Home › Products › Compression Platens › Round Compression Platens





Round Compression Platens – Aluminum and Hardened Steel
Matched pairs of round compression platens in eight diameters from 56 to 344 mm, in anodized aluminum or 58 HRC hardened steel, ground flat to 0.02 mm.
Brand: Universal Grip | Model: UGC-CP-170 | ● Configured to order
Matched pairs in eight diameters from 56 to 344 mm (2.2 to 13.5 in)
Anodized aluminum for foams, cardboard and soft plastics
Hardened steel (58 HRC), nickel-plated, for metals, rigid plastics and stone
Flatness tolerance 0.02 mm (0.0008 in) for even load distribution
Female clevis couplings Ø 15.9, 20 or 31.8 mm; others via adapter
Steel rated to +280 °C (536 °F), aluminum to +180 °C (356 °F)
Special versions with threaded holes, centering rings or TiN coating
Standards: ASTM D1621 · ISO 844 · ISO 13314
Trusted by Global Companies


























Round compression platens for general compression testing
The UGC-CP-170 is our standard range of round compression platens, supplied as matched upper and lower pairs for universal testing machines. They are the everyday tooling for compression tests on foams, cardboard, plastics, metals, stone, concrete, ceramics and finished parts. Two materials let you match the platen to the specimen: anodized aluminum for soft materials and hardened steel for hard ones.
Aluminum or steel
Anodized aluminum platens are light and suit lower-force tests on foams, cardboard and soft plastics, where a heavy steel platen would only add mass to the load string. They are rated from -70 to +180 °C (-94 to 356 °F). Hardened steel platens are hardened to 58 HRC and nickel-plated, so they resist indentation from metals, rigid plastics and stone and keep their faces flat at high loads. They are rated from -70 to +280 °C (-94 to 536 °F), which makes them a good fit for tests inside an environmental chamber.
Both materials are ground flat to 0.02 mm (0.0008 in), so load is spread evenly across the specimen face instead of concentrating on a high spot.
Sizes and couplings
Pairs are available in eight diameters: 56, 96, 116, 156, 196, 246, 296 and 344 mm (about 2.2 to 13.5 in). Standard couplings are female clevis for a Ø 15.9 mm (5/8 in), Ø 20 mm or Ø 31.8 mm (1-1/4 in) pin; other machine connections are made through adapters. Weight runs from about 0.1 kg to 7.8 kg (0.2 to 17.2 lb) per platen, depending on size and material.
Maximum load
Maximum load is set by the coupling rather than the platen face. As an example, a Ø 196 mm steel platen with a 60 mm coupling is rated to 300 kN (about 67,440 lbf). Tell us your maximum test load and we will pair the platen with a coupling that carries it.
Typical applications
Foams, cardboard and soft plastics
Metals and rigid plastics
Stone, concrete and ceramics
Components and finished parts
Round platens suit rigid foam compression tests such as ASTM D1621 and ISO 844, and hardened steel platens suit tests on porous and cellular metals such as ISO 13314.
Special versions and machine fit
On request, platens can be made with threaded holes for mounting accessories, centering rings to locate specimens, or a TiN (titanium nitride) coating for a harder, more wear-resistant face. Small aluminum pairs also work on motorized force testers such as our 1,500 lb tester through an adapter, while larger steel pairs go on Galdabini universal testing machines from 2.5 kN to 2,000 kN. For square, rectangular or perforated faces, see UGC-CP-180 rectangular compression platens; for self-aligning and specialty platens, see the full compression platens range.
Tell us the platen diameter, material, machine coupling and maximum test load, and we will quote the pair.
