Home › Products › Hydraulic Grips › Hydraulic Grip 60-180 kN Clamping





Hydraulic Grip 60-180 kN Clamping – Spring-Return Pistons
Spring-return hydraulic grips built on Ø 50 mm pistons: 60 kN clamping at 315 bar with one piston, 180 kN with three, in single-side or symmetric versions.
Brand: Universal Grip | Model: UGC-HG-060 | ● Configured to order
60 kN (about 13,500 lbf) clamping at 315 bar, or 85 kN at 450 bar, with one piston
180 kN (about 40,500 lbf) version with three Ø 50 mm pistons
Symmetric versions with opposed pistons and lockable throttles
Spring return opens the jaws; 15 mm (0.59 in) stroke per piston
Hardened 58 HRC jaws: 60 x 66, 70 x 120 or 70 x 210 mm
Static and lighter dynamic versions; special seals widen the temperature range
Air-hydraulic pumps with remote open/close control
Standards: ASTM D4595 · ASTM D4632 · ASTM D3039
Trusted by Global Companies


























Modular hydraulic grips from 60 to 180 kN clamping
The UGC-HG-060 family covers a broad spread of tensile work from one building block: a Ø 50 mm (1.97 in) hydraulic piston with spring return. One piston gives 60 kN (about 13,500 lbf) of clamping at 315 bar (4,568 psi), or 85 kN at 450 bar; three pistons side by side give 180 kN (about 40,500 lbf). Labs testing high-strength steel and alloys, fiber composites, geotextiles and plastic strapping can run the same jaws, pumps and hoses across the versions they need.
Single-side or symmetric
In the single-side versions the pistons push one jaw against a fixed jaw. The symmetric versions put opposed pistons on both sides, two for 60 kN and six for 180 kN, so both jaws close toward the center line. Lockable throttles balance the two sides and keep the specimen on the load axis while it is clamped. The 60 kN symmetric grip opens 0–30 mm (0–1.18 in), depending on the jaws fitted. Each piston has a 15 mm (0.59 in) maximum stroke and springs back to open the jaws when pressure is released. A lighter-built 60 kN version is offered for dynamic tests.
Jaws
All jaws are hardened to 58 HRC and come in three sizes. The 60 x 66 mm jaws are available with smooth, pyramid, V (for round specimens), wave, rubber and diamond faces. The 70 x 120 mm and 70 x 210 mm jaws give more clamping area for wide strip, strapping and geotextile specimens, including wave jaws 210 mm wide for wide-width geotextile tests. Grips are supplied without jaws, so each jaw set is chosen separately.
Pumps and temperature
Air-hydraulic pumps open and close the grips by remote switch. Higher-specification pumps set clamping pressure from an analog signal between 40 and 450 bar, so clamping force can be adjusted from the test setup instead of by hand. Standard seals cover 0 to +70 °C (32 to 158 °F); special seals extend the range to -30 to +100 °C or -10 to +200 °C for work inside an environmental chamber.
Typical applications
High-strength steel and alloys
Fiber-reinforced composites
Geotextiles, wide-width and grab tests
Plastic strapping and cords
Geotextile work includes ASTM D4595 wide-width and ASTM D4632 grab specimens.
Machine fit
Couplings are female clevis for a Ø 31.8 mm (1-1/4 in) or Ø 60 mm pin, with others on request. A 60 kN grip weighs about 15 kg (33 lb), or 16.1 kg (35.5 lb) in the double-actuator version, which suits Galdabini floor-standing UTMs and environmental chamber setups. The UGC-HG-120 uses the same 60 x 66 mm jaw size but clamps at 170 kN.
Choose the clamping force, single or symmetric layout, jaw size and face, temperature range and pump, and we will build the set: request a quote.
Product video
At a glance
Clamping force: 60 kN at 315 bar (85 kN at 450 bar); 180 kN at 315 bar
Test type: Tension, static and dynamic versions
Pistons: Ø 50 mm, spring return, max. stroke 15 mm
Jaw opening: 0–30 mm (symmetric), depending on jaws
Jaw face size: 60 x 66, 70 x 120 or 70 x 210 mm
Jaw hardness: 58 HRC
Hydraulic Grip 60-180 kN Clamping Specifications
CLAMPING FORCE
60 kN at 315 bar (85 kN at 450 bar); 180 kN at 315 bar
TEST TYPE
Tension, static and dynamic versions
PISTONS
Ø 50 mm, spring return, max. stroke 15 mm
JAW OPENING
0–30 mm (symmetric), depending on jaws
JAW FACE SIZE
60 x 66, 70 x 120 or 70 x 210 mm
JAW HARDNESS
58 HRC
COUPLING
Female clevis Ø 31.8 mm (1-1/4 in) or Ø 60 mm pin; others on request
BODY MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
0 to +70 °C; -30 to +100 °C or -10 to +200 °C with special seals
WEIGHT (60 KN)
Approx. 15 kg single or 16.1 kg double actuator, per grip
PART REF.
