Home › Products › Shoulder and Button Head Grips › Rubber Adhesion Test Fixture GOST 209





Rubber Adhesion Test Fixture GOST 209 – 25 mm Discs
Cylindrical carriers and 25 mm disc inserts, held by a knurled cross pin, for tear-off adhesion tests of rubber-to-metal and glue bonds to GOST 209.
Brand: Universal Grip | Model: UGC-SH-150 | ● Configured to order
For tear-off bond strength tests to GOST 209, Fig. 2
Disc inserts with a Ø 25 mm (0.98 in) test surface
Inserts drop into carriers and lock with a knurled cross pin
Fast specimen change between tests, no tools required
Nickel-plated steel carriers and inserts for corrosion protection
Supplied with one pair of carriers and inserts
Standards: GOST 209
Trusted by Global Companies


























Tear-off adhesion testing of rubber and glue bonds
Anti-vibration mounts, bushings and many other rubber-to-metal parts rely on the bond between rubber and steel. The tear-off test checks that bond directly by pulling two bonded discs apart. The UGC-SH-150 fixture measures the adhesion strength of rubber to metal and of glue bonds by the tear-off method of GOST 209. It is used by rubber compounders, bonding agent and adhesive developers and makers of rubber-to-metal parts.
How it works
The specimen is bonded between two disc inserts, each with a 25 mm (0.98 in) diameter test surface. After curing, the two inserts drop into cylindrical carriers, one on the upper and one on the lower side of the machine, and are secured with a knurled cross pin. The crosshead then pulls the carriers apart and loads the bond in tension until it fails. The peak force divided by the disc area gives the adhesion strength, and the failure surface shows whether the bond failed in the rubber, at the interface or in the adhesive.
The cross pin is pushed in and pulled out by hand, so a bonded pair can be loaded, tested and replaced in moments. That suits a lab running a series of specimens from one batch of compound or adhesive.
Construction and coupling
Cylindrical carriers and disc inserts, steel, nickel-plated
Test surface Ø 25 mm
Knurled cross pin retention
Female clevis coupling for a 20 mm (0.79 in) pin; others via adapters
The fixture is supplied with one pair of carriers and inserts. Most labs order extra disc inserts so several specimens can be bonded and cured at the same time while the fixture stays on the machine. The maximum load is confirmed at quote.
Typical applications
Rubber-to-metal bonded parts, anti-vibration mounts, adhesive and glue development, and rubber compound quality control. For adhesive bond tests to GOST 14760 and related methods, see the adhesive bond tensile fixture; for coatings, see the coating bond strength fixture.
Machine fit
Bond strength tests on 25 mm discs are normally run on a Galdabini bench-top universal testing machine; we confirm the rating against your expected bond strength. More fixtures for rubber are on our elastomer testing page.
Tell us how many additional disc inserts you need, the expected maximum load and your machine coupling. Request a quote.
Rubber Adhesion Test Fixture GOST 209 Specifications
TEST TYPE
Tensile adhesion (tear-off) of rubber and glue bonds
TEST SURFACE
Ø 25 mm
MAX. LOAD
On request
MATERIAL
Steel, nickel-plated
COUPLING
Female clevis, Ø 20 mm pin; others via adapter
SCOPE OF DELIVERY
1 pair of carriers and inserts
OPERATION
Manual, pin-retained inserts
STANDARDS
GOST 209
PART REF.
UGC-SH-150
Models & Options
GOST 209 adhesion fixture — 1 pair of carriers and disc inserts, Ø 25 mm test surface (Specify at order)
Additional disc inserts — Extra inserts for bonding several specimens at once (Specify at order)
Coupling adapter — For machines without a 20 mm clevis (On request)
What's Included
1 pair of cylindrical carriers with female clevis coupling
1 pair of disc inserts with Ø 25 mm test surface
Knurled cross pins for insert retention
Additional inserts available separately
Supported Test Standards
GOST 209 — Rubber and glue – adhesion strength to metal by tear-off method
Compatible Grips & Fixtures
Benchtop universal testing machines — Galdabini bench-top frames
Adhesive bond tensile fixture — Bond tests to GOST 14760
Elastomer testing — Grips and fixtures for rubber
Adhesives testing — Bond and adhesion fixtures
Adapters — For other machine couplings
“Customer quote”
Related Equipment
UGC-SH-140 Carbon and Graphite Tensile Fixture
Carrier and insert set that seats shaped carbon and graphite specimens for tensile stress-strain tests to ASTM C749, in
UGC-SH-160 Steel Fastener Grip ISO 898-1 1000 kN
Heavy-duty insert holder for tensile tests on full-size bolts, screws and studs up to 1000 kN, mounted in a larger wedge
UGC-SH-130 Shoulder Grips for Small Specimens
Hardened shoulder grips for small round specimens with button or shoulder heads, in Ø 8.1 mm and Ø 6 mm bores with radiu
UGC-SH-180 Plating Embrittlement Shoulder Grip
Shoulder grip with hardened inserts for ASTM F519 type 1a.2 notched round specimens, for sustained-load hydrogen embritt
Rubber Adhesion Test Fixture GOST 209 FAQ
What does this fixture test?
The adhesion strength of rubber to metal and of glue bonds, by the tear-off method of GOST 209.
How big is the bonded area?
Each disc insert has a Ø 25 mm (0.98 in) test surface.
How are the inserts held?
They drop into cylindrical carriers and are locked with a knurled cross pin, so specimens are changed by hand.
Should I order extra inserts?
Usually yes. One pair of carriers and inserts is supplied; extra inserts let you bond and cure several specimens while the fixture stays mounted.
What coupling does it use?
A female clevis for a 20 mm (0.79 in) pin; machines with other couplings take an adapter.




