Home › Products › Hydraulic Grips › Hydraulic Grip 700 kN Clamping





Hydraulic Grip 700 kN Clamping – Double-Cylinder
Double-cylinder hydraulic grip that closes its jaws with 700 kN at 350 bar for high-load tension tests on steel, heavy plate and large components.
Brand: Universal Grip | Model: UGC-HG-010 | ● Configured to order
700 kN (about 157,000 lbf) clamping force at 350 bar (5,075 psi)
Two opposed hydraulic cylinders close the jaws from both sides
Jaw closing speed set by two hydraulic throttles for repeatable clamping
Smooth (blank) jaw faces as standard; other faces on request
Robust steel body with jaw guide plates
Operating range 0 to +80 °C (32 to 176 °F)
Jaw size, opening and coupling configured to your machine
Standards: ASTM E8 · ISO 6892-1 · ASTM A370
Trusted by Global Companies


























Double-cylinder hydraulic grip for high-load tension tests
The UGC-HG-010 is a heavy-duty hydraulic grip for labs that pull high-strength steel, thick plate and bar, large structural specimens and heavy fasteners or components. Two opposed hydraulic cylinders close the jaws with up to 700 kN (about 157,000 lbf) of clamping force at 350 bar (5,075 psi). That reserve of clamping force keeps hard, smooth-surfaced specimens from creeping in the jaws as tensile load climbs, so failure happens in the gauge section instead of at the grip line.
How it works
Each cylinder pushes its own jaw toward the specimen, so clamping load is applied from both sides rather than against a fixed counter jaw. Two hydraulic throttles control how fast the jaws travel. A slower stroke gives the operator time to seat a heavy specimen and check its alignment before full pressure arrives; once the throttles are set, every specimen is closed on in the same way. Guide plates in the steel body keep the jaws square as they move, and the grip is rated for an operating range of 0 to +80 °C (32 to 176 °F).
Jaw faces and configuration
Smooth (blank) jaw faces are fitted as standard. They suit specimens that must not be marked and machined specimens whose shoulders or heads carry the load. Where a plain-sided specimen needs more bite, other faces can be made on request. Because a grip in this class is normally built around a specific test program, jaw size, jaw opening and the machine coupling are agreed at quote stage rather than picked from a catalog table, and dimensional drawings or 3D models are available before you order.
Typical applications
High-strength steel tensile specimens
Heavy plate and bar sections
Large structural specimens
Fasteners and components that need a high-force hold
The grip suits specimens for tests such as ASTM E8 and ISO 6892-1 on metallic materials, at cross-sections and loads beyond what manual wedge grips handle comfortably.
Machine fit
A 700 kN clamping grip belongs on a high-capacity frame. Galdabini hydraulic universal testing machines and floor-standing UTMs are the natural match, and the coupling is made to your machine; adapters are available for existing frames. For still larger sections, the UGC-HG-100 uses the same opposed-cylinder layout with 1200 kN of clamping load.
Send us your specimen geometry, machine coupling, preferred jaw face and the hydraulic power supply you have, and we will configure the grip: request a quote.
Hydraulic Grip 700 kN Clamping Specifications
CLAMPING FORCE
700 kN at 350 bar
TEST TYPE
Tension
ACTUATION
Two opposed hydraulic cylinders
CLOSING SPEED
Adjustable by two hydraulic throttles
JAW SURFACE
Smooth (blank); other faces on request
JAW SIZE / OPENING
On request
COUPLING
On request, matched to machine
BODY MATERIAL
Steel, with jaw guide plates
TEMPERATURE RANGE
0 to +80 °C
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-HG-010
Models & Options
Smooth (blank) jaws — Standard face for unmarked or shouldered specimens (Specify at order)
Other jaw faces — Alternative faces for plain-sided specimens that need more grip (On request)
Machine coupling — Made to suit your frame's connection (Specify at order)
Coupling adapters — For mounting on an existing machine coupling (On request)
What's Included
Hydraulic grip with two opposed cylinders and two speed throttles
Smooth (blank) jaws as the standard face
Coupling made to your machine, specified at order
Hydraulic power supply: tell us what you have; scope confirmed at quote
Supported Test Standards
ASTM E8 — Tension testing of metallic materials
ISO 6892-1 — Tensile testing of metallic materials at room temperature
ASTM A370 — Mechanical testing of steel products
Compatible Grips & Fixtures
Hydraulic UTMs — High-capacity Galdabini frames for 700 kN-class gripping
Floor-Standing UTMs — Large Galdabini frames for metals testing
UGC-HG-100 Large Hydraulic Grip 1200 kN — Same opposed-cylinder layout, higher clamping load
Adapters — Couplings to fit the grip to an existing frame
Metals Testing — Tensile setups for steel plate, bar and components
“Customer quote”
Related Equipment
UGC-HG-100 Large Hydraulic Grip 1200 kN
Enclosed, opposed-cylinder hydraulic grip that applies 1200 kN of clamping load to heavy plate, large-diameter bar, chai
UGC-HG-020 Hydraulic Grip 170 kN Clamping
Single-cylinder hydraulic grip: an 80 mm piston drives one jaw against an adjustable counter jaw for 170 kN of clamping
UGC-HG-030 Large Hydraulic Grip for Wood 2000 kN
Four-cylinder hydraulic grip with segmented serrated jaws for tension tests on full-size structural timber, glulam and L
UGC-HG-040 Single-Piston Hydraulic Geotextile Grip 250 kN
Compact single-piston hydraulic grip for wide-width geotextile and geogrid tests, with 500 kN clamping at 450 bar and qu
Hydraulic Grip 700 kN Clamping FAQ
How much clamping force does the UGC-HG-010 develop?
700 kN (about 157,000 lbf) at a hydraulic pressure of 350 bar (5,075 psi).
What is its maximum tensile load?
The data sheet rates clamping force. Maximum tensile load depends on the jaw and coupling configuration and is confirmed with your quote.
Can I control how fast the jaws close?
Yes. Two hydraulic throttles set the jaw closing speed, so heavy specimens can be seated and aligned before full clamping force is reached.
Which jaw faces are available?
Smooth (blank) faces are standard. Other faces are made on request for specimens that need more bite.
What temperature range is the grip rated for?
0 to +80 °C (32 to 176 °F).
Which testing machines does it fit?
High-capacity frames such as Galdabini hydraulic universal testing machines. The coupling is made to your machine, and adapters are available.




