top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Welded Car Part Shoulder Grip

UGC-SH-120 welded car part shoulder grip with split chuck, split ring holder and T-slot base by Universal Grip
UGC-SH-120 welded car part shoulder grip with split chuck, split ring holder and T-slot base by Universal Grip
UGC-SH-120 Welded Car Part Shoulder Grip by Universal Grip, view 2
UGC-SH-120 Welded Car Part Shoulder Grip by Universal Grip, view 3
UGC-SH-120 Welded Car Part Shoulder Grip by Universal Grip, view 4

Welded Car Part Shoulder Grip – Split Chuck and Base Fixture

Split upper chuck on a universal joint plus a split ring holder on a T-slot base, for pulling welded automotive assemblies apart.

Brand: Universal Grip  |  Model: UGC-SH-120  |  ● Configured to order

  • Split upper chuck with latch closure for fast part loading

  • Split ring holder locates the mating part on the base

  • T-slot base plate positions the lower holder on the machine table

  • Upper grip on a universal joint aligns itself with the weld

  • Hardened, nickel-coated steel for heavy-duty production testing

  • Holders adapted to your part geometry on request

Downloads and standards

Trusted by Global Companies

Tensile testing welded automotive components

When a nut, stud or bracket is welded to a car body or chassis part, the strength that matters is the strength of the joint as built. Cutting standard coupons from it tells only part of the story. The UGC-SH-120 is a special shoulder grip and base fixture for pulling welded automotive parts apart as complete assemblies. It is aimed at automotive suppliers, weld process engineers and Tier-1 quality labs.

 

How it works

The fixture holds the two halves of the welded assembly separately:

  • Upper grip: a split shoulder chuck with latch closure. The chuck halves open to take one part of the assembly and close around its shoulder, so the part is held by bearing rather than by clamping friction.

  • Lower fixture: a split ring holder that locates the mating part, mounted on a T-slot base plate.

As the crosshead rises, the two parts are pulled apart and the weld carries the full load until it fails. The upper grip hangs on a universal joint, so it aligns itself with the part and keeps bending out of the weld, which gives a more realistic and repeatable result than a rigid connection.

The T-slot base plate lets the lower holder be positioned on the machine table and moved for different part layouts. The latches on the upper chuck mean an operator can load and unload parts quickly, which matters when the fixture is used for production sampling.

 

Construction

All load-bearing parts are hardened, nickel-coated steel. The machine connection is a male clevis Ø 35 mm (1.38 in) with a Ø 13 mm (0.51 in) pin hole; other connections are possible with our adapters. The maximum load is confirmed when we quote, based on your part and its expected failure load.

 

Built around your part

Because welded assemblies differ, the split chuck and split ring holder are adapted to the customer's part geometry. A drawing or sample of the welded part lets us size the bores and shoulders correctly.

 

Typical applications

Automotive body and chassis parts, weld nut and stud assemblies, weld process validation and Tier-1 part quality testing. For tests on threaded fasteners themselves, see our bolt grips; for shear tests on spot welds and lap joints, see our shear fixtures.

 

Machine fit

Welded steel assemblies usually need a Galdabini universal testing machine; we match the fixture to your frame and its table layout.

Send a drawing or sample of the welded part, the expected maximum load and your machine coupling, and we will design the holders. Request a quote.

Product video

At a glance

  • Test type: Tensile test of welded car parts

  • Upper grip: Split shoulder chuck with latch closure

  • Lower fixture: Split ring holder on T-slot base plate

  • Max. load: On request

  • Material: Steel, hardened, nickel-coated

  • Coupling: Male clevis, Ø 35 mm with Ø 13 mm pin hole

Welded Car Part Shoulder Grip Specifications

TEST TYPE

Tensile test of welded car parts

 

UPPER GRIP

Split shoulder chuck with latch closure

 

LOWER FIXTURE

Split ring holder on T-slot base plate

 

MAX. LOAD

On request

 

MATERIAL

Steel, hardened, nickel-coated

 

COUPLING

Male clevis, Ø 35 mm with Ø 13 mm pin hole

 

OPERATION

Manual

 

PART REF.

UGC-SH-120

 

Models & Options

  • Welded car part grip set — Split upper chuck on universal joint, split ring holder, T-slot base plate (Specify at order)

  • Holders for your part — Chuck and ring holder bores matched to your welded part (On request)

  • Coupling adapter — For machines with other couplings (On request)

What's Included

  • Split upper shoulder chuck with latch closure on a universal joint

  • Split ring holder for the mating part

  • T-slot base plate

  • Male clevis Ø 35 mm coupling

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-110 Fine Ceramics Tensile Fixture ISO 15490

UGC-SH-110 Fine Ceramics Tensile Fixture ISO 15490

Steel tensile fixtures for monolithic fine ceramics to ASTM C1273 and ISO 15490, with seats for GIRI, Fig. 15 and Karlsr

UGC-SH-130 Shoulder Grips for Small Specimens

UGC-SH-130 Shoulder Grips for Small Specimens

Hardened shoulder grips for small round specimens with button or shoulder heads, in Ø 8.1 mm and Ø 6 mm bores with radiu

UGC-SH-100 Adjustable Double Hook Grip

UGC-SH-100 Adjustable Double Hook Grip

Compact lower grip with two screw-adjusted hook arms for pulling loops, rings and eyelets, connected by an M12 male thre

UGC-SH-140 Carbon and Graphite Tensile Fixture

UGC-SH-140 Carbon and Graphite Tensile Fixture

Carrier and insert set that seats shaped carbon and graphite specimens for tensile stress-strain tests to ASTM C749, in

Welded Car Part Shoulder Grip FAQ

What kind of parts does this grip test?

Welded automotive assemblies such as weld nuts and studs on body and chassis parts. The two halves are pulled apart so the weld carries the load.

 

Why is the upper grip on a universal joint?

The joint lets the grip align itself with the part, which keeps bending out of the weld and gives more repeatable results.

 

Will it fit my part?

The split chuck and ring holder are adapted to the customer's part geometry. Send us a drawing or a sample.

 

How does it connect to the machine?

With a male clevis Ø 35 mm (1.38 in) and a Ø 13 mm (0.51 in) pin hole; an adapter covers frames with other connections.

 

What is the load rating?

It is confirmed at quote, based on your part and its expected failure load.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page