Home › Products › Shoulder and Button Head Grips › Withdrawal Resistance Test Fixture





Withdrawal Resistance Test Fixture – Pull-Out Cage Family
Open-cage upper grips with slotted, interchangeable inserts for withdrawal and pull-through tests on anchors, fasteners and inserts, up to 500 kN.
Brand: Universal Grip | Model: UGC-SH-210 | ● Configured to order
Open cage with side slot: the specimen head slides in without dismantling the fixture
Interchangeable inserts with 12, 18, 20, 24 or 32 mm holes
Gap 4–60 mm and internal height 50–130 mm, selected by version
Cage sizes 100 x 100 mm, Ø 118 mm and Ø 136 mm
Universal joint versions let the cage self-align with the load axis
Largest version rated to 500 kN (about 112,400 lbf)
Optional T-slotted 250 x 250 mm base platen to hold the specimen body
Downloads and standards
Trusted by Global Companies


























Pull-out cage fixtures for withdrawal resistance testing
The UGC-SH-210 family covers upper-grip cage fixtures that measure how much force it takes to pull an anchor, fastener or embedded insert out of its host material. Construction product makers, fixing manufacturers and building materials labs use these cages when the specimen has a head or collar that can be caught from below, but no shank that a conventional grip could clamp.
How the cage works
The head of the specimen passes through a slotted insert seated in the floor of an open cage. When the cage is pulled upward the insert bears on the underside of the head, while the body of the specimen, or the block it is set in, is restrained by a separate lower grip or a T-slotted 250 x 250 mm platen. The side slot means the specimen is loaded sideways, which matters when the fixing is already installed in a concrete or panel sample.
Versions
Ø 136 mm cage, inserts 18/20/24 mm: three 50 x 50 mm inserts, female clevis Ø 15.9 mm (5/8 in). Also offered on its own as UGC-SH-240.
Ø 136 mm, gap 32 mm, height 50 mm: inserts 32/24/12 mm with a universal joint.
Ø 118 mm, slot 25 mm, height 58 mm: Ø 24 mm insert with R3 edge, female clevis Ø 20 mm.
Gap 10 mm / height 100 mm and gap 30 mm / height 80 mm: universal joint versions for taller specimen heads.
100 x 100 mm cage, slot 4 mm: for small-diameter fixings.
Maximum load depends on the version; the heaviest cage is rated to 500 kN. All cages are nickel-plated steel.
Typical applications
Anchors and fixings, construction fasteners, cast-in or bonded inserts in concrete and panels, and general component pull-out work. For nails in wood-based panels, the dedicated nail withdrawal fixture UGC-SH-360 is a better fit; for threaded fasteners loaded through the head, see our bolt grips.
Choosing the right cage and machine
Pick the cage by specimen head diameter and height: the insert hole must clear the shank, and the internal height must clear the head plus any washer. Light pull-out work sits comfortably on benchtop universal testing machines, while the 500 kN version calls for a floor-standing or hydraulic frame. Galdabini machines from 2.5 kN to 2,000 kN cover the whole range, and adapters connect the Ø 15.9 mm or Ø 20 mm clevis to other crossheads.
Tell us the head diameter and height, the insert holes and gap you need, and the expected peak load, and we will recommend a cage.
Withdrawal Resistance Test Fixture Specifications
TEST TYPE
Withdrawal / pull-out resistance
CAGE SIZE
100 x 100 mm, Ø 118 mm or Ø 136 mm
GAP
4–60 mm (by version)
INTERNAL HEIGHT
50–130 mm (by version)
INSERT HOLES
12, 18, 20, 24 or 32 mm
MAX. LOAD
Version-dependent, up to 500 kN
MATERIAL
Steel, nickel-plated
COUPLING
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others via adapter
LOWER FIXTURE
Lower grip required; T-slotted platen 250 x 250 mm available
PART REF.
UGC-SH-210
Models & Options
Name — Description (Part #)
Ø 136 mm cage, inserts 18/20/24 mm — Three 50 x 50 mm inserts, female clevis Ø 15.9 mm (5/8 in) (Specify at order)
Ø 136 mm, gap 32 mm, height 50 mm — Inserts 32/24/12 mm, universal joint, female clevis Ø 15.9 mm (5/8 in) (Specify at order)
Ø 118 mm, slot 25 mm, height 58 mm — Insert Ø 24 mm, R3, female clevis Ø 20 mm (Specify at order)
Gap 10 mm, height 100 mm — Universal joint, female clevis Ø 15.9 mm (5/8 in) (Specify at order)
Gap 30 mm, height 80 mm — Universal joint, female clevis Ø 15.9 mm or Ø 20 mm (Specify at order)
100 x 100 mm cage, slot 4 mm — Female clevis Ø 15.9 mm (5/8 in) (Specify at order)
T-slotted base platen — 250 x 250 mm, holds the specimen body (On request)
What's Included
Upper cage fixture in the selected size, with the inserts listed for that version
Universal joint adapter on the versions that specify one
Lower grip or T-slotted platen is not part of the cage and is ordered separately
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Floor-standing testing machines — Frames for high-load pull-out versions
Hydraulic testing machines — For the 500 kN cage and heavy anchors
Adapters — Connect the Ø 15.9 mm or Ø 20 mm clevis to your crosshead
Nail Withdrawal Resistance Fixture — Direct nail withdrawal from wood panels
Bolt grips — Grips for threaded fasteners and bolts
“Customer quote”
Related Equipment
UGC-SH-360 Nail Withdrawal Resistance Fixture
Upper grip with adjustable 3–30 mm sample gap and 1.75 mm radius nail slot for direct nail withdrawal tests on wood-base
UGC-SH-200 Split Disc Pipe Tensile Fixture
Split disc and split ring fixtures that load a ring cut from plastic or reinforced pipe in hoop tension, rated to 80 kN
UGC-SH-220 Button Head Grips with Split Inserts
Carrier grips with two-piece inserts that close around the shank and seat the head of button-head and shoulder-end round
UGC-SH-190 Bullet Pull Test Fixture
Caliber-specific base holders and matching bullet holders for measuring the force to pull a bullet from its cartridge ca
Withdrawal Resistance Test Fixture FAQ
What is a withdrawal resistance test fixture?
It is an upper grip shaped as an open cage. A slotted insert in the cage floor catches the head of an anchor or fastener, and pulling the cage upward measures the force needed to withdraw it.
Is a lower grip included?
No. The cage is the upper fixture only; the specimen body or host block is held in a separate lower grip or on the optional T-slotted 250 x 250 mm platen.
How do I choose the gap and internal height?
The insert hole must clear the specimen shank and the internal height must clear the head. Versions run from a 4 mm gap to 60 mm and from 50 mm to 130 mm internal height.
What is the maximum load?
It depends on the version. The largest cage is rated to 500 kN (about 112,400 lbf); confirm the rating of smaller cages at quote.
Why choose a universal joint version?
A universal joint lets the cage align itself with the load axis, which reduces bending when the fixing is not perfectly square to the host material.
What couplings are available?
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm as standard; other couplings are made with adapters.




