top of page

Home  ›  Products  ›  Peel Fixtures  ›  180 Degree Peel Test Panel

UGC-PL-180 bright annealed stainless steel 180 degree peel test panel for ASTM D3330 by Universal Grip
Product photo 1
Product photo 2
Product photo 3
Product photo 4

180 Degree Peel Test Panel – ASTM D3330 Stainless Steel

Bright annealed stainless steel panel, 125 x 50 x 2 mm, for 180° peel adhesion tests on pressure-sensitive tapes to ASTM D3330 Test Method A.

Brand: Universal Grip  |  Model: UGC-PL-180  |  ● Configured to order

  • Made for 180° peel tests to ASTM D3330 Test Method A

  • Bright annealed stainless steel gives a consistent bonding surface

  • Surface roughness held to 50 ± 25 nm

  • 125 x 50 x 2 mm (4.92 x 1.97 x 0.08 in)

  • Order a single panel or a set of five

  • Pairs with a 2 kg hand roller and a peel fixture

Standards: ASTM D3330

Trusted by Global Companies

Stainless steel test panel for 180° tape peel tests

The UGC-PL-180 is a stainless steel test panel for 180° peel adhesion tests on pressure-sensitive tapes to ASTM D3330 Test Method A. Tape manufacturers, label converters and adhesive QC labs use a standard panel like this as the reference bonding surface, so results from different shifts, operators and sites can be compared directly. See our complete ASTM D3330 guide for specimen preparation, procedure and calculations.

 

Why the panel surface matters

Peel adhesion depends heavily on the surface the tape is bonded to: finish, roughness and cleanliness all shift the result. This panel has a bright annealed finish with a controlled surface roughness of 50 ± 25 nm (0.05 ± 0.025 µm), giving the same bonding surface from panel to panel and batch to batch. It measures 125 x 50 x 2 mm (4.92 x 1.97 x 0.08 in).

 

Using the panel

The tape specimen is applied to the panel with a hand roller, then the panel is held in a peel fixture while the free end of the tape is pulled back at 180°. Our 2 kg peel test sample roller (UGC-PL-200) applies specimens with an even, standardized pressure. Clean and condition panels as your test method specifies before each new specimen.

 

Supply options

  • Single panel – one bright annealed stainless steel panel

  • Panel set – five panels, handy when several specimens are prepared and left to dwell at the same time

 

Typical applications

  • Pressure-sensitive tapes

  • Labels and label stock

  • Protective films

  • Adhesive quality control

 

Testing machine fit

Tape peel forces are low, so a Mark-10 F-series motorized tester (100–1,500 lbF) or our Galdabini 2.5 kN universal testing machine is a good match. The panel is used from 0 to +70 °C as standard, with other ranges on request. The hand roller and the peel fixture are ordered separately; if you're not sure which fixture will hold the panel on your machine, we'll confirm it with your quote. Browse our peel fixtures for the options.

Tell us how many panels you need and the fixture and machine you test on, and we'll quote panels, roller and fixture together.

Product video

At a glance

  • Test type: 180° peel, specimen panel

  • Length: 125 mm (4.92 in)

  • Width: 50 mm (1.97 in)

  • Thickness: 2 mm (0.08 in)

  • Material: Stainless steel

  • Finish: Bright annealed

180 Degree Peel Test Panel Specifications

TEST TYPE

180° peel, specimen panel

 

LENGTH

125 mm (4.92 in)

 

WIDTH

50 mm (1.97 in)

 

THICKNESS

2 mm (0.08 in)

 

MATERIAL

Stainless steel

 

FINISH

Bright annealed

 

SURFACE ROUGHNESS

50 ± 25 nm

 

TEMPERATURE RANGE

0 to +70 °C; other ranges on request

 

SCOPE OF SUPPLY

1 panel or set of 5

 

PART REF.

UGC-PL-180

 

Models & Options

  • Single panel — 1 bright annealed stainless steel panel (Specify at order)

  • Panel set — 5 panels (Specify at order)

What's Included

  • 1 stainless steel test panel, or a set of 5, as ordered

  • Hand roller and peel fixture are ordered separately

Supported Test Standards

  • ASTM D3330 — Peel adhesion of pressure-sensitive tape (Test Method A, 180°)

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PL-140 180 Degree Tape Peel Fixture EN 1939

UGC-PL-140 180 Degree Tape Peel Fixture EN 1939

Carrier fixture for 180° peel adhesion tests on self-adhesive tapes to EN 1939, ISO 29862 and FINAT methods, with steel,

UGC-PL-200 Peel Test Sample Roller

UGC-PL-200 Peel Test Sample Roller

2 kg polyurethane-coated hand roller that applies tape specimens to peel test panels with even pressure, in ASTM, EN/ISO

UGC-PL-160 90 Degree Rubber Adhesion Peel Fixture ISO 813

UGC-PL-160 90 Degree Rubber Adhesion Peel Fixture ISO 813

Articulated 90° peel fixture for rubber-to-rigid substrate adhesion tests such as ISO 813 and ASTM D429, rated 5 kN, in

UGC-PL-190 Loop Tack Test Fixture

UGC-PL-190 Loop Tack Test Fixture

Loop tack holder for pressure-sensitive adhesives, used for ASTM D6195, EN 1719 and FINAT FTM 9 tests with glass or stai

180 Degree Peel Test Panel FAQ

What is this panel used for?

It is the bonding surface for 180° peel adhesion tests on pressure-sensitive tapes to ASTM D3330 Test Method A. The tape is rolled onto the panel and peeled back at 180°.

 

What surface finish does it have?

Bright annealed stainless steel with a surface roughness of 50 ± 25 nm (0.05 ± 0.025 µm), so the bonding surface is consistent from panel to panel.

 

What size is the panel?

125 x 50 x 2 mm (4.92 x 1.97 x 0.08 in), length x width x thickness.

 

Can I buy panels in sets?

Yes. Panels are supplied singly or as a set of 5, useful when several specimens are prepared and dwell at the same time.

 

What else do I need?

A hand roller to apply the tape, such as our 2 kg peel test sample roller, and a peel fixture on your testing machine. Both are ordered separately.

 

Where can I find the ASTM D3330 procedure?

See our ASTM D3330 guide for specimen preparation, procedure and calculations.

 

Need help configuring a peel fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page