top of page

Home  ›  Products  ›  Peel Fixtures  ›  Loop Tack Test Fixture

UGC-PL-190 loop tack test fixture with carrier plate for pressure-sensitive adhesive tests by Universal Grip
UGC-PL-190 loop tack test fixture with carrier plate for pressure-sensitive adhesive tests by Universal Grip
UGC-PL-190 Loop Tack Test Fixture by Universal Grip, view 2
UGC-PL-190 Loop Tack Test Fixture by Universal Grip, view 3
UGC-PL-190 Loop Tack Test Fixture by Universal Grip, view 4

Loop Tack Test Fixture – Glass or Stainless Carrier Plates

Loop tack holder for pressure-sensitive adhesives, used for ASTM D6195, EN 1719 and FINAT FTM 9 tests with glass or stainless steel carrier plates.

Brand: Universal Grip  |  Model: UGC-PL-190  |  ● Configured to order

  • Holds the carrier plate for loop tack tests such as ASTM D6195, EN 1719 and FINAT FTM 9

  • Glass or stainless steel carrier plates, 25 x 70 x 3 mm, in sets of 5

  • Clevis or sword adapter versions to suit the testing machine

  • Rated for 500 N (112 lbf), matched to low-force tack work

  • Light holder: 0.36 kg with clevis, 0.25 kg with sword adapter

  • Used from 0 to +70 °C; other ranges on request

Standards: ASTM D6195  ·  EN 1719  ·  FINAT FTM 9

Trusted by Global Companies

Loop tack fixture for pressure-sensitive adhesives

The UGC-PL-190 is a holder for loop tack testing of pressure-sensitive adhesives, used for tests such as ASTM D6195, EN 1719 and FINAT FTM 9. Loop tack shows how readily an adhesive grabs a surface on light contact, so label, tape and medical adhesive producers use it to check initial tack on incoming and finished material.

 

How it works

A strip of tape is formed into a loop with the adhesive facing out, and its ends are clamped in an upper grip. The crosshead lowers the loop onto a carrier plate held in the fixture, then withdraws it, and the testing machine records the force needed to separate the loop from the plate. Because the holder locates the plate under the loop's path, each test starts from the same position.

 

Carrier plates and adapters

  • Glass carrier plates – set of 5, for EN 1719 and FINAT FTM 9

  • Stainless steel carrier plates – set of 5, for ASTM D6195 and EN 1719

  • Holder with clevis adapter – female clevis with Ø 15.9 mm (5/8 in) or Ø 20 mm pin, 0.36 kg

  • Holder with sword adapter – for sword-type machine connections, 0.25 kg

All carrier plates measure 25 x 70 x 3 mm (about 0.98 x 2.76 x 0.12 in). Plates and the upper grip are ordered separately from the holder, so you can buy the plate material your standard calls for.

 

Ratings

The holder is rated for 500 N (112 lbf), which leaves ample margin for loop tack forces. It works from 0 to +70 °C as standard, with other ranges on request. Its low weight keeps the tare load on a small load cell to a minimum.

 

Typical applications

  • Pressure-sensitive adhesives

  • Labels and label stock

  • Adhesive tapes

  • Medical adhesives

 

Choosing a testing machine

Loop tack is a low-force test, so the fixture is well matched to our 100 lbF motorized tester or another Mark-10 F-series tester, and to our Galdabini 2.5 kN universal testing machine when it shares a frame with other adhesive tests. For the tape loop, a small pinch grip is one upper grip option, and adapters cover other machine connections.

Tell us which standard you follow, the plate material you need and your machine connection, and we'll configure the holder, plates and upper grip — request a quote.

