top of page

Home  ›  Products  ›  Compression Platens  ›  Compression Platens with Guide Bars

UGC-CP-010 anodized aluminum compression platens with ball-bearing guide bars by Universal Grip
UGC-CP-010 anodized aluminum compression platens with ball-bearing guide bars by Universal Grip
UGC-CP-010 Compression Platens with Guide Bars by Universal Grip, view 2
UGC-CP-010 Compression Platens with Guide Bars by Universal Grip, view 3
UGC-CP-010 Compression Platens with Guide Bars by Universal Grip, view 4

Compression Platens with Guide Bars – Aluminum, up to 400 x 600 mm

Anodized aluminum compression platens on ball-bearing guide bars that stay parallel when cartons, boxes or chairs fail off-center.

Brand: Universal Grip  |  Model: UGC-CP-010  |  ● Configured to order

  • Ball-bearing guide bars keep the upper platen parallel when specimens fail off-center

  • Guides take transverse force and torque so the load cell sees only axial load

  • Platen sizes 400 x 400 mm or 400 x 600 mm, plus a compact 200 x 300 mm cage

  • Anodized aluminum platens, 30 mm thick on the 400 x 400 mm size, for low moving mass

  • T-slots in the platen face for stops, centering guides and other accessories

  • Female clevis coupling with 15.9 mm (5/8 in) pin; other couplings via adapter

Standards: ASTM D642

Trusted by Global Companies

Guided compression platens for cartons, boxes and bulky specimens

The UGC-CP-010 is a set of large anodized aluminum compression platens running in a guide frame on ball-bearing guide bars. It is built for packaging labs, furniture test benches and QC teams who compress specimens that are too big, too soft or too lopsided for a plain pair of platens. Platen sizes run from a compact 200 x 300 mm (7.9 x 11.8 in) cage up to 400 x 600 mm (15.7 x 23.6 in), so a full shipping carton or a chair seat can sit on the lower platen without overhanging the edges.

 

How the guide bars work

When a box buckles at one corner or a chair seat loads unevenly, an unguided upper platen starts to tilt. That tilt pushes side load and torque into the load cell and changes the contact area partway through the test. On the UGC-CP-010 the upper platen travels on ball-bearing guide bars, so it stays parallel to the lower platen however the specimen collapses. The guide frame absorbs the transverse forces and torque, and the load cell measures the axial compression it is meant to measure. The 400 mm platens run on four 800 mm (31.5 in) guide bars; the 200 x 300 mm version is a compression cage on two guide bars.

 

Construction

  • Anodized aluminum platens, 30 mm (1.18 in) thick on the 400 x 400 mm size, keep the moving mass low.

  • T-slots in the platen face (five on the 400 x 400 mm platen) let you bolt down stops, centering guides or other accessories.

  • Top frame mounts directly in the testing machine. The standard coupling is a female clevis with a 15.9 mm (5/8 in) pin; other machine connections are handled with our adapters.

 

Typical applications

Crush and stacking tests on corrugated cartons and boxes, general packaging compression, chairs and furniture components, and large foam or molded parts. For shipping containers the setup suits tests such as ASTM D642. Large foam blocks and cushioning parts are covered on our foam testing page, and the wider range of platens is on the compression platens overview.

 

Choosing a configuration

Maximum load depends on the coupling size and the cage version, so it is fixed when we configure the system rather than quoted as a single number. Tell us the platen size, the number and length of guide bars, your machine coupling and the load cell the cage will be used with, for example 5 kN or 50 kN (about 1,124 lbf or 11,240 lbf). Galdabini benchtop universal testing machines cover that load range; tall cartons or furniture that need more daylight are better served by a floor-standing frame. If you need a flat mounting base with T-slots rather than a guided pair, look at the UGC-CP-190 T-groove compression platens.

Send your largest specimen size, machine coupling and load cell capacity through Request a quote and we'll configure the guided platens for your frame.

