Home › Products › Shoulder and Button Head Grips › Adjustable Double Hook Grip





Adjustable Double Hook Grip – M12 Thread
Compact lower grip with two screw-adjusted hook arms for pulling loops, rings and eyelets, connected by an M12 male thread with lock nut.
Brand: Universal Grip | Model: UGC-SH-100 | ● Configured to order
Two hook arms, each set independently with its own T-handle screw
Window between the arms takes loops, eyelets and rings of different sizes
M12 male threaded adapter with lock nut for setting alignment
Compact body of 50 x 106 x 138 mm (1.97 x 4.17 x 5.43 in)
Nickel-plated steel for corrosion protection
Works as a lower grip with a matching upper grip
Downloads and standards
Trusted by Global Companies


























A compact double hook grip for loops, rings and formed parts
Single hooks work well when the specimen's loop fits the hook. When loop sizes vary from part to part, or a formed part needs to be pulled from two points, an adjustable grip saves making a new hook for every job. The UGC-SH-100 is a compact grip with two hook arms whose positions are set by T-handle adjusting screws. It is aimed at component makers and QC labs that pull test wire forms, straps with eyelets, small hooks and similar parts.
How it works
The grip body has a window between the two hook arms. The specimen is engaged through that window, so a loop, ring or eyelet hangs over the arms. Each arm is set by its own T-handle screw, which lets the operator adjust the arm positions to the size of the part and center it under the load axis. Once set, the crosshead pulls the specimen in tension against the hook arms.
The grip is used as the lower grip, with a matching upper grip holding the other end of the specimen. For a loop at the top end, a hook grip is a natural partner; for a flat tab or strap, a vise grip or pneumatic grip works.
Construction and connection
Body size 50 x 106 x 138 mm (1.97 x 4.17 x 5.43 in)
Two T-handle screws for hook arm position
M12 male threaded adapter with lock nut
Steel, nickel-plated
Manual operation
The M12 thread connects to the machine base or to a matching adapter, and the lock nut lets you set the grip's orientation before tightening. If your machine uses a clevis or a different thread, we supply a suitable connection from our range of adapters. The maximum load is confirmed at quote based on your specimen and expected force.
Typical applications
Pull tests on wire forms and loops, straps and eyelets, small hooks and fasteners, and general component pull testing where parts carry a loop or ring rather than a flat gripping area.
Machine fit
The compact body suits bench-top frames such as Mark-10 F-series motorized tensile testers and Galdabini bench-top universal testing machines. We confirm the thread or clevis connection when we quote.
Tell us the specimen type and size, the expected maximum load and the thread or clevis connection on your machine, and we will configure the grip and a matching upper grip. Request a quote.
Adjustable Double Hook Grip Specifications
TEST TYPE
Tensile test of loops, eyelets and formed parts
SIZE
50 x 106 x 138 mm
ADJUSTMENT
2 T-handle screws for hook arm position
COUPLING
Male thread M12 adapter
MAX. LOAD
On request
MATERIAL
Steel, nickel-plated
OPERATION
Manual
PART REF.
UGC-SH-100
Models & Options
Adjustable double hook grip, M12 — Lower grip with two T-handle adjusted hook arms, M12 male thread with lock nut (Specify at order)
Other thread or clevis connection — Connection to suit your testing machine (On request)
Matching upper grip — Hook, vise or pneumatic grip for the other specimen end (On request)
What's Included
1 adjustable double hook grip (lower grip)
M12 male threaded adapter with lock nut
Upper grip ordered separately to suit your specimen
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Hook grips — Upper hook for looped specimens
Vise grips — Upper grip for flat tabs and straps
Tensile testers — Mark-10 F-series motorized bench-top testers
Benchtop universal testing machines — Galdabini bench-top frames
Adapters — Thread and clevis adapters
“Customer quote”
Related Equipment
UGC-SH-090 Liquid-Applied Membrane Adhesion Fixture EN 14891
Guided fixture that opens a crack beneath liquid-applied waterproofing for tiles to EN 14891 A.8, with a tensile adhesio
UGC-SH-110 Fine Ceramics Tensile Fixture ISO 15490
Steel tensile fixtures for monolithic fine ceramics to ASTM C1273 and ISO 15490, with seats for GIRI, Fig. 15 and Karlsr
UGC-SH-080 Net Holding Fixture 10 kN
Pin-bar fixture pair for tensile tests on nets and open mesh up to 10 kN: meshes hook over a row of pins and a clamping
UGC-SH-120 Welded Car Part Shoulder Grip
Split upper chuck on a universal joint plus a split ring holder on a T-slot base, for pulling welded automotive assembli
Adjustable Double Hook Grip FAQ
How are the hook arms adjusted?
Each of the two hook arms is set by its own T-handle screw, so you can match the arms to the size of the loop, ring or eyelet and center the part.
Is this an upper or lower grip?
It is used as the lower grip, with a matching upper grip on the load cell side.
How does it connect to the machine?
Through an M12 male threaded adapter with lock nut. Other threads or clevis couplings are handled with an adapter.
How big is the grip?
The body measures 50 x 106 x 138 mm (1.97 x 4.17 x 5.43 in).
What is the load rating?
It is confirmed at quote based on your specimen and expected maximum force.