Product video

At a glance

  • Max. load: 500 N (112 lbf)

  • Test type: Loop tack

  • Carrier plate: 25 x 70 x 3 mm (W x L x T)

  • Plate material: Glass (EN 1719, FINAT FTM 9) or stainless steel (ASTM D6195, EN 1719)

  • Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin, or sword adapter

  • Temperature range: 0 to +70 °C; other ranges on request

Loop Tack Test Fixture Specifications

MAX. LOAD

500 N (112 lbf)

 

TEST TYPE

Loop tack

 

CARRIER PLATE

25 x 70 x 3 mm (W x L x T)

 

PLATE MATERIAL

Glass (EN 1719, FINAT FTM 9) or stainless steel (ASTM D6195, EN 1719)

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin, or sword adapter

 

TEMPERATURE RANGE

0 to +70 °C; other ranges on request

 

WEIGHT

0.36 kg (clevis) or 0.25 kg (sword adapter), without plate

 

SCOPE OF SUPPLY

1 fixture; carrier plates and upper grip ordered separately

 

PART REF.

UGC-PL-190

 

Models & Options

  • Holder, clevis adapter — Female clevis with Ø 15.9 or Ø 20 mm pin, 0.36 kg (Specify at order)

  • Holder, sword adapter — For sword-type machine connection, 0.25 kg (Specify at order)

  • Glass carrier plates — Set of 5, 25 x 70 x 3 mm, for EN 1719 and FINAT FTM 9 (Specify at order)

  • Stainless carrier plates — Set of 5, 25 x 70 x 3 mm, for ASTM D6195 and EN 1719 (Specify at order)

What's Included

  • 1 loop tack holder with clevis or sword adapter, as ordered

  • Carrier plates ordered separately in sets of 5

  • Upper grip for the tape loop ordered separately

Supported Test Standards

  • ASTM D6195 — Loop tack of pressure-sensitive adhesives

  • EN 1719 — Pressure-sensitive adhesives – determination of loop tack

  • FINAT FTM 9 — Loop tack measurement for self-adhesive materials

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PL-180 180 Degree Peel Test Panel

UGC-PL-180 180 Degree Peel Test Panel

Bright annealed stainless steel panel, 125 x 50 x 2 mm, for 180° peel adhesion tests on pressure-sensitive tapes to ASTM

UGC-PL-200 Peel Test Sample Roller

UGC-PL-200 Peel Test Sample Roller

2 kg polyurethane-coated hand roller that applies tape specimens to peel test panels with even pressure, in ASTM, EN/ISO

UGC-PL-160 90 Degree Rubber Adhesion Peel Fixture ISO 813

UGC-PL-160 90 Degree Rubber Adhesion Peel Fixture ISO 813

Articulated 90° peel fixture for rubber-to-rigid substrate adhesion tests such as ISO 813 and ASTM D429, rated 5 kN, in

UGC-PL-150 90 Degree Adhesive Peel Fixture ISO 8510-1

UGC-PL-150 90 Degree Adhesive Peel Fixture ISO 8510-1

Wire-driven sliding-table fixture that keeps the peel point centered at a constant 90° for flexible-to-rigid adhesive bo

Loop Tack Test Fixture FAQ

What does a loop tack test measure?

The force needed to pull a loop of adhesive tape away from a plate after brief, light contact. It indicates how readily the adhesive grabs a surface.

 

Glass or stainless steel plates?

Use glass plates for EN 1719 and FINAT FTM 9, and stainless steel plates for ASTM D6195 and EN 1719. Both measure 25 x 70 x 3 mm and come in sets of 5.

 

What is the difference between the clevis and sword adapter versions?

Only the machine connection. The clevis version uses a female clevis with Ø 15.9 mm (5/8 in) or Ø 20 mm pin; the sword adapter version suits sword-type machine connections.

 

Are carrier plates and the upper grip included?

No. The holder is supplied on its own; carrier plates and the upper grip for the tape loop are ordered separately.

 

Which testing machine should I use?

Loop tack forces are low, so a Mark-10 100 lbF tester or our 2.5 kN universal testing machine works well. The fixture is rated for 500 N (112 lbf).

 

Need help configuring a peel fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page