Product video

At a glance

  • Max. load: Depends on coupling size and cage version (on request)

  • Test type: Compression

  • Platen size: 400 x 400 mm, 400 x 600 mm or 200 x 300 mm

  • Guide bars: 4x 800 mm (400 mm platens); 2x (200 x 300 mm cage)

  • Platen thickness: 30 mm (400 x 400 mm)

  • T-slots: 5 on the 400 x 400 mm platen

Compression Platens with Guide Bars Specifications

MAX. LOAD

Depends on coupling size and cage version (on request)

 

TEST TYPE

Compression

 

PLATEN SIZE

400 x 400 mm, 400 x 600 mm or 200 x 300 mm

 

GUIDE BARS

4x 800 mm (400 mm platens); 2x (200 x 300 mm cage)

 

PLATEN THICKNESS

30 mm (400 x 400 mm)

 

T-SLOTS

5 on the 400 x 400 mm platen

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin; others via adapter

 

MATERIAL

Aluminum, anodized; ball-bearing guides

 

DRAWINGS

Dimensional drawings on the data sheet; certified drawings and 3D models on request

 

PART REF.

UGC-CP-010

 

Models & Options

  • 400 x 400 mm guided platens — Anodized aluminum platens on 4x 800 mm guide bars (Specify at order)

  • 400 x 600 mm guided platens — Anodized aluminum platens on 4x 800 mm guide bars (Specify at order)

  • 200 x 300 mm compression cage — Compact aluminum compression cage on 2x guide bars (Specify at order)

  • Guide bar number and length — Chosen to suit your specimen height and platen size (Specify at order)

  • Machine coupling — Female clevis 15.9 mm standard; other couplings via adapter (On request)

What's Included

  • Upper and lower anodized aluminum compression platens in a guide frame, in the size ordered

  • Ball-bearing guide bars: 4x 800 mm on the 400 mm platens, 2x on the 200 x 300 mm cage

  • Top frame with machine coupling (female clevis, 15.9 mm pin, or as specified)

  • Load cell and testing machine not included; tell us the load cell capacity the cage will run with

Supported Test Standards

  • ASTM D642 — Compressive resistance of shipping containers and components

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-CP-150 Small Compression Platens with Foldable Guides

UGC-CP-150 Small Compression Platens with Foldable Guides

Small nickel-plated steel platens with two foldable V-jaw guide arms that center ceramic cylinders before loading, for t

UGC-CP-190 T-Groove Compression Platens

UGC-CP-190 T-Groove Compression Platens

T-slotted platens in anodized aluminum or nickel-plated steel that give you a flat base for mounting grips, fixtures and

UGC-CP-020 Rectangular Steel Compression Platen 100 x 200 mm

UGC-CP-020 Rectangular Steel Compression Platen 100 x 200 mm

Nickel-plated steel compression platen with a 100 x 200 mm loading face, rated to 50 kN, for elongated specimens and sam

UGC-CP-030 Heated Compression Platen 280 C

UGC-CP-030 Heated Compression Platen 280 C

Electrically heated Ø 150 mm compression platen with its own controller, for compression tests up to 280 °C and 20 kN wi

Compression Platens with Guide Bars FAQ

Why use guided compression platens instead of a plain pair?

Cartons, boxes and chairs often fail off-center and tilt an unguided platen. The ball-bearing guide bars keep the platens parallel and take transverse forces and torque off the load cell.

 

Which platen sizes are available?

400 x 400 mm and 400 x 600 mm aluminum platens on four 800 mm guide bars, and a compact 200 x 300 mm compression cage on two guide bars.

 

What is the maximum load?

It depends on the coupling size and the cage version, so it is confirmed when we configure your system. Tell us the load cell you will use, for example 5 kN or 50 kN.

 

What coupling does it use?

A female clevis with a 15.9 mm (5/8 in) pin as standard. Other machine connections are made with adapters.

 

Can I mount accessories on the platens?

Yes. The platen face has T-slots, five on the 400 x 400 mm platen, for stops, centering guides and similar accessories.

 

Is it suited to box compression testing?

Yes. It is used for crush and stacking tests on corrugated cartons and boxes, including tests such as ASTM D642. Give us your largest box size so we can confirm platen size and guide length.

 

Need help configuring a compression platen?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page