull against each other: it has to hold a very large load, and it must not crush the fibers it is holding. The UGC-HG-030 handles both by spreading its clamping force along a long, segmented jaw. It is rated for test loads up to 2000 kN (about 450,000 lbf) and is intended for timber research labs, glulam and LVL producers and testing bodies that pull full-size members rather than small clear specimens.

 

How it works

Four hydraulic cylinders sit in a row along the clamping length, each acting on its own jaw segment. Sharing the clamping force between segments keeps contact pressure on the wood moderate even when the total force is high, which reduces local crushing and premature failure at the grip line. Serrated segment faces key into the timber surface. The heavy steel frame carries lifting eyes, because a grip of this size is moved by crane or hoist, not by hand.

 

Built to the test program

Timber specimens vary widely in cross-section and in the anchorage length they need, so this grip is configured to the program rather than chosen from a size table. Clamping length, jaw opening, machine connection and weight are all confirmed at quote stage, together with the hydraulic supply that will drive the cylinders. Dimensional drawings and 3D models are available on request so you can check fit in the frame before ordering.

 

Typical applications

  • Structural timber in full section

  • Glulam and laminated veneer lumber (LVL)

  • Finger-jointed lumber

  • Wood-based panels

Programs of this kind are commonly run to methods such as ASTM D198 or EN 408, which cover tension tests on structural-size timber.

 

Machine fit

At 2000 kN the grip sits at the top of the Galdabini range, which runs from 2.5 kN to 2,000 kN, and it is matched to large hydraulic universal testing machines or heavy floor-standing frames. The connection is made for the specific machine, and adapters can bridge to an existing crosshead. For very high-load steel specimens instead of wood, the UGC-HG-100 applies 1200 kN of clamping load through opposed cylinders. More on setting up the test itself is on our tensile testing page.

Give us the timber cross-section, the clamping length you need, your machine connection and hydraulic supply, and we will scope the grip with you: request a quote.

Hydraulic universal testing machines overview

At a glance

  • Max. load: 2000 kN

  • Test type: Tension

  • Operation: Hydraulic, multi-cylinder

  • Cylinders: Four, along the clamping length

  • Jaw surface: Serrated, segmented jaws

  • Clamping length / opening: On request

Large Hydraulic Grip for Wood 2000 kN Specifications

MAX. LOAD

2000 kN

 

TEST TYPE

Tension

 

OPERATION

Hydraulic, multi-cylinder

 

CYLINDERS

Four, along the clamping length

 

JAW SURFACE

Serrated, segmented jaws

 

CLAMPING LENGTH / OPENING

On request

 

COUPLING

Machine-specific, on request

 

BODY MATERIAL

Steel frame with lifting eyes

 

WEIGHT

On request

 

PART REF.

UGC-HG-030

 

Models & Options

  • Clamping length — Sized to the timber cross-section and anchorage length (Specify at order)

  • Jaw opening — Set to the specimen thickness range (Specify at order)

  • Machine connection — Built to suit the test frame (Specify at order)

  • Drawings and 3D models — For checking fit before ordering (On request)

What's Included

  • Hydraulic grip with four cylinders and segmented serrated jaws

  • Steel frame with lifting eyes

  • Machine connection made to your frame

  • Hydraulic supply arrangement agreed at quote

Supported Test Standards

  • ASTM D198 — Static tests of lumber in structural sizes

  • EN 408 — Structural timber and glulam, physical and mechanical properties

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-HG-100 Large Hydraulic Grip 1200 kN

UGC-HG-100 Large Hydraulic Grip 1200 kN

Enclosed, opposed-cylinder hydraulic grip that applies 1200 kN of clamping load to heavy plate, large-diameter bar, chai

UGC-HG-020 Hydraulic Grip 170 kN Clamping

UGC-HG-020 Hydraulic Grip 170 kN Clamping

Single-cylinder hydraulic grip: an 80 mm piston drives one jaw against an adjustable counter jaw for 170 kN of clamping

UGC-HG-040 Single-Piston Hydraulic Geotextile Grip 250 kN

UGC-HG-040 Single-Piston Hydraulic Geotextile Grip 250 kN

Compact single-piston hydraulic grip for wide-width geotextile and geogrid tests, with 500 kN clamping at 450 bar and qu

UGC-HG-010 Hydraulic Grip 700 kN Clamping

UGC-HG-010 Hydraulic Grip 700 kN Clamping

Double-cylinder hydraulic grip that closes its jaws with 700 kN at 350 bar for high-load tension tests on steel, heavy p

Large Hydraulic Grip for Wood 2000 kN FAQ

What load is the UGC-HG-030 rated for?

Test loads up to 2000 kN (about 450,000 lbf) in tension.

 

Why does the grip use segmented jaws?

Four cylinders act on separate jaw segments along the clamping length. Spreading the force this way keeps contact pressure on the wood moderate and reduces crushing at the grip line.

 

Is this a catalog item or built to order?

It is configured to each test program. Clamping length, opening, machine connection and weight are confirmed at quote.

 

Which wood products can it test?

Structural timber, glulam, LVL, finger-jointed lumber and wood-based panels.

 

How is a grip this size handled?

The steel frame has lifting eyes for crane or hoist handling.

 

Which testing machines suit it?

Large Galdabini hydraulic universal testing machines at the top of the 2,000 kN range, with the connection made to suit.

 

Need help configuring a hydraulic grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page