top of page

Home  ›  Products  ›  Compression Platens  ›  Spherically Seated Compression Platens

UGC-CP-230 lockable spherically seated compression platen in hardened steel by Universal Grip
UGC-CP-230 lockable spherically seated compression platen in hardened steel by Universal Grip
UGC-CP-230 Spherically Seated Compression Platens by Universal Grip, view 2
UGC-CP-230 Spherically Seated Compression Platens by Universal Grip, view 3
UGC-CP-230 Spherically Seated Compression Platens by Universal Grip, view 4

Spherically Seated Compression Platens – Lockable, Ø 56 to 196 mm

Lockable spherically seated compression platens in hardened steel or anodized aluminum that align to non-parallel specimen faces.

Brand: Universal Grip  |  Model: UGC-CP-230  |  ● Configured to order

  • Spherical seat aligns the platen to non-parallel specimen faces

  • Four nuts lock the platen after alignment for the rest of the test

  • Platen diameters 56, 96, 116, 156 and 196 mm; others on request

  • Hardened steel (58 HRC, nickel-plated) or anodized aluminum

  • Seat radius matched to coupling size, R50 to R300, for loads up to 300 kN

  • Wide-angle version with up to ±10° swivel

  • Adapters combine the spherical seat with rigid square platens

Downloads and standards

Trusted by Global Companies

Adjustable, lockable spherically seated compression platens

UGC-CP-230 spherically seated platens are for compression tests where the two specimen faces are not perfectly parallel. Instead of loading one edge first, the platen tilts on its spherical seat to sit flat on the specimen, and is then locked so it stays put for the rest of the test. They are used by labs testing concrete, stone and mortar, metals and rigid plastics, and by packaging labs that need a light upper platen on small loads.

 

How it works

The platen rides on a spherical seat between the platen face and the coupling. When the platen first contacts the specimen, the seat lets it rotate into alignment with the specimen surface; four nuts then fix the platen in that position. The standard swivel range is ±1.5°, enough to take up machining and cutting tolerances on typical specimens. A wide-angle version swivels up to ±10° for specimens with more pronounced misalignment.

 

Sizes, seats and materials

Platens are made in 56, 96, 116, 156 and 196 mm diameter (2.2 to 7.7 in), with other sizes on request. The seat radius is matched to the coupling size, so the platen's load capacity follows the connection:

  • Light aluminum, Ø 56 mm – R50 seat for 8–10 mm adapters, only 60 g, for packaging and lightweight specimens.

  • Steel, Ø 56–196 mm – R100 seat for 12–25 mm adapters, 1.27–3.95 kg.

  • Heavy steel, Ø 56–196 mm – R200 seat for 30–50 mm adapters, 5.3–7.4 kg.

  • Steel, Ø 156 / 196 mm – R300 seat for 50–60 mm adapters, 7 / 9.8 kg.

As a guide, a platen on a Ø 15.9 mm (5/8 in) clevis is rated to about 20 kN (4,496 lbf), while a platen on a 60 mm coupling reaches 300 kN (67,440 lbf). Steel platens are hardened to 58 HRC and nickel-plated, suit all compression tests including concrete, and run from -70 to +280 °C. Anodized aluminum platens are used from -70 to +180 °C.

 

Building a complete setup

A spherically seated platen is normally used as the upper platen, opposite a rigid lower platen from our round compression platens (UGC-CP-170). Adapters with a ±1.5° or ±10° seat let you combine the alignment function with rigid square platens such as our rectangular compression platens (UGC-CP-180). If the specimen faces are inclined well beyond ±10°, the wide-angle spherically seated platen (UGC-CP-240) swivels ±15° to ±20°. Low-load aluminum and 20 kN steel versions fit benchtop universal testing machines; heavy R200 and R300 versions belong on floor-standing or hydraulic Galdabini frames.

Tell us the platen diameter, material, machine coupling, swivel angle and maximum test load, and we'll configure and quote the platen.

