Home › Products › Compression Platens › Rectangular Steel Compression Platen 100 x 200 mm





Rectangular Steel Compression Platen 100 x 200 mm – 50 kN
Nickel-plated steel compression platen with a 100 x 200 mm loading face, rated to 50 kN, for elongated specimens and sample-prep pressing.
Brand: Universal Grip | Model: UGC-CP-020 | ● Configured to order
100 x 200 mm (3.9 x 7.9 in) loading face for elongated and rectangular specimens
Rated to 50 kN (about 11,240 lbf) maximum load
Nickel-plated steel resists wear and corrosion
Female clevis coupling, Ø 38 mm with 16 mm pin; others via adapter
Optional two-column guide system with ball bearings for parallel platen travel
Also used as a pressing platen for sample preparation
Downloads and standards
Trusted by Global Companies


























A rectangular steel platen for elongated compression specimens
Round platens waste most of their face on a long, narrow specimen and can leave the ends unsupported. The UGC-CP-020 solves that with a rectangular 100 x 200 mm (3.9 x 7.9 in) loading face in nickel-plated steel, rated to 50 kN (about 11,240 lbf). It suits test labs and production QC teams compressing rectangular metal and plastic parts, building material samples and other specimens that are longer than they are wide.
Design
The platen is machined from steel and nickel-plated, which gives a hard, wear-resistant face that also stands up to moisture from building materials and the handling that comes with daily use. It connects to the testing machine through a female clevis coupling with a 38 mm (1.5 in) diameter and a 16 mm (0.63 in) pin. If your frame uses a different connection, we supply an adapter rather than a one-off platen.
Single platen, pair or guided set
The UGC-CP-020 can be ordered three ways:
Single platen to work against a lower platen you already have.
Upper and lower pair, so both faces match in size and finish.
Guided pair with two columns running in ball bearings. The guides keep the platens parallel during loading, which matters when a long specimen fails at one end first and would otherwise tilt the upper platen.
Typical applications
General compression testing of rectangular metal and plastic parts, compression of building material samples, and pressing tasks during sample preparation, where the platen is used to flatten, seat or form material rather than to measure a property. For other rectangular sizes, including perforated versions, compare the UGC-CP-180 rectangular compression platens; round faces are covered by the UGC-CP-170 round compression platens.
Machine fit
With a 50 kN rating, the platen pairs naturally with a Galdabini 50 kN benchtop universal testing machine, or with a 100 kN frame if you want capacity in reserve for other work. Keep the test load at or below the platen's 50 kN rating whichever frame you use.
To configure yours, tell us your machine coupling, whether you need a matching lower platen and guide columns, and the test temperature if it is not ambient, then request a quote.
Rectangular Steel Compression Platen 100 x 200 mm Specifications
MAX. LOAD
50 kN
TEST TYPE
Compression
PLATEN SIZE
100 x 200 mm
MATERIAL
Steel, nickel-plated
COUPLING
Female clevis, Ø 38 mm, 16 mm pin; others via adapter
GUIDE SYSTEM
2 columns with ball bearings (on request)
LOWER PLATEN
Matching lower platen on request
TEMPERATURE RANGE
On request
WEIGHT
On request
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-CP-020
Models & Options
Single platen — 100 x 200 mm nickel-plated steel platen, 50 kN, female clevis Ø 38 mm / 16 mm pin (Specify at order)
Matching lower platen — Second 100 x 200 mm platen to make an upper and lower pair (On request)
Guide columns — Two columns with ball bearings that keep the platens parallel (On request)
Other machine coupling — Adapter to suit your frame's connection (On request)
Non-ambient testing — Tell us the test temperature at order (On request)
What's Included
One 100 x 200 mm nickel-plated steel compression platen
Female clevis coupling, Ø 38 mm with 16 mm pin
Matching lower platen and two-column guide system only if specified at order
Coupling adapters for other machine connections on request
Supported Test Standards
Standards list
Compatible Grips & Fixtures
50 kN Benchtop Testing Machine — Galdabini frame matched to the platen's 50 kN rating
100 kN Benchtop Testing Machine — Frame with capacity in reserve for other tests
UGC-CP-180 Rectangular Compression Platens — Other rectangular sizes, including perforated platens
Compression Testing — Setups for rectangular parts and building materials
Adapters — Couplings for frames without a 38 mm clevis
“Customer quote”
Related Equipment
UGC-CP-170 Round Compression Platens
Matched pairs of round compression platens in eight diameters from 56 to 344 mm, in anodized aluminum or 58 HRC hardened
UGC-CP-180 Rectangular Compression Platens
Square and rectangular compression platens in anodized aluminum, hardened steel or perforated aluminum for foam, packagi
UGC-CP-010 Compression Platens with Guide Bars
Anodized aluminum compression platens on ball-bearing guide bars that stay parallel when cartons, boxes or chairs fail o
UGC-CP-030 Heated Compression Platen 280 C
Electrically heated Ø 150 mm compression platen with its own controller, for compression tests up to 280 °C and 20 kN wi
Rectangular Steel Compression Platen 100 x 200 mm FAQ
What is the loading face size?
100 x 200 mm, or about 3.9 x 7.9 in, which suits elongated and rectangular specimens.
How much load can the platen take?
It is rated to 50 kN maximum, about 11,240 lbf.
What coupling does it have?
A female clevis, Ø 38 mm with a 16 mm pin. Other machine connections are handled with adapters.
Is it supplied as a pair?
The base item is a single platen. A matching lower platen and a two-column guide system with ball bearings are available on request.
Why add guide columns?
Guides keep the platens parallel during loading, so a long specimen that fails at one end does not tilt the upper platen.
Can it be used for sample preparation?
Yes. Besides compression testing, the platen is used for pressing tasks during sample preparation.




