Home › Products › Shoulder and Button Head Grips › Nail Withdrawal Resistance Fixture





Nail Withdrawal Resistance Fixture – ASTM D1037 Fig. 11
Upper grip with adjustable 3–30 mm sample gap and 1.75 mm radius nail slot for direct nail withdrawal tests on wood-based panels, 10 kN.
Brand: Universal Grip | Model: UGC-SH-360 | ● Configured to order
Built to the direct nail withdrawal arrangement of ASTM D1037, Fig. 11
Adjustable sample gap for panels 3 to 30 mm (about 0.12 to 1.18 in) thick
Nail slot with 1.75 mm radius
Serrated-jaw lower grip holds the nail securely
Nickel-plated steel, rated to 10 kN (about 2,250 lbf)
Male clevis with Ø 25 mm pin hole
Standards: ASTM D1037
Trusted by Global Companies


























Nail withdrawal fixture for wood-based panels
The UGC-SH-360 measures how strongly a nail is held by a wood-based panel, using the direct withdrawal arrangement shown in ASTM D1037, Fig. 11. Particleboard and fiberboard mills, building product manufacturers and timber labs use it to compare fastener holding capacity between products, densities and resin systems.
How it works
A nail is driven into the panel sample beforehand. The sample is placed in the upper grip, whose gap adjusts to panels from 3 to 30 mm thick, and the nail projects through a slot with a 1.75 mm radius. Below, a lower grip with serrated jaws clamps the nail. As the crossheads separate, the panel is held back by the upper grip and the nail is drawn straight out, giving the peak withdrawal force.
Design details
Adjustable gap: one fixture covers thin hardboard through thick particleboard.
Radiused nail slot: 1.75 mm radius locates the nail shank close to the bearing face.
Serrated lower jaws: grip the nail without slipping as force builds.
Material: nickel-plated steel, rated to 10 kN.
Coupling: male clevis with a Ø 25 mm pin hole on the upper grip.
Because the gap is set to the panel thickness before each run, the sample sits firmly against the bearing face and does not tilt as the nail starts to move, which keeps results comparable between panels of different thickness.
Typical applications
Particleboard and fiberboard, OSB and other wood-based panel products, fastener holding capacity studies and building products laboratories. On the same panels, the EN 311 surface soundness fixture UGC-SH-260 measures face-layer strength, and for anchors and screws in concrete or panels the withdrawal resistance fixtures UGC-SH-210 use an open-cage design.
Machine fit
The fixture is rated to 10 kN, so a 10 kN benchtop testing machine covers it fully, and Galdabini universal testing machines start at 2.5 kN. Where withdrawal loads stay within 1,500 lbF, a Mark-10 F-series 1,500 lb motorized tester is a compact alternative for production QC. The male clevis connects through adapters to machines with other couplings.
Send the nail diameter, panel thickness range and your machine coupling, and we will confirm the setup, including the lower grip.
Nail Withdrawal Resistance Fixture Specifications
MAX. LOAD
10 kN
TEST TYPE
Direct nail withdrawal from wood panels
SAMPLE THICKNESS
3–30 mm, adjustable
NAIL SLOT RADIUS
1.75 mm
LOWER GRIP
Serrated jaws
MATERIAL
Steel, nickel-plated
COUPLING
Male clevis, Ø 25 mm pin hole
STANDARD
ASTM D1037, Fig. 11
PART REF.
UGC-SH-360
Models & Options
Name — Description (Part #)
Nail withdrawal upper grip — Adjustable 3–30 mm sample gap, 1.75 mm nail slot radius, male clevis Ø 25 mm pin hole (Specify at order)
Serrated-jaw lower grip — Holds the nail during withdrawal (Specify at order)
Other couplings — Adapter to suit your testing machine (On request)
What's Included
Upper sample grip with adjustable gap and radiused nail slot
Serrated-jaw lower grip for the nail; confirm at quote whether it ships with the upper grip
Coupling adapters quoted separately if needed
Supported Test Standards
ASTM D1037 — Evaluating properties of wood-base fiber and particle panel materials
Compatible Grips & Fixtures
10 kN benchtop testing machine — Matches the 10 kN rating
1,500 lb tensile tester — Compact