Home › Products › Wedge Grips › Manual Non-Shift Wedge Grips 50-250 kN





Manual Non-Shift Wedge Grips 50-250 kN – No Clamping Preload
Manual wedge grips that close without moving the specimen axially, in 50, 100 and 250 kN sizes for flat and round specimens from -20 to +180 °C.
Brand: Universal Grip | Model: UGC-WG-130 | ● Configured to order
Non-shift clamping avoids unwanted preload before the test
Wedge action adds clamping force as tensile load rises
Sizes of 50, 100 and 250 kN (11,240 to 56,200 lbf)
Serrated jaws for flat specimens, V-jaws for round bar and wire
Operating range -20 to +180 °C (-4 to +356 °F)
Motorized 100 kN version for powered clamping
Standards: ASTM E8 · ISO 6892-1 · ASTM D638
Trusted by Global Companies


























Manual wedge grips that clamp without pulling the specimen
When a conventional wedge grip closes, the jaws slide along the wedge and can pull the specimen axially. The result is a preload that shows up before the test begins, which is a nuisance on metals and a real problem on plastics, composites and low-modulus materials. The UGC-WG-130 avoids it: the jaws close onto the specimen without moving it along the load axis, so the test starts from zero. Once tension is applied, the wedge effect increases the clamping force as usual.
Sizes and jaw ranges
50 kN: jaws 30 x 55 mm; flat 0–9 or 9–18 mm, round Ø 3–10 or 10–16 mm; clevis for a 31.8 mm (1-1/4 in) pin; 7.2 kg (15.9 lb) per grip
100 kN: jaws 40 x 60 mm; flat 0–9 or 9–18 mm, round Ø 3–20 mm; clevis for a 40 mm pin; 12.6 kg (27.8 lb) per grip
250 kN: jaws 50 x 100 mm with a closed back side; flat 0–40 mm, round Ø 4–40 mm; clevis for a 60 mm pin; 44.8 kg (98.8 lb) per grip
Weights include jaws. All bodies are nickel-plated steel with hardened jaws.
Special versions
A motorized 100 kN version provides powered clamping over a 0–16 mm range for labs that want to take operator effort out of the setup. A 100 kN cryogenic chamber special with pull rods works from -180 to +40 °C. The standard grips run from -20 to +180 °C, so they can be used in an environmental chamber without modification; other ranges are available on request.
Typical applications
Metal flat and round specimens, plastics and composites, rigid cellular plastics, and low-temperature testing. Metal specimens are typical of tests such as ASTM E8 and ISO 6892-1; plastic bars of tests such as ASTM D638.
Choosing a non-shift grip
Universal Grip offers the non-shift principle in several forms. The UGC-WG-150 non-shift wedge grip covers 20 to 150 kN with an open construction for extra-wide jaws, and the UGC-WG-020 heavy duty grip carries it to 600 kN. If you need air-operated, non-shift clamping at 10 to 20 kN, for example on ceramics, see the UGC-PG-170 pneumatic non-shift wedge grip.
For the frame, the 50 kN size suits a Galdabini 50 kN benchtop machine, the 100 kN size a 100 kN frame, and the 250 kN size a floor-standing testing machine.
Specify the capacity, specimen geometry and size range, jaw sets, coupling and temperature range, and we will put together your quote. Request a quote.
