Home › Products › Hydraulic Grips › Hydraulic Vise Grip 100 kN





Hydraulic Vise Grip 100 kN – 0–30 mm Jaw Opening
Hydraulic vise grip for 100 kN tensile tests: 170 kN clamping at 350 bar, 220 kN at 450 bar, on hardened 60 x 66 mm jaws with a 0–30 mm opening.
Brand: Universal Grip | Model: UGC-HG-120 | ● Configured to order
Rated for 100 kN (22,480 lbf) maximum tensile load
170 kN clamping at 350 bar; 220 kN (about 49,500 lbf) at 450 bar
Opens 0–30 mm (0–1.18 in), taking thick bar as well as thin sheet and fabric
Hardened 58 HRC jaws, 60 x 66 mm (2.36 x 2.60 in)
Smooth, pyramid, V, wave, diamond-coated and rubber-coated faces
Two-rod version with speed throttle, for symmetric or single jaw motion
Adapter platen mounts other fixtures without removing the grip
Standards: ASTM E8 · ISO 6892-1 · ASTM D3039 · ASTM D5035
Trusted by Global Companies


























Hydraulic vise grip for 100 kN tensile work
The UGC-HG-120 is a general-purpose hydraulic grip for labs whose workload runs from metal sheet, bar and wire to composites, pipe segments and technical textiles. Rated for 100 kN (22,480 lbf) tensile load, it develops 170 kN (about 38,200 lbf) of clamping at 350 bar (5,075 psi), or 220 kN at 450 bar (6,525 psi), so clamping force stays well ahead of the test load. Unlike a hand-tightened screw vise, it clamps every specimen at the same force whoever is loading it.
Jaws
Jaws are 60 x 66 mm (2.36 x 2.60 in), height by width, hardened to 58 HRC, and open 0–30 mm (0–1.18 in). Choose the face for the material:
Smooth for flat specimens that must not be marked
Pyramid, 1.2 x 45° tooth, for metals and composites
V-jaws for rounds 6–30 mm diameter, standard or diamond-coated
Wave for textiles
Diamond-coated for hard or slippery flat specimens
Rubber-coated for sensitive surfaces, 0–28 mm opening
Special radius jaws for pipe segments, in R59, R60 and R62, are available on request.
Versions and accessories
A two-rod version adds a speed throttle and can be set for symmetric or single jaw motion, useful when the specimen must stay centered or when one jaw should act as a fixed reference. An adapter platen lets you mount other fixtures on the grip without dismounting it, so a lab can switch to bend or compression work quickly. An air-hydraulic pump is available to drive the grips. Standard couplings are female clevis for a Ø 31.8 mm (1-1/4 in) or Ø 40 mm (1.57 in) pin. Each grip weighs 24.5 kg (54 lb), with a rated range of 0 to +70 °C.
Typical applications
Metal sheet, bar and wire
Fiber-reinforced composites
Pipe segments
Technical textiles
That mix covers specimens for ASTM E8, ASTM D3039 and textile strip tests such as ASTM D5035.
Machine fit
At 100 kN the grip pairs with the Galdabini 100 kN benchtop universal testing machine or a floor-standing frame. The UGC-HG-060 shares the 60 x 66 mm jaw size with lighter, spring-return pistons, and the UGC-HG-020 matches the 170 kN at 350 bar rating with 100 x 100 mm pyramid jaws.
Name your coupling, jaw faces, specimen range and preferred version, and say whether you need the pump, and we will prepare the quote: request a quote.
Hydraulic Vise Grip 100 kN Specifications
MAX. TENSILE LOAD
100 kN
CLAMPING FORCE
170 kN at 350 bar; 220 kN at 450 bar
JAW OPENING
0–30 mm
JAW FACE SIZE
60 x 66 mm (H x W)
JAW HARDNESS
58 HRC
COUPLING
Female clevis Ø 31.8 mm (1-1/4 in) or Ø 40 mm pin; others on request
BODY MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
0 to +70 °C; other ranges on request
WEIGHT
24.5 kg per grip
OPERATION
Hydraulic
PART REF.
UGC-HG-120
Models & Options
Smooth jaws — 60 x 66 mm, 0–30 mm (Specify at order)
Pyramid jaws — 1.2 x 45°, 60 x 66 mm, 0–30 mm (Specify at order)
V-jaws — Round specimens 6–30 mm Ø, standard or diamond-coated (Specify at order)
Wave jaws — For textiles, 60 x 66 mm, 0–30 mm (Specify at order)
Diamond-coated jaws — 60 x 66 mm, 0–30 mm (Specify at order)
Rubber-coated jaws — 60 x 66 mm, 0–28 mm (Specify at order)
Radius jaws for pipe segments — R59, R60 or R62 (On request)
Two-rod version — Speed throttle; symmetric or single jaw motion (Specify at order)
Adapter platen — Mount other fixtures without removing the grip (Specify at order)
Air-hydraulic pump — Drives the grips (Specify at order)
What's Included
Hydraulic vise grips, one pair
Jaws not included; choose jaw sets separately (four jaws per set)
Female clevis coupling, Ø 31.8 mm or Ø 40 mm pin
Adapter platen and air-hydraulic pump available as options
Supported Test Standards
ASTM E8 — Tension testing of metallic materials
ISO 6892-1 — Tensile testing of metals, method at room temperature
ASTM D3039 — Polymer matrix composite tensile properties
ASTM D5035 — Breaking force and elongation of textile fabrics, strip method
Compatible Grips & Fixtures
100 kN Benchtop UTM — Galdabini frame matched to the 100 kN rating
Floor-Standing UTMs — Larger frames for mixed metals and composites work
UGC-HG-060 Hydraulic Grip 60–180 kN — Same 60 x 66 mm jaw size, spring-return pistons
Bend Testing Fixtures — Mount via the adapter platen
Adapters — Bridges from the 31.8 or 40 mm clevis to your frame
“Customer quote”
Related Equipment
UGC-HG-020 Hydraulic Grip 170 kN Clamping
Single-cylinder hydraulic grip: an 80 mm piston drives one jaw against an adjustable counter jaw for 170 kN of clamping
UGC-HG-060 Hydraulic Grip 60-180 kN Clamping
Spring-return hydraulic grips built on Ø 50 mm pistons: 60 kN clamping at 315 bar with one piston, 180 kN with three, in
UGC-HG-110 Hydraulic Wedge Grip with Centering Device 250 kN
Hydraulic wedge grip with built-in specimen centering: Ø 160 mm pistons give 600 kN clamping at only 100 bar for a 250 k
UGC-HG-100 Large Hydraulic Grip 1200 kN
Enclosed, opposed-cylinder hydraulic grip that applies 1200 kN of clamping load to heavy plate, large-diameter bar, chai
Hydraulic Vise Grip 100 kN FAQ
What clamping force does the UGC-HG-120 develop?
170 kN at 350 bar (5,075 psi), or 220 kN at 450 bar (6,525 psi), for a maximum tensile load of 100 kN.
Which jaw face should I choose?
Pyramid jaws for most metals and composites, wave jaws for textiles, rubber-coated jaws for sensitive surfaces, and V-jaws for rounds 6–30 mm diameter.
Can it test pipe segments?
Yes. Special radius jaws in R59, R60 and R62 are available on request.
What is the adapter platen for?
It lets you mount other fixtures, such as bend testing fixtures, without dismounting the grip.
Are jaws included with the grips?
No. The grips and jaw sets are ordered separately.
Which machines suit it?
The Galdabini 100 kN benchtop UTM or a floor-standing frame. Couplings are female clevis for Ø 31.8 mm or Ø 40 mm pins.




