Home › Products › Peel Fixtures › 90 Degree Adhesive Peel Fixture ISO 8510-1





90 Degree Adhesive Peel Fixture ISO 8510-1 – Sliding Table
Wire-driven sliding-table fixture that keeps the peel point centered at a constant 90° for flexible-to-rigid adhesive bonds, rated 5 kN.
Brand: Universal Grip | Model: UGC-PL-150 | ● Configured to order
Wire-linked sliding table keeps a constant 90° peel angle through the test
Peel point stays centered under the load axis
Fixed 90° or adjustable-angle versions in standard and 130 mm widths
Specimens up to 50 x 280 mm, or 100 x 280 mm on the wide fixture
Rated for 5 kN (1,124 lbf); nickel-plated steel body
Supplied with mounting bar, wire and wire end tubes
Standards: ISO 8510-1 · ASTM D6862 · ISO 29862 · ASTM D3330
Trusted by Global Companies


























Sliding-table 90° peel fixture for flexible-to-rigid adhesive bonds
The UGC-PL-150 measures the peel strength of a flexible adherend bonded to a rigid substrate at a controlled 90° angle. It is used for tests such as ISO 8510-1 and ASTM D6862, and the same hardware is listed for tape peel methods including ISO 29862 and ASTM D3330. Adhesive formulators, tape producers and labs testing coatings on metal or thermoplastic elastomer bonds choose it when a constant angle and a centered peel point matter. See our complete ISO 8510-1 guide for specimen preparation, procedure and calculations.
How it works
The rigid substrate is mounted on a sliding table. A wire links the table to the crosshead, so as the crosshead lifts the flexible layer the table travels with it. The peel point therefore stays centered under the load axis and the angle stays constant from start to finish, instead of drifting as the bond line is used up. Each fixture comes with its mounting bar, wire and wire end tubes.
Versions
90°, standard width – specimens up to 50 x 280 mm, 5.4 kg
Adjustable angle, standard width – adjustable peel angle 60°, 7.6 kg
90°, 130 mm wide – specimens up to 100 x 280 mm, 7.1 kg
Adjustable angle, 130 mm wide – ±30° peel angle, 9.2 kg
The 130 mm figure is the fixture width; it takes specimens up to 100 mm (3.9 in) wide. Stainless steel carrier plates, 2 mm thick, come in sets of 10: 56 x 280 mm plates and 106 x 280 mm plates for the 130 mm fixtures.
Ratings and coupling
All versions are rated for 5 kN (1,124 lbf) and built from nickel-plated steel. The fixture connects through an M6 thread at the top and a female clevis with a Ø 15.9 mm (5/8 in) pin at the bottom; other couplings are available on request. The standard working range is 0 to +70 °C, with other ranges on request.
Typical applications
Structural and flexible adhesives
Adhesive tapes
Coatings on metal substrates
Thermoplastic elastomer bonds
Choosing the right setup
An upper grip for the flexible adherend is required and ordered separately. Our Galdabini 10 kN universal testing machine covers the full 5 kN rating, and a Mark-10 F-series motorized tester suits lower-force tape and film peels. For tape specimens, add our peel test sample roller (UGC-PL-200).
Tell us your specimen width, whether you need a fixed or adjustable angle, and your machine coupling, and we'll configure the fixture, carrier plates and upper grip for your quote.
Product video
At a glance
Max. load: 5 kN (1,124 lbf)
Test type: 90° peel, sliding table
Specimen size: Max. 50 x 280 mm (standard) or 100 x 280 mm (wide)
Peel angle: 90°; adjustable versions 60° or ±30°
Coupling: M6 thread (upper) and female clevis Ø 15.9 mm (5/8 in) pin (lower); others on request
Body material: Steel, nickel-plated
90 Degree Adhesive Peel Fixture ISO 8510-1 Specifications
MAX. LOAD
5 kN (1,124 lbf)
TEST TYPE
90° peel, sliding table
SPECIMEN SIZE
Max. 50 x 280 mm (standard) or 100 x 280 mm (wide)
PEEL ANGLE
90°; adjustable versions 60° or ±30°
COUPLING
M6 thread (upper) and female clevis Ø 15.9 mm (5/8 in) pin (lower); others on request
BODY MATERIAL
Steel, nickel-plated
CARRIER PLATES
Stainless steel, 2 mm thick, 56 x 280 mm or 106 x 280 mm, sets of 10
TEMPERATURE RANGE
0 to +70 °C; other ranges on request
WEIGHT
5.4 kg to 9.2 kg, by version
SCOPE OF SUPPLY
Fixture with mounting bar, wire and wire end tubes; upper grip ordered separately
PART REF.
