Home › Products › Shoulder and Button Head Grips › Fastener Tensile Test Fixture ISO 898-1





Fastener Tensile Test Fixture ISO 898-1 – Box-Type Screw Holders
Upper and lower box-type holders with pin-retained, thread-size inserts for tensile tests on full-size screws, bolts and nuts.
Brand: Universal Grip | Model: UGC-SH-330 | ● Configured to order
Full-size fastener tensile test to ISO 898-1, test 9.1
Open window: screws and bolts load from the side
Interchangeable inserts by thread size, retained by a pin
One carrier set covers screws, bolts and nuts
Nickel-plated steel holders
Female clevis Ø 40 mm for direct mounting
Trusted by Global Companies


























Box-type fixture for full-size fastener tensile tests
The UGC-SH-330 tests finished screws and bolts in tension at full size, the way ISO 898-1 test 9.1 describes, rather than machining a reduced specimen from them. Fastener manufacturers, distributors running incoming inspection and accredited test labs use it to verify property class on product as delivered. See our complete ISO 898-1 guide for test selection, fixture requirements and acceptance values.
How it works
The fixture consists of an upper and a lower box-shaped holder, each with an open window in its side. The fastener is passed in through the window: its head bears on an insert sized to the thread in one holder, and the threaded end is held by a nut or a threaded insert in the other. When the machine pulls the holders apart, the fastener is loaded between the underside of the head and the engaged thread, the same load path it sees in service.
Inserts
Inserts are made for each thread size and are held in the holder by a pin, so switching from one fastener size to the next is a matter of pulling the pin and dropping in a new insert. Insert sizes and the load rating of the set are specified at quote, based on the thread range and property classes you test. With the right inserts the same holders also take nuts.
Typical applications
Fastener manufacturing and lot release testing
Bolt and screw quality control
Incoming goods inspection at assembly plants
Independent testing laboratories, including tests such as ASTM F606
For very large fasteners, the 1000 kN steel fastener grip UGC-SH-160 covers higher loads, and our bolt grips category lists other fastener fixtures.
Machine fit
Full-size tensile loads rise quickly with diameter and property class, so this fixture is normally used on a floor-standing or hydraulic universal testing machine. Galdabini frames span 2.5 kN to 2,000 kN. The holders connect with a female clevis and Ø 40 mm pin; other couplings are made with adapters.
Send us the thread sizes, head types and highest property class you test, plus your machine coupling, and we will size the holders and inserts.
Fastener Tensile Test Fixture ISO 898-1 Specifications
TEST TYPE
Tensile test on full-size screws and bolts
SPECIMEN
Screws, bolts and nuts
DESIGN
Upper and lower box holders with inserts
MAX. LOAD
On request
INSERT SIZES
On request, by thread size
MATERIAL
Steel, nickel-plated
COUPLING
Female clevis, Ø 40 mm pin; others via adapter
OPERATION
Manual, pin-retained inserts
STANDARD
ISO 898-1, DIN EN ISO 898-1
PART REF.
UGC-SH-330
Models & Options
Name — Description (Part #)
Box holder set — Upper and lower box holders, female clevis Ø 40 mm (Specify at order)
Head-side inserts — Pin-retained, by thread size (Specify at order)
Thread-side inserts / nuts — Threaded inserts by thread size (Specify at order)
Other couplings — Adapter to your testing machine (On request)
What's Included
Upper and lower box-type holders
Inserts for the thread sizes specified at order
Retaining pins for the inserts
Supported Test Standards
Compatible Grips & Fixtures
Floor-standing testing machines — Frames for full-size fastener loads
Hydraulic testing machines — High-capacity bolt testing
Bolt grips — Other fastener test fixtures
Steel Fastener Grip ISO 898-1 1000 kN — Heavy-duty grip for large fasteners
Adapters — Fit the Ø 40 mm clevis to your load string
“Customer quote”
Related Equipment
UGC-SH-160 Steel Fastener Grip ISO 898-1 1000 kN
Heavy-duty insert holder for tensile tests on full-size bolts, screws and studs up to 1000 kN, mounted in a larger wedge
UGC-SH-320 Coating Bond Strength Tensile Fixture ISO 4624
Self-aligning pull-off fixture with interchangeable test cylinders for tensile adhesion of paints, coatings and thermal
UGC-SH-340 Adhesive Bond Tensile Fixture GOST 14760
Pair of bond-strength fixtures hung from universal joint adapters, so a bonded insert joint is pulled in pure tension to
UGC-SH-310 Spherically Seated Shoulder Grip Carrier 60 mm
300 kN side-loading carrier with a self-aligning spherical seat and interchangeable inserts for button-head, threaded an
Fastener Tensile Test Fixture ISO 898-1 FAQ
What does the UGC-SH-330 test?
Tensile strength of full-size screws, bolts and nuts, with the load applied between the underside of the head and the engaged thread as in ISO 898-1 test 9.1.
Where can I find the ISO 898-1 requirements?
Our complete ISO 898-1 guide summarizes the tests, fixture requirements and minimum values by property class.
How are different thread sizes handled?
Each thread size has its own insert, retained by a pin. Pull the pin, change the insert and the holders are ready for the next size.
What is the load capacity?
The rating is set on request to suit your largest thread size and property class; tell us both when you inquire.
How does the fixture connect to my machine?
Both holders use a female clevis with a Ø 40 mm pin. Other couplings are available through adapters.
Can it also test nuts?
Yes. With the appropriate inserts the same carrier set is used for screws, bolts and nuts.




