Home › Products › Shoulder and Button Head Grips › Steel Fastener Grip ISO 898-1 1000 kN





Steel Fastener Grip ISO 898-1 1000 kN – Insert Holder
Heavy-duty insert holder for tensile tests on full-size bolts, screws and studs up to 1000 kN, mounted in a larger wedge grip via an M60 x 3 adapter.
Brand: Universal Grip | Model: UGC-SH-160 | ● Configured to order
Tensile tests on full-size bolts, screws and studs to ISO 898-1
Rated to 1000 kN (about 224,800 lbf) for large, high-strength bolts
Interchangeable inserts matched to the fastener thread size and head
M60 x 3 adapter clamps in an existing large wedge grip, no new coupling needed
Nickel-plated steel for durability and corrosion protection
Standards: ISO 898-1
Trusted by Global Companies


























Full-size tensile testing of large steel fasteners
Testing a finished bolt to failure is the most direct proof of its property class, but large structural bolts need a grip that can carry very high loads through the bolt head. The UGC-SH-160 is a heavy-duty grip for tensile tests on steel bolts, screws and studs to ISO 898-1 (also DIN EN ISO 898-1), rated to 1000 kN (about 224,800 lbf). It is aimed at fastener manufacturers, structural bolt suppliers, incoming inspection departments and accredited test labs.
See our complete ISO 898-1 guide for specimen preparation, procedure and calculations. This page covers the grip hardware.
How it works
The grip is a holder for interchangeable inserts. The fastener passes through an insert sized to its thread, with its head (or a nut on a stud) bearing against the insert face. The threaded end is held at the other side of the machine, typically in a threaded adapter or wedge grip. As the load rises, the full-size fastener is pulled to failure, so the result reflects the real thread, shank and head-to-shank transition rather than a machined coupon.
Mounting in a larger wedge grip
Rather than a dedicated clevis, the holder connects through an adapter with an M60 x 3 thread that is clamped in a larger wedge grip. Labs that already run heavy wedge grips on a large frame can add full-size fastener testing without changing their machine coupling, and switch back to flat or round specimens by removing the adapter.
Inserts
Insert sizes are made on request to suit the fastener thread and head types you test. A typical package covers the thread sizes in your product range, with special inserts added for unusual heads. Changing inserts is a manual operation.
Choosing between our ISO 898-1 fixtures
UGC-SH-160 (this grip): 1000 kN, mounts in an existing large wedge grip, for large and high-strength bolts.
UGC-SH-170: carrier and insert set with its own female clevis coupling, for screws, bolts and nuts.
UGC-SH-330: an alternative holder design for the same full-size fastener test.
Machine fit
At 1000 kN, this grip belongs on a Galdabini hydraulic universal testing machine or a large floor-standing frame with heavy wedge grips. For smaller fasteners and threaded rod, see our bolt grips.
Tell us the fastener thread sizes and head types, the grips on your machine and any special inserts you need, and we will configure the holder. Request a quote.
Hydraulic universal testing machines overview
At a glance
Max. load: 1000 kN
Test type: Tensile test of full-size bolts and screws
Design: Holder for interchangeable inserts
Coupling: Adapter with M60 x 3 thread, for clamping in a larger wedge grip
Material: Steel, nickel-plated
Insert sizes: On request, to suit fastener thread and head
Steel Fastener Grip ISO 898-1 1000 kN Specifications
MAX. LOAD
1000 kN
TEST TYPE
Tensile test of full-size bolts and screws
DESIGN
Holder for interchangeable inserts
COUPLING
Adapter with M60 x 3 thread, for clamping in a larger wedge grip
MATERIAL
Steel, nickel-plated
INSERT SIZES
On request, to suit fastener thread and head
OPERATION
Manual
STANDARDS
ISO 898-1, DIN EN ISO 898-1
PART REF.
UGC-SH-160
Models & Options
Fastener insert holder 1000 kN — Holder with M60 x 3 adapter for clamping in a larger wedge grip (Specify at order)
Inserts by thread size — Inserts matched to your fastener thread and head (On request)
Special inserts — For non-standard heads or fastener types (On request)
What's Included
Insert holder rated 1000 kN
Adapter with M60 x 3 thread for clamping in a larger wedge grip
Inserts specified at order to suit your fasteners
Supported Test Standards
ISO 898-1 — Mechanical properties of carbon and alloy steel bolts, screws and studs
Compatible Grips & Fixtures
ISO 898-1 guide — Specimens, procedure and calculations
Hydraulic universal testing machines — Galdabini frames for 1000 kN fastener tests
Wedge grips — Heavy wedge grips that clamp the M60 x 3 adapter
Bolt grips — Grips for smaller fasteners and threaded rod
“Customer quote”
Related Equipment
UGC-SH-330 Fastener Tensile Test Fixture ISO 898-1
Upper and lower box-type holders with pin-retained, thread-size inserts for tensile tests on full-size screws, bolts and
UGC-SH-150 Rubber Adhesion Test Fixture GOST 209
Cylindrical carriers and 25 mm disc inserts, held by a knurled cross pin, for tear-off adhesion tests of rubber-to-metal
UGC-SH-180 Plating Embrittlement Shoulder Grip
Shoulder grip with hardened inserts for ASTM F519 type 1a.2 notched round specimens, for sustained-load hydrogen embritt
UGC-SH-140 Carbon and Graphite Tensile Fixture
Carrier and insert set that seats shaped carbon and graphite specimens for tensile stress-strain tests to ASTM C749, in
Steel Fastener Grip ISO 898-1 1000 kN FAQ
What standard is this grip used for?
Tensile tests on full-size steel bolts, screws and studs to ISO 898-1. Our ISO 898-1 guide covers specimens, procedure and calculations.
How does it mount on my machine?
Through an adapter with an M60 x 3 thread that is clamped in a larger wedge grip already on your machine.
What is the load rating?
1000 kN (about 224,800 lbf).
Which inserts do I need?
Inserts are made on request to suit your fastener thread sizes and head types. Send us your size range.
How is it different from UGC-SH-170?
This grip is rated 1000 kN and mounts in a wedge grip; the UGC-SH-170 is a carrier and insert set with its own clevis coupling.
What machine do I need?
A hydraulic universal testing machine or large floor-standing frame with heavy wedge grips.




