top of page

Home  ›  Products  ›  Peel Fixtures  ›  Peel Test Sample Roller

UGC-PL-200 2 kg polyurethane coated peel test sample roller for applying tape specimens by Universal Grip
UGC-PL-200 2 kg polyurethane coated peel test sample roller for applying tape specimens by Universal Grip
UGC-PL-200 Peel Test Sample Roller by Universal Grip, view 2
UGC-PL-200 Peel Test Sample Roller by Universal Grip, view 3
UGC-PL-200 Peel Test Sample Roller by Universal Grip, view 4

Peel Test Sample Roller – 2 kg Polyurethane Hand Roller

2 kg polyurethane-coated hand roller that applies tape specimens to peel test panels with even pressure, in ASTM, EN/ISO, FINAT and FED-STD versions.

Brand: Universal Grip  |  Model: UGC-PL-200  |  ● Configured to order

  • Defined roller mass of about 2 kg (4.4 lb) for repeatable specimen application

  • Wear-resistant polyurethane coating, 80 ± 5 Shore A

  • Nickel-plated steel core under the coating

  • Ergonomic handle in stainless steel and plastic

  • Versions for ASTM/EN/ISO tape methods, FINAT 06/2011 and FED-STD-141D

  • Prepares specimens for 90° and 180° peel fixtures

Standards: ASTM D3330  ·  ISO 29862  ·  EN 1939  ·  PSTC-101

Trusted by Global Companies

2 kg hand roller for preparing peel test specimens

The UGC-PL-200 is a hand roller for applying adhesive tape specimens to peel test panels with an even, standardized pressure. Common tape peel methods call for a roller of defined mass to be passed over the specimen before testing, and uneven rolldown is an easy way to add scatter to peel results. This roller gives tape, label and protective film labs a controlled mass of about 2 kg (4.4 lb) for every specimen.

 

Construction

The roller core is nickel-plated steel covered with a wear-resistant polyurethane coating of 80 ± 5 Shore A, so the contact surface stays consistent through heavy daily use. An ergonomic handle in stainless steel and plastic lets the operator guide the roller across the specimen while the roller's own mass provides the pressure.

 

Versions by standard

  • Standard roller – 2040 ± 45 g (4.50 lb), for ASTM, EN/ISO, PSTC and JIS tape peel methods

  • FINAT roller – 2000 ± 50 g (4.41 lb), for FINAT 06/2011

  • FED-STD roller – approx. 2040 g, for FED-STD-141D

Specify your test standard when ordering so the correct version and mass are supplied. Roller width is confirmed on request.

 

Where it fits in the test

The roller prepares specimens for both 90° and 180° peel fixtures: lay the tape on the panel, make the number of passes at the speed your method specifies, then mount the panel in the fixture. Use it with our 180° peel test panel (UGC-PL-180) for ASTM D3330, the 180° tape peel fixture (UGC-PL-140) for EN 1939 and ISO 29862 work, or the sliding-table 90° peel fixture (UGC-PL-150). For the methods themselves, see our ASTM D3330 and ISO 29862 guides.

 

Typical applications

  • Adhesive tapes

  • Labels and label stock

  • Protective films

  • Peel test specimen preparation

 

Practical details

The roller is used from 0 to +70 °C as standard, with other ranges on request, and is supplied singly. If you run several test stations or standards, order one roller per station in the version its method calls for. More specimen preparation tools are on our accessories page.

Tell us the standards you test to and how many stations need a roller, and we'll quote the right versions alongside your peel fixtures.

Product video

At a glance

  • Function: Specimen application to peel test panels

  • Roller mass, standard: 2040 ± 45 g (4.50 lb)

  • Roller mass, FINAT: 2000 ± 50 g (4.41 lb)

  • Roller mass, FED-STD-141D: Approx. 2040 g

  • Roller material: Steel, nickel-plated, polyurethane-coated

  • Coating hardness: 80 ± 5 Shore A

Peel Test Sample Roller Specifications

FUNCTION

Specimen application to peel test panels

 

ROLLER MASS, STANDARD

2040 ± 45 g (4.50 lb)

 

ROLLER MASS, FINAT

2000 ± 50 g (4.41 lb)

 

ROLLER MASS, FED-STD-141D

Approx. 2040 g

 

ROLLER MATERIAL

Steel, nickel-plated, polyurethane-coated

 

COATING HARDNESS

80 ± 5 Shore A

 

ROLLER WIDTH

On request

 

HANDLE

Stainless steel and plastic

 

TEMPERATURE RANGE

0 to +70 °C; other ranges on request

 

SCOPE OF SUPPLY

1 roller

 

PART REF.

UGC-PL-200

 

Models & Options

  • Standard roller — 2040 ± 45 g, for ASTM, EN/ISO, PSTC and JIS tape peel methods (Specify at order)

  • FINAT roller — 2000 ± 50 g, for FINAT 06/2011 (Specify at order)

  • FED-STD roller — Approx. 2040 g, for FED-STD-141D (Specify at order)

What's Included

  • 1 polyurethane-coated hand roller in the version specified

  • Test panels and peel fixture are ordered separately

Supported Test Standards

  • ASTM D3330 — Peel adhesion of pressure-sensitive tape

  • ISO 29862 — Self-adhesive tapes – determination of peel adhesion properties

  • EN 1939 — European method for peel adhesion of self-adhesive tapes

  • PSTC-101 — Peel adhesion of pressure-sensitive tape

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-PL-140 180 Degree Tape Peel Fixture EN 1939

UGC-PL-140 180 Degree Tape Peel Fixture EN 1939

Carrier fixture for 180° peel adhesion tests on self-adhesive tapes to EN 1939, ISO 29862 and FINAT methods, with steel,

UGC-PL-150 90 Degree Adhesive Peel Fixture ISO 8510-1

UGC-PL-150 90 Degree Adhesive Peel Fixture ISO 8510-1

Wire-driven sliding-table fixture that keeps the peel point centered at a constant 90° for flexible-to-rigid adhesive bo

UGC-PL-180 180 Degree Peel Test Panel

UGC-PL-180 180 Degree Peel Test Panel

Bright annealed stainless steel panel, 125 x 50 x 2 mm, for 180° peel adhesion tests on pressure-sensitive tapes to ASTM

UGC-PL-190 Loop Tack Test Fixture

UGC-PL-190 Loop Tack Test Fixture

Loop tack holder for pressure-sensitive adhesives, used for ASTM D6195, EN 1719 and FINAT FTM 9 tests with glass or stai

Peel Test Sample Roller FAQ

Why does the roller mass matter?

Tape peel methods specify the rolling pressure used to apply the specimen. A defined mass of about 2 kg (4.4 lb) gives the same application pressure on every specimen.

 

Which version should I order?

Order the standard roller (2040 ± 45 g) for ASTM, EN/ISO, PSTC and JIS tape methods, the FINAT roller (2000 ± 50 g) for FINAT 06/2011, or the FED-STD roller for FED-STD-141D.

 

What is the roller coated with?

A wear-resistant polyurethane coating of 80 ± 5 Shore A over a nickel-plated steel core.

 

Which fixtures is it used with?

Any 90° or 180° tape peel setup, for example our 180° peel test panel and 180° tape peel fixture.

 

How wide is the roller?

Roller width is confirmed on request. Tell us your specimen width and test standard and we'll confirm the version when you request a quote.

 

Where can I learn more about the test methods?

See our ASTM D3330 guide and ISO 29862 guide for specimen preparation and procedure.

 

Need help configuring a peel fixture?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page