UGC-PL-150
Models & Options
90°, standard width — Specimens up to 50 mm wide, 5.4 kg (Specify at order)
Adjustable angle, standard width — Adjustable peel angle 60°, 7.6 kg (Specify at order)
90°, 130 mm wide — Specimens up to 100 mm wide, 7.1 kg (Specify at order)
Adjustable angle, 130 mm wide — ±30° peel angle, 9.2 kg (Specify at order)
Carrier plates 56 x 280 mm — Stainless steel, 2 mm thick, set of 10 (Specify at order)
Carrier plates 106 x 280 mm — Stainless steel, 2 mm thick, for 130 mm fixtures, set of 10 (Specify at order)
Other couplings — Alternatives to the M6 / Ø 15.9 mm clevis connections (On request)
What's Included
Sliding-table 90° peel fixture in the width and angle version ordered
Mounting bar, wire and wire end tubes
Carrier plates ordered separately in sets of 10
Upper grip for the flexible adherend ordered separately
Supported Test Standards
ISO 8510-1 — Adhesives – 90° peel test for flexible-to-rigid bonded assemblies
ASTM D6862 — 90 degree peel resistance of adhesives
ISO 29862 — Self-adhesive tapes – determination of peel adhesion properties
ASTM D3330 — Peel adhesion of pressure-sensitive tape
Compatible Grips & Fixtures
10 kN universal testing machine — Galdabini benchtop frame that covers the 5 kN rating
Motorized tensile testers — Mark-10 F-series testers for lower-force peel work
Peel Test Sample Roller (UGC-PL-200) — 2 kg roller for applying tape specimens
Tensile grips — Upper grip options for the flexible adherend
Adapters — Couplings for other machine connections
Adhesives testing — Other peel and bond test fixtures
“Customer quote”
Related Equipment
UGC-PL-200 Peel Test Sample Roller
2 kg polyurethane-coated hand roller that applies tape specimens to peel test panels with even pressure, in ASTM, EN/ISO
UGC-PL-140 180 Degree Tape Peel Fixture EN 1939
Carrier fixture for 180° peel adhesion tests on self-adhesive tapes to EN 1939, ISO 29862 and FINAT methods, with steel,
UGC-PL-160 90 Degree Rubber Adhesion Peel Fixture ISO 813
Articulated 90° peel fixture for rubber-to-rigid substrate adhesion tests such as ISO 813 and ASTM D429, rated 5 kN, in
UGC-PL-130 German Wheel Peel Fixture
Free-rotating wheel fixture that holds a constant 90° peel angle on tapes, films, release coatings and flexible circuits
90 Degree Adhesive Peel Fixture ISO 8510-1 FAQ
How does the sliding table keep the angle at 90°?
A wire links the table to the crosshead, so the table moves by the same distance the flexible layer is lifted. The peel point stays centered under the load axis for the whole test.
Where can I find the ISO 8510-1 test procedure?
See our ISO 8510-1 guide for specimen preparation, procedure and calculations. This page covers the fixture hardware and its versions.
Should I choose the standard or the 130 mm wide fixture?
The standard fixture takes specimens up to 50 x 280 mm. The 130 mm wide fixture takes specimens up to 100 x 280 mm and uses the 106 x 280 mm carrier plates.
What do the adjustable-angle versions offer?
They let you run peels away from 90°: the standard-width version has an adjustable peel angle of 60° and the 130 mm version ±30°. Tell us the angles you need and we'll confirm the right version.
Is an upper grip included?
No. The fixture comes with its mounting bar, wire and wire end tubes; the upper grip for the flexible adherend is ordered separately, for example from our tensile grips.
Which testing machine is a good match?
Our 10 kN universal testing machine covers the full 5 kN (1,124 lbf) rating. The upper coupling is an M6 thread and the lower a female clevis with Ø 15.9 mm pin.