Product video

At a glance

  • Max. load: Depends on coupling size (e.g. 20 kN with Ø 15.9 mm clevis; 300 kN with 60 mm coupling)

  • Test type: Compression

  • Platen diameter: 56, 96, 116, 156, 196 mm (others on request)

  • Swivel angle: ±1.5° standard; ±10° wide-angle version

  • Locking: 4 nuts fix the platen after alignment

  • Seat radius: R50 to R300, matched to coupling size

Spherically Seated Compression Platens Specifications

MAX. LOAD

Depends on coupling size (e.g. 20 kN with Ø 15.9 mm clevis; 300 kN with 60 mm coupling)

 

TEST TYPE

Compression

 

PLATEN DIAMETER

56, 96, 116, 156, 196 mm (others on request)

 

SWIVEL ANGLE

±1.5° standard; ±10° wide-angle version

 

LOCKING

4 nuts fix the platen after alignment

 

SEAT RADIUS

R50 to R300, matched to coupling size

 

MATERIAL

Steel 58 HRC, nickel-plated; or aluminum, anodized

 

TEMPERATURE RANGE

-70 to +180 °C (aluminum); -70 to +280 °C (steel)

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in), Ø 20 mm or Ø 31.8 mm (1-1/4 in), up to 60 mm; others on request

 

SCOPE OF SUPPLY

1 platen

 

PART REF.

UGC-CP-230

 

Models & Options

  • Ø 56 mm, aluminum (light) — For 8–10 mm adapters, R50 seat, 60 g (Specify at order)

  • Ø 56–196 mm, steel — For 12–25 mm adapters, R100 seat, 1.27–3.95 kg (Specify at order)

  • Ø 56–196 mm, steel, heavy — For 30–50 mm adapters, R200 seat, 5.3–7.4 kg (Specify at order)

  • Ø 156 / 196 mm, steel — For 50–60 mm adapters, R300 seat, 7 / 9.8 kg (Specify at order)

  • Ø 100–200 mm, wide angle — ±10° swivel, aluminum or steel, 0.9–5.2 kg (Specify at order)

  • Adapter for square platens — ±1.5° or ±10°, female clevis Ø 15.9 or 31.8 mm (Specify at order)

  • Other diameters and couplings — Sizes and connections outside the standard range (On request)

What's Included

  • 1 spherically seated compression platen in the chosen diameter, material and coupling

  • Platens are supplied singly; order a matching lower platen separately

  • Adapters for square platens ordered separately

  • Certified dimensional drawings and 3D models available on request

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-CP-170 Round Compression Platens

UGC-CP-170 Round Compression Platens

Matched pairs of round compression platens in eight diameters from 56 to 344 mm, in anodized aluminum or 58 HRC hardened

UGC-CP-180 Rectangular Compression Platens

UGC-CP-180 Rectangular Compression Platens

Square and rectangular compression platens in anodized aluminum, hardened steel or perforated aluminum for foam, packagi

UGC-CP-240 Spherically Seated Compression Platen Wide Angle

UGC-CP-240 Spherically Seated Compression Platen Wide Angle

Wide-angle spherically seated compression platens that swivel ±15° to ±20° to follow inclined or uneven specimen faces.

UGC-CP-190 T-Groove Compression Platens

UGC-CP-190 T-Groove Compression Platens

T-slotted platens in anodized aluminum or nickel-plated steel that give you a flat base for mounting grips, fixtures and

Spherically Seated Compression Platens FAQ

Why use a spherically seated platen?

It tilts to sit flat on a specimen whose faces are not perfectly parallel, so load is spread over the whole face instead of one edge. Once aligned, four nuts lock it in place.

 

What swivel angle does it have?

±1.5° as standard, and up to ±10° on the wide-angle version. For ±15° to ±20°, see the UGC-CP-240 wide-angle platen.

 

What is the maximum load?

It depends on the coupling and seat size, for example about 20 kN with a Ø 15.9 mm clevis and 300 kN with a 60 mm coupling. Tell us your test load and we'll size the seat.

 

Should I choose steel or aluminum?

Hardened 58 HRC steel suits all compression tests, including concrete, and runs to +280 °C. Anodized aluminum is lighter and suits packaging and lightweight specimens, up to +180 °C.

 

Can I use it with square platens?

Yes. Adapters with a ±1.5° or ±10° seat combine the alignment function with rigid square platens such as our rectangular compression platens.

 

Is a pair supplied?

No, one platen is supplied. Most setups pair it with a rigid lower platen from our round compression platens.

 

Need help configuring a compression platen?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page