Home › Products › Shoulder and Button Head Grips › Shoulder Grips for Small Specimens





Shoulder Grips for Small Specimens – Ø 6 and 8.1 mm Bores
Hardened shoulder grips for small round specimens with button or shoulder heads, in Ø 8.1 mm and Ø 6 mm bores with radiused seats.
Brand: Universal Grip | Model: UGC-SH-130 | ● Configured to order
Radiused seats match the shoulder of the specimen head for even bearing
Two bore sizes: Ø 8.1 mm (2 mm radius) and Ø 6 mm (1.5 mm radius)
Threaded collars and thumb screws for quick specimen change
Load introduced through the head, never by clamping the gauge section
Hardened, nickel-plated steel for wear resistance
Also suited to small fine ceramic tensile specimens
Downloads and standards
Trusted by Global Companies


























Shoulder grips for small round tensile specimens
Small round specimens with shouldered or button-head ends are common in materials research, sub-size metal testing and fine ceramics. Wedge jaws are a poor fit for them: they can damage the short gauge section, and their alignment is not good enough for the small cross-sections involved. The UGC-SH-130 shoulder grips hold the specimen by its head instead. They are made for research labs, metallurgy labs and anyone testing miniature or sub-size specimens.
How it works
The specimen shank passes through a bored hole in the grip, and its head seats against a radiused shoulder at the bottom of the bore. The radius matches the fillet under the specimen head, so the contact is spread evenly instead of concentrated on an edge. A threaded collar with thumb screws closes the grip around the head and lets the operator change specimens quickly without tools. Because load is introduced through the head, the gauge section is never clamped or marked.
Bore sizes
Hole Ø 8.1 mm (0.319 in), seat radius 2 mm
Hole Ø 6 mm (0.236 in), seat radius 1.5 mm
The bore has to clear the specimen shank while the head bears on the radius, so pick the size from your specimen drawing. If your shank or head dimensions sit between the two, tell us and we will advise.
Construction and coupling
The grips are hardened, nickel-plated steel for wear resistance at the seat. The machine connection is a male clevis Ø 35 mm (1.38 in); other connections are handled with our adapters. Operation is manual, using the threaded collar and thumb screws. The maximum load is confirmed at quote based on your specimen.
Typical applications
Small metal tensile specimens, miniature and sub-size specimens, materials research, and small fine ceramic specimens. For standard-shaped ceramic specimens, see our fine ceramics tensile fixture. For larger button-head specimens with interchangeable inserts, see the button head grips with split inserts, and for full-size threaded and shouldered metal specimens browse our shoulder grips.
Machine fit
Small specimens are typically tested on Galdabini bench-top universal testing machines. Add an extensometer when you need strain on a short gauge length.
Tell us the specimen shank diameter and head geometry, the expected maximum load and your machine coupling, and we will confirm the bore size. Request a quote.
Shoulder Grips for Small Specimens Specifications
TEST TYPE
Tensile test of shouldered round specimens
SPECIMEN HOLE
Ø 8.1 mm or Ø 6 mm
SEAT RADIUS
2 mm (Ø 8.1 mm hole) or 1.5 mm (Ø 6 mm hole)
MAX. LOAD
On request
MATERIAL
Steel, hardened, nickel-plated
COUPLING
Male clevis, Ø 35 mm
OPERATION
Manual, threaded collar with thumb screws
PART REF.
UGC-SH-130
Models & Options
Hole Ø 8.1 mm — Seat radius 2 mm (Specify at order)
Hole Ø 6 mm — Seat radius 1.5 mm (Specify at order)
Coupling adapter — For machines without a male clevis Ø 35 mm connection (On request)
What's Included
Shoulder grips with the bore size ordered
Threaded collars with thumb screws
Male clevis Ø 35 mm couplings
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Benchtop universal testing machines — Galdabini bench-top frames
Extensometers — Strain on short gauge lengths
Fine ceramics tensile fixture — Standard-shaped ceramic specimens
Button head grips with split inserts — Larger button-head specimens
Shoulder grips — Full range of shoulder and button head grips
“Customer quote”
Related Equipment
UGC-SH-120 Welded Car Part Shoulder Grip
Split upper chuck on a universal joint plus a split ring holder on a T-slot base, for pulling welded automotive assembli
UGC-SH-140 Carbon and Graphite Tensile Fixture
Carrier and insert set that seats shaped carbon and graphite specimens for tensile stress-strain tests to ASTM C749, in
UGC-SH-110 Fine Ceramics Tensile Fixture ISO 15490
Steel tensile fixtures for monolithic fine ceramics to ASTM C1273 and ISO 15490, with seats for GIRI, Fig. 15 and Karlsr
UGC-SH-150 Rubber Adhesion Test Fixture GOST 209
Cylindrical carriers and 25 mm disc inserts, held by a knurled cross pin, for tear-off adhesion tests of rubber-to-metal
Shoulder Grips for Small Specimens FAQ
What specimens do these grips take?
Small round specimens with shouldered or button-head ends. The shank goes through the bore and the head seats on a radiused shoulder.
Which bore size do I need?
Ø 8.1 mm with a 2 mm seat radius, or Ø 6 mm with a 1.5 mm seat radius. Choose from your specimen's shank diameter and head fillet.
How are specimens changed?
A threaded collar with thumb screws closes the grip around the head, so specimens are changed by hand without tools.
Can I test ceramic specimens?
Yes, the grips also suit small fine ceramic tensile specimens. For standard ceramic shapes, see the fine ceramics tensile fixture.
What is the coupling?
A male clevis Ø 35 mm (1.38 in). If your crosshead has a different connection, we supply a matching adapter.




