Home › Products › Compression Platens › Spherically Seated Compression Platen





Spherically Seated Compression Platen – Wide Angle ±15° to ±20°
Wide-angle spherically seated compression platens that swivel ±15° to ±20° to follow inclined or uneven specimen faces.
Brand: Universal Grip | Model: UGC-CP-240 | ● Configured to order
Large swivel angle of ±15° to ±20°, depending on platen size
Integral spherical seat aligns itself to the specimen on first contact
Anodized aluminum to 10 kN (2,248 lbf); hardened, nickel-plated steel to 20 kN (4,496 lbf)
Diameters 56, 100, 150 and 200 mm, plus a 100 kN self-aligning special
Standard female clevis coupling with Ø 15.9 mm (5/8 in) pin
Lockable Ø 56 mm version for small specimens
Steel version usable from -70 to +280 °C
Downloads and standards
Trusted by Global Companies


























Wide-angle spherically seated platens for inclined specimen faces
The UGC-CP-240 is a compression platen with an integral spherical seat that swivels through a large angle, ±15° to ±20° depending on size. It is meant for specimens whose faces are inclined or uneven by more than a standard spherical seat can absorb: molded parts, packaging, foams and cellular materials, and assembled components. The platen follows the specimen surface on first contact, so the load is applied over the face instead of at a corner.
How it works
The spherical seat is built into the platen, between the contact face and the clevis coupling. As the crosshead closes, the platen rotates until it sits flat on the specimen, then transmits load through the seat. No separate alignment step is needed. The smallest, Ø 56 mm platen can also be locked in position once it has aligned, which helps when testing small parts that need a fixed contact face. Overall size of the Ø 56 mm version is 68 x 75 mm.
Sizes and versions
Ø 56 mm – lockable, ±20°.
Ø 100 mm, anodized aluminum – ±20°, up to 10 kN (2,248 lbf).
Ø 150 mm, anodized aluminum – ±15°, up to 10 kN.
Ø 200 mm, hardened steel – ±15°, up to 20 kN (4,496 lbf), usable from -70 to +280 °C.
Ø 156 mm special, hardened steel – self-aligning, ±20°, up to 100 kN (22,480 lbf).
Aluminum platens are anodized and specified for 0 to +70 °C; steel platens are hardened and nickel-plated. Platen diameters run from 56 to 200 mm (2.2 to 7.9 in).
Choosing between wide-angle and standard seats
If your specimen faces are close to parallel and you want to lock the platen once it has aligned, our lockable spherically seated platens (UGC-CP-230) with a ±1.5° seat are usually the better fit. Choose the wide-angle platen when the faces are noticeably inclined, when parts vary from one to the next, or when you test foams and packaging that compress unevenly. Pair it with a rigid lower platen from our round compression platens (UGC-CP-170).
Testing machine fit
All standard versions use a female clevis with a Ø 15.9 mm (5/8 in) pin; other couplings are on request. The 10 kN aluminum platens suit 10 kN benchtop universal testing machines, and light foam or packaging tests that stay below 1,500 lbf can also be run on Mark-10 F-series motorized testers with an adapter. The 20 kN steel and 100 kN special versions belong on correspondingly larger Galdabini frames.
Tell us the platen diameter, material, swivel angle you need, maximum load and machine coupling, and we'll quote the right platen.
Product video
At a glance
Max. load: 10 kN (aluminum), 20 kN (steel); 100 kN special version
Test type: Compression
Platen diameter: 56, 100, 150 or 200 mm
Swivel angle: ±15° to ±20°, depending on size
Material: Aluminum, anodized; or steel, hardened, nickel-plated
Temperature range: 0 to +70 °C (aluminum); -70 to +280 °C (steel)
Spherically Seated Compression Platen Specifications
MAX. LOAD
10 kN (aluminum), 20 kN (steel); 100 kN special version
TEST TYPE
Compression
PLATEN DIAMETER
56, 100, 150 or 200 mm
SWIVEL ANGLE
±15° to ±20°, depending on size
MATERIAL
Aluminum, anodized; or steel, hardened, nickel-plated
TEMPERATURE RANGE
0 to +70 °C (aluminum); -70 to +280 °C (steel)
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin; others on request
SCOPE OF SUPPLY
1 platen
PART REF.
UGC-CP-240
Models & Options
Ø 56 mm — Lockable, ±20°, overall 68 x 75 mm (Specify at order)
Ø 100 mm, aluminum — ±20°, max. 10 kN (Specify at order)
Ø 150 mm, aluminum — ±15°, max. 10 kN (Specify at order)
Ø 200 mm, steel — ±15°, max. 20 kN, -70 to +280 °C (Specify at order)
Ø 156 mm, steel, special — Self-aligning, ±20°, max. 100 kN (On request)
Other couplings — Connections other than the Ø 15.9 mm clevis (On request)
What's Included
1 wide-angle spherically seated compression platen with female clevis coupling
Platens are supplied singly; a rigid lower platen is ordered separately
Dimensional drawings and 3D models available on request
Supported Test Standards
Standards list
Compatible Grips & Fixtures
UGC-CP-230 Spherically Seated Compression Platens — Lockable ±1.5° seat for near-parallel specimen faces
UGC-CP-170 Round Compression Platens — Rigid lower platen to pair with the wide-angle upper platen
10 kN Benchtop UTM — Galdabini frame for the 10 kN aluminum platens
Foam Testing — Compression tests on foams and cellular materials
Adapters — Couplings for machines without a 5/8 in clevis
“Customer quote”
Related Equipment
UGC-CP-170 Round Compression Platens
Matched pairs of round compression platens in eight diameters from 56 to 344 mm, in anodized aluminum or 58 HRC hardened
UGC-CP-230 Spherically Seated Compression Platens
Lockable spherically seated compression platens in hardened steel or anodized aluminum that align to non-parallel specim
UGC-CP-250 Compression Test Probes
Hardened steel compression probes with radius, ball or flat tips for indentation, puncture and local compression tests.
UGC-CP-190 T-Groove Compression Platens
T-slotted platens in anodized aluminum or nickel-plated steel that give you a flat base for mounting grips, fixtures and
Spherically Seated Compression Platen FAQ
How far does the wide-angle platen swivel?
±15° to ±20°, depending on size: ±20° on the Ø 56 and Ø 100 mm platens and the Ø 156 mm special, ±15° on the Ø 150 and Ø 200 mm platens.
How is it different from the UGC-CP-230?
The UGC-CP-230 has a ±1.5° (or ±10°) seat that is locked with four nuts after alignment. The UGC-CP-240 swivels much further and aligns itself on contact, for inclined or uneven faces.
Can the platen be locked?
The Ø 56 mm version can be locked in position after it aligns. The larger sizes are self-aligning.
What loads can it take?
Anodized aluminum versions up to 10 kN (2,248 lbf), the hardened steel Ø 200 mm version up to 20 kN (4,496 lbf), and the Ø 156 mm special up to 100 kN (22,480 lbf).
What coupling does it use?
A female clevis with a Ø 15.9 mm (5/8 in) pin as standard. Other connections are available on request or through our adapters.
Can I use it at high or low temperature?
The hardened steel version is usable from -70 to +280 °C. Aluminum versions are specified for 0 to +70 °C.