Mechanical wedge grips
At a glance
Max. load: 50, 100 or 250 kN
Test type: Tensile
Clamping principle: Wedge, non-shift
Jaw opening: Flat 0–40 mm; round Ø 3–40 mm (by size and jaws)
Clamping surface: 30 x 55 mm (50 kN); 40 x 60 mm (100 kN); 50 x 100 mm (250 kN)
Coupling: Female clevis Ø 31.8 mm (1-1/4 in) pin (50 kN); Ø 40 mm (100 kN); Ø 60 mm (250 kN)
Manual Non-Shift Wedge Grips 50-250 kN Specifications
MAX. LOAD
50, 100 or 250 kN
TEST TYPE
Tensile
CLAMPING PRINCIPLE
Wedge, non-shift
JAW OPENING
Flat 0–40 mm; round Ø 3–40 mm (by size and jaws)
CLAMPING SURFACE
30 x 55 mm (50 kN); 40 x 60 mm (100 kN); 50 x 100 mm (250 kN)
COUPLING
Female clevis Ø 31.8 mm (1-1/4 in) pin (50 kN); Ø 40 mm (100 kN); Ø 60 mm (250 kN)
MATERIAL
Steel, nickel-plated; jaws hardened
TEMPERATURE RANGE
-20 to +180 °C (other ranges on request)
WEIGHT PER GRIP
7.2 kg (50 kN), 12.6 kg (100 kN), 44.8 kg (250 kN) incl. jaws
OPERATION
Manual (motorized 100 kN version available)
PART REF.
UGC-WG-130
Models & Options
Name — Description (Part #)
50 kN — Flat 0–9 / 9–18 mm; round Ø 3–10 / 10–16 mm (Specify at order)
100 kN — Flat 0–9 / 9–18 mm; round Ø 3–20 mm (Specify at order)
250 kN — Flat 0–40 mm; round Ø 4–40 mm; closed back side (Specify at order)
100 kN motorized — Clamping range 0–16 mm (Specify at order)
100 kN cryogenic chamber special — -180 to +40 °C with pull rods; used for tests such as ISO 1926 (On request)
Other temperature ranges — Outside -20 to +180 °C (On request)
What's Included
One pair of manual non-shift wedge grips in the size ordered
Pyramid or V-jaw sets selected for your specimen range and quoted with the grips
Clevis coupling for the size ordered
Supported Test Standards
ASTM E8 — Tension testing of metallic materials
ISO 6892-1 — Tensile testing of metallic materials at room temperature
ASTM D638 — Tensile properties of plastics
Compatible Grips & Fixtures
50 kN Benchtop Testing Machine — Galdabini frame for the 50 kN size
100 kN Benchtop Testing Machine — Galdabini frame for the 100 kN size
Floor-Standing Testing Machines — For the 250 kN size
Pneumatic Non-Shift Wedge Grip 10-20 kN — Air-operated non-shift sibling
Non-Shift Wedge Grip 20-50 kN — Self-clamping non-shift grips with wide jaws
Environmental Chambers — For tests within -20 to +180 °C
“Customer quote”
Related Equipment
UGC-WG-020 Heavy Duty Wedge Grip 600 kN
Non-shift wedge grips for high-strength plate, bar and rod up to 600 kN, with jaws for flat specimens to 50 mm and round
UGC-WG-150 Non-Shift Wedge Grip 20-50 kN
Self-clamping non-shift wedge grips whose jaws move only horizontally, in 20 and 50 kN sizes with 100 and 150 kN version
UGC-WG-120 Screw Action Wedge Grip 10 kN
10 kN grip that combines screw pre-tension with self-tightening wedge action for elastic, hard-to-hold specimens, with o
UGC-WG-140 Pneumatic Wedge Grip 10-20 kN
Pneumatic wedge grips with the control piston outside the chamber, for -70 to +350 °C tests on short, low-friction speci
Manual Non-Shift Wedge Grips 50-250 kN FAQ
What does non-shift mean?
The jaws close onto the specimen without moving it along the load axis, so no unwanted preload is introduced before the test starts.
Does the grip still self-tighten?
Yes. Under tensile load the wedge effect increases the clamping force.
Which sizes are available?
50, 100 and 250 kN, weighing 7.2, 12.6 and 44.8 kg per grip including jaws.
Is there a powered version?
A motorized 100 kN version clamps over a 0–16 mm range.
What temperature range is covered?
-20 to +180 °C as standard. A 100 kN cryogenic chamber special with pull rods covers -180 to +40 °C.
Is there a pneumatic non-shift grip?
Yes, for 10 to 20 kN see the UGC-PG-170 pneumatic non-shift wedge grip.