UGC-HG-060
Models & Options
60 kN, single piston — One Ø 50 mm piston, spring return, 15 mm stroke (Specify at order)
60 kN, symmetric — Two opposed pistons, 0–30 mm gap, lockable throttles (Specify at order)
180 kN, single side — Three Ø 50 mm pistons, spring return (Specify at order)
180 kN, symmetric — Six opposed Ø 50 mm pistons, spring return (Specify at order)
Dynamic version — 60 kN, lighter construction for dynamic tests (Specify at order)
Jaws 60 x 66 mm — Smooth, pyramid, V, wave, rubber or diamond faces (Specify at order)
Jaws 70 x 120 / 70 x 210 mm — Smooth, pyramid, V, wave and rubber-coated wave faces for wider specimens (Specify at order)
Air-hydraulic pump — Remote open/close; versions with pressure set by analog signal, 40–450 bar (Specify at order)
Hydraulic hoses — 3 m or 5 m (Specify at order)
Special seals — -30 to +100 °C or -10 to +200 °C (Specify at order)
What's Included
Hydraulic grips, one pair, in the version ordered
Jaws not included; order jaw sets separately (one set = four jaws)
Air-hydraulic pump and hoses ordered separately
Special seals fitted when a wider temperature range is specified
Supported Test Standards
ASTM D4595 — Wide-width strip tensile test for geotextiles
ASTM D4632 — Grab breaking load and elongation of geotextiles
ASTM D3039 — Tension test for polymer matrix composite laminates
Compatible Grips & Fixtures
Floor-Standing UTMs — Galdabini frames for metals, composites and geotextiles
Environmental Chambers — Use with special seals from -30 to +200 °C
UGC-HG-120 Hydraulic Vise Grip 100 kN — Same 60 x 66 mm jaw size, 170 kN clamping
Textiles — Geotextile and strapping test setups
Adapters — For couplings other than Ø 31.8 or Ø 60 mm pins
“Customer quote”
Related Equipment
UGC-HG-120 Hydraulic Vise Grip 100 kN
Hydraulic vise grip for 100 kN tensile tests: 170 kN clamping at 350 bar, 220 kN at 450 bar, on hardened 60 x 66 mm jaws
UGC-HG-050 Hydraulic Geotextile Grip 250 kN
Wide-jaw hydraulic grip for geotextiles and geogrids: 250 kN tensile rating, 500 kN clamping at 350 bar or 650 kN at 450
UGC-HG-070 Hydraulic Wedge Grips 400-600 kN
Heavy-duty hydraulic wedge grips rated 400 kN or 600 kN for tension, compression and dynamic tests on flat and round met
UGC-HG-040 Single-Piston Hydraulic Geotextile Grip 250 kN
Compact single-piston hydraulic grip for wide-width geotextile and geogrid tests, with 500 kN clamping at 450 bar and qu
Hydraulic Grip 60-180 kN Clamping FAQ
What is the difference between the single and symmetric versions?
Single versions push one jaw against a fixed jaw. Symmetric versions use opposed pistons with lockable throttles so both jaws close toward the center line and the specimen stays on the load axis.
How can I get more clamping force from the 60 kN grip?
Running at 450 bar raises it to 85 kN. For more, the three-piston version gives 180 kN at 315 bar.
Can the grips be used in a temperature chamber?
Yes, with special seals: -30 to +100 °C or -10 to +200 °C. Standard seals cover 0 to +70 °C. See environmental chambers.
Are jaws included?
No. Grips are supplied as a pair without jaws, and each jaw set (four jaws) is ordered separately.
Which jaws suit geotextiles?
The 70 x 210 mm wave jaws suit wide-width specimens such as ASTM D4595. Ask us about jaws for ASTM D4632 grab tests.
Can clamping force be set without adjusting a valve by hand?
Yes. Air-hydraulic pumps with an analog pressure input set clamping pressure between 40 and 450 bar from an external signal.