Product video
At a glance
Max. load: Depends on coupling size (e.g. 300 kN for Ø 196 mm steel)
Test type: Compression
Platen diameter: 56, 96, 116, 156, 196, 246, 296, 344 mm
Material: Aluminum, anodized; or hardened steel 58 HRC, nickel-plated
Flatness: 0.02 mm
Temperature range: -70 to +180 °C (aluminum); -70 to +280 °C (steel)
Round Compression Platens Specifications
MAX. LOAD
Depends on coupling size (e.g. 300 kN for Ø 196 mm steel)
TEST TYPE
Compression
PLATEN DIAMETER
56, 96, 116, 156, 196, 246, 296, 344 mm
MATERIAL
Aluminum, anodized; or hardened steel 58 HRC, nickel-plated
FLATNESS
0.02 mm
TEMPERATURE RANGE
-70 to +180 °C (aluminum); -70 to +280 °C (steel)
COUPLING
Female clevis Ø 15.9 mm (5/8 in), Ø 20 mm or Ø 31.8 mm (1-1/4 in); others via adapter
WEIGHT
Approx. 0.1 to 7.8 kg per platen, by size and material
SCOPE OF SUPPLY
1 pair of platens
DRAWINGS
Dimensional drawings on data sheet; certified drawings and 3D models on request
PART REF.
UGC-CP-170
Models & Options
Ø 56 mm pair — Aluminum or steel (Specify at order)
Ø 96 mm pair — Aluminum or steel (Specify at order)
Ø 116 mm pair — Aluminum or steel (Specify at order)
Ø 156 mm pair — Aluminum or steel (Specify at order)
Ø 196 mm pair — Aluminum or steel; steel rated to 300 kN with a 60 mm coupling (Specify at order)
Ø 246 mm pair — Aluminum or steel (Specify at order)
Ø 296 mm pair — Aluminum or steel (Specify at order)
Ø 344 mm pair — Hardened steel (Specify at order)
Special versions — Threaded holes, centering rings or TiN coating (On request)
What's Included
1 matched pair of round compression platens (upper and lower)
Coupling as specified: female clevis Ø 15.9, 20 or 31.8 mm
Adapters for other machine connections on request
Supported Test Standards
ASTM D1621 — Compressive properties of rigid cellular plastics
ISO 844 — Rigid cellular plastics: determination of compression properties
ISO 13314 — Compression test for porous and cellular metals
Compatible Grips & Fixtures
Universal Testing Machines — Galdabini frames from 2.5 kN to 2,000 kN
1,500 lb Motorized Tester — Small aluminum pairs for low-force compression, via adapter
UGC-CP-180 Rectangular Compression Platens — Square, rectangular and perforated faces
Environmental Chambers — Steel platens rated to +280 °C
Foam Testing — Compression setups for flexible and rigid foams
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-CP-020 Rectangular Steel Compression Platen 100 x 200 mm
Nickel-plated steel compression platen with a 100 x 200 mm loading face, rated to 50 kN, for elongated specimens and sam
UGC-CP-180 Rectangular Compression Platens
Square and rectangular compression platens in anodized aluminum, hardened steel or perforated aluminum for foam, packagi
UGC-CP-150 Small Compression Platens with Foldable Guides
Small nickel-plated steel platens with two foldable V-jaw guide arms that center ceramic cylinders before loading, for t
UGC-CP-100 Compression Spring Test Fixture
Guide-pin fixture that centers helical springs and stops buckling during compression tests, with pin size and coupling m
Round Compression Platens FAQ
Should I choose aluminum or steel platens?
Aluminum for foams, cardboard and soft plastics. Hardened 58 HRC steel for metals, rigid plastics, stone and other hard specimens that would dent a softer face.
What sizes are available?
Eight diameters: 56, 96, 116, 156, 196, 246, 296 and 344 mm, supplied as matched pairs.
What is the maximum load?
It depends on the coupling. For example, a Ø 196 mm steel platen with a 60 mm coupling is rated to 300 kN (about 67,440 lbf).
How flat are the platens?
Both materials are ground flat to 0.02 mm (0.0008 in).
Can they be used in a temperature chamber?
Yes, within their ratings: -70 to +180 °C for aluminum and -70 to +280 °C for steel. See our environmental chambers.
Which couplings are standard?
Female clevis for a Ø 15.9 mm (5/8 in), 20 mm or 31.8 mm (1-1/4 in) pin. Other connections are made with adapters.
Is one platen or a pair supplied?
A matched pair: one upper and one lower platen.




