top of page

Home  ›  Products  ›  Compression Platens  ›  T-Groove Compression Platens

UGC-CP-190 T-groove compression platen with parallel T-slots for mounting fixtures and grips by Universal Grip
UGC-CP-190 T-groove compression platen with parallel T-slots for mounting fixtures and grips by Universal Grip
UGC-CP-190 T-Groove Compression Platens by Universal Grip, view 2
UGC-CP-190 T-Groove Compression Platens by Universal Grip, view 3
UGC-CP-190 T-Groove Compression Platens by Universal Grip, view 4

T-Groove Compression Platens – Aluminum or Steel

T-slotted platens in anodized aluminum or nickel-plated steel that give you a flat base for mounting grips, fixtures and large specimens on the tester.

Brand: Universal Grip  |  Model: UGC-CP-190  |  ● Configured to order

  • Parallel T-slots for flexible mounting of fixtures, grips and specimens

  • Mounts to the machine with four threaded holes or a clevis adapter

  • Three standard sizes: 250 x 250, 220 x 400 and 380 x 400 mm

  • Anodized aluminum from 4 kg, or heavier nickel-plated steel

  • Can carry a chuck or vise grip for clamping large specimens

  • Usable on single-column testers with a grip mounted on the platen

  • Custom versions with diagonal slots or cut-outs on request

Downloads and standards

Trusted by Global Companies

T-slotted platens for mounting grips, fixtures and large specimens

The UGC-CP-190 T-groove platens turn the machine connection into a flat, slotted mounting table. Instead of building a separate adapter for every odd-shaped part, you bolt fixtures, clamps, grips or the specimen itself into the parallel T-slots wherever it needs to sit. Labs use them for large and irregular specimens, furniture screw-holding tests, battery and component testing and one-off fixture setups, in both tension and compression.

 

How they mount

Each platen attaches to the testing machine through four threaded holes or a clevis adapter. Clevis options are female Ø 15.9 mm (5/8 in), 20, 30, 31.8 mm (1-1/4 in), 32, 36 or 40 mm, or male Ø 31.7 mm. Because the platen is a mounting base, its maximum load depends on the coupling, the platen material and how the load is applied: a force taken centrally over the coupling is very different from one taken at the edge of a 400 mm plate. Tell us how you will load it and we will confirm the rating.

 

Sizes and materials

Three standard sizes are available in either material:

  • 250 x 250 mm (9.8 x 9.8 in): 4 kg aluminum, 11.7 kg steel

  • 220 x 400 mm (8.7 x 15.7 in): 5.6 kg aluminum, 16.3 kg steel

  • 380 x 400 mm (15.0 x 15.7 in): 10 kg aluminum, 26.3 kg steel

Anodized aluminum keeps weight down and is rated from -70 to +180 °C (-94 to 356 °F). Nickel-plated steel is stiffer and heavier and is rated from -70 to +280 °C (-94 to 536 °F). Each platen is supplied singly.

 

Grips on a platen

A T-groove platen can carry a chuck or vise grip to clamp specimens too large or awkward for a standard grip body. The same approach works on single-column testers, such as our 500 lb motorized tester, with a grip mounted on the platen. For other ways to hold parts in tension, see our tensile grips.

 

Custom versions

For special setups we make T-groove platens with diagonal slots or with cut-outs, for example to clear the column of a single-column tester. Flat-face platens for ordinary compression work are listed under compression platens.

Tell us the platen size, material, machine coupling or thread mounting, and the grips or fixtures you plan to mount, and we will quote the platen.

Product video

At a glance

  • Max. load: Depends on coupling, platen material and load application

  • Test type: Fixture base for tensile and compression tests

  • Platen size: 250 x 250, 220 x 400 or 380 x 400 mm

  • Material: Aluminum, anodized; or steel, nickel-plated

  • Temperature range: -70 to +180 °C (aluminum); -70 to +280 °C (steel)

  • Coupling: Female clevis Ø 15.9 mm (5/8 in), 20, 30, 31.8 mm (1-1/4 in), 32, 36 or 40 mm; male Ø 31.7 mm; or 4 threads

T-Groove Compression Platens Specifications

MAX. LOAD

Depends on coupling, platen material and load application

 

TEST TYPE

Fixture base for tensile and compression tests

 

PLATEN SIZE

250 x 250, 220 x 400 or 380 x 400 mm

 

MATERIAL

Aluminum, anodized; or steel, nickel-plated

 

TEMPERATURE RANGE

-70 to +180 °C (aluminum); -70 to +280 °C (steel)

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in), 20, 30, 31.8 mm (1-1/4 in), 32, 36 or 40 mm; male Ø 31.7 mm; or 4 threads

 

WEIGHT

4 to 10 kg (aluminum), 11.7 to 26.3 kg (steel)

 

SCOPE OF SUPPLY

1 platen

 

DRAWINGS

Dimensional drawings on data sheet; certified drawings and 3D models on request

 

PART REF.

UGC-CP-190

 

Models & Options

  • 250 x 250 mm, aluminum — Anodized, 4 kg (Specify at order)

  • 220 x 400 mm, aluminum — Anodized, 5.6 kg (Specify at order)

  • 380 x 400 mm, aluminum — Anodized, 10 kg (Specify at order)

  • 250 x 250 mm, steel — Nickel-plated, 11.7 kg (Specify at order)

  • 220 x 400 mm, steel — Nickel-plated, 16.3 kg (Specify at order)

  • 380 x 400 mm, steel — Nickel-plated, 26.3 kg (Specify at order)

  • Custom versions — Diagonal slots, cut-outs for single-column testers, other sizes (On request)

What's Included

  • 1 T-groove platen in the size and material ordered

  • Machine mounting by four threaded holes or clevis adapter, specified at order

  • Grips, clamps and fixtures for the slots are ordered separately

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-CP-180 Rectangular Compression Platens

UGC-CP-180 Rectangular Compression Platens

Square and rectangular compression platens in anodized aluminum, hardened steel or perforated aluminum for foam, packagi

UGC-CP-230 Spherically Seated Compression Platens

UGC-CP-230 Spherically Seated Compression Platens

Lockable spherically seated compression platens in hardened steel or anodized aluminum that align to non-parallel specim

UGC-CP-170 Round Compression Platens

UGC-CP-170 Round Compression Platens

Matched pairs of round compression platens in eight diameters from 56 to 344 mm, in anodized aluminum or 58 HRC hardened

UGC-CP-240 Spherically Seated Compression Platen Wide Angle

UGC-CP-240 Spherically Seated Compression Platen Wide Angle

Wide-angle spherically seated compression platens that swivel ±15° to ±20° to follow inclined or uneven specimen faces.

T-Groove Compression Platens FAQ

What is a T-groove platen used for?

It is a flat, slotted mounting base. Fixtures, clamps, grips or the specimen itself are bolted into the T-slots for tensile or compression tests on parts that standard grips cannot hold.

 

How does it attach to my machine?

Through four threaded holes or a clevis adapter: female Ø 15.9 mm up to 40 mm, or male Ø 31.7 mm.

 

What sizes and weights are available?

250 x 250, 220 x 400 and 380 x 400 mm. Aluminum versions weigh 4 to 10 kg; steel versions 11.7 to 26.3 kg.

 

What is the maximum load?

It depends on the coupling, the platen material and where the load is applied. Describe your setup when you request a quote and we will confirm it.

 

Can I use it on a single-column tester?

Yes, with a grip mounted on the platen. Versions with cut-outs for single-column testers are available on request.

 

Is it sold singly or in pairs?

Singly. Each order line covers one platen.

 

Need help configuring a compression platen?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page