Home › Products › Hydraulic Grips › Hydraulic Grip 170 kN Clamping





Hydraulic Grip 170 kN Clamping – 100 x 100 mm Pyramid Jaws
Single-cylinder hydraulic grip: an 80 mm piston drives one jaw against an adjustable counter jaw for 170 kN of clamping on flat metal and composite coupons.
Brand: Universal Grip | Model: UGC-HG-020 | ● Configured to order
170 kN (about 38,200 lbf) clamping force at 350 bar (5,075 psi)
Ø 80 mm (3.15 in) hydraulic piston drives the moving jaw
Large 100 x 100 mm (3.94 x 3.94 in) pyramid-serrated jaws
Knurled adjuster sets the counter jaw to the specimen thickness
Clevis block with cross pin; other couplings through adapters
Compact steel body with stacked guide plates
Standards: ASTM E8 · ISO 6892-1 · ASTM D3039
Trusted by Global Companies


























Single-cylinder hydraulic grip for flat metal and composite specimens
The UGC-HG-020 gives flat specimens a large, aggressive hold in a compact body. One Ø 80 mm (3.15 in) hydraulic piston pushes the moving jaw against a counter jaw, producing 170 kN (about 38,200 lbf) of clamping force at 350 bar (5,075 psi). It is aimed at labs testing sheet and plate metal, flat bar and strip, fiber composites and welded joint coupons, where a screw-operated vise would need a lot of tightening torque, and a lot of operator effort, to stop slippage.
How it works
In this single-cylinder design only one jaw moves. The counter jaw stays where a knurled adjuster puts it, so before a series of tests the operator sets the counter jaw for the specimen thickness and the piston closes the remaining gap. With the fixed jaw matched to the specimen, the moving jaw needs only a short stroke and each coupon sits in the same place. Operation is single-acting hydraulic. The grip connects to the machine through a clevis block with a cross pin, and other coupling sizes are handled with adapters.
Jaws
The jaws measure 100 x 100 mm (3.94 x 3.94 in) and carry a pyramid (serrated) face. The large contact area spreads clamping force over more of the specimen tab, which helps with laminates that crush or split under concentrated pressure, while the serrations give metal coupons a positive bite. Other jaw faces can be discussed at order. Jaw opening is confirmed at quote stage against your specimen thickness range.
Typical applications
Sheet and plate metal tensile coupons
Flat bar and strip
Fiber-reinforced composite laminates
Welded joint test pieces
Typical work includes specimens for ASTM E8 and ISO 6892-1 on metals and ASTM D3039 on polymer matrix composites.
Machine fit and alternatives
With 170 kN of clamping force, the grip belongs on Galdabini floor-standing universal testing machines or hydraulic UTMs; adapters cover frames that do not take the clevis-pin connection. If you want the same 170 kN at 350 bar rating with a wider choice of interchangeable faces and a stated 0–30 mm opening, compare the UGC-HG-120 hydraulic vise grip, which uses 60 x 66 mm jaws. For lower-force flat specimens, manual vise grips remain a simpler option.
Let us know your specimen thickness range, machine coupling and available hydraulic supply, and we will put the configuration together: request a quote.
Hydraulic Grip 170 kN Clamping Specifications
CLAMPING FORCE
170 kN at 350 bar
TEST TYPE
Tension
PISTON DIAMETER
80 mm
JAW FACE SIZE
100 x 100 mm
JAW SURFACE
Pyramid (serrated)
COUNTER JAW
Adjustable with knurled adjuster
JAW OPENING
On request
COUPLING
Clevis pin coupling; other sizes via adapters
OPERATION
Hydraulic, single-acting
TEMPERATURE RANGE
On request
PART REF.
UGC-HG-020
Models & Options
Pyramid jaws 100 x 100 mm — Serrated faces for flat metal and composite coupons (Specify at order)
Other jaw faces — Alternative surfaces to suit the specimen (On request)
Coupling adapters — For frames that don't take the clevis-pin connection (On request)
What's Included
Hydraulic grip with Ø 80 mm piston and knurled counter-jaw adjuster
100 x 100 mm pyramid (serrated) jaws
Clevis block with cross pin for the machine connection
Hydraulic supply not specified on the data sheet; confirm at quote
Supported Test Standards
ASTM E8 — Tension tests on metal sheet, plate and bar
ISO 6892-1 — Room-temperature tensile test for metals
ASTM D3039 — Tensile properties of polymer matrix composites
Compatible Grips & Fixtures
Floor-Standing UTMs — Galdabini frames suited to 170 kN-class grips
Hydraulic UTMs — Hydraulic frames for metals and composites
UGC-HG-120 Hydraulic Vise Grip 100 kN — Same 170 kN at 350 bar, wider jaw choice
Vise Grips — Manual grips for lower-force flat specimens
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-HG-120 Hydraulic Vise Grip 100 kN
Hydraulic vise grip for 100 kN tensile tests: 170 kN clamping at 350 bar, 220 kN at 450 bar, on hardened 60 x 66 mm jaws
UGC-HG-010 Hydraulic Grip 700 kN Clamping
Double-cylinder hydraulic grip that closes its jaws with 700 kN at 350 bar for high-load tension tests on steel, heavy p
UGC-HG-030 Large Hydraulic Grip for Wood 2000 kN
Four-cylinder hydraulic grip with segmented serrated jaws for tension tests on full-size structural timber, glulam and L
UGC-HG-040 Single-Piston Hydraulic Geotextile Grip 250 kN
Compact single-piston hydraulic grip for wide-width geotextile and geogrid tests, with 500 kN clamping at 450 bar and qu
Hydraulic Grip 170 kN Clamping FAQ
How is the UGC-HG-020 set for different specimen thicknesses?
A knurled adjuster positions the counter jaw. Set it to the specimen thickness and the Ø 80 mm piston closes the moving jaw against it.
How much clamping force does it give?
170 kN (about 38,200 lbf) at 350 bar (5,075 psi).
Is it suitable for composite specimens?
Yes. The 100 x 100 mm pyramid jaws spread clamping force over a large area, which suits laminates for tests such as ASTM D3039.
What jaw opening does it have?
Jaw opening is confirmed at quote. Tell us your thickest and thinnest specimens and we will configure the grip to suit.
How does it connect to the testing machine?
Through a clevis block with a cross pin. Other coupling sizes are handled with adapters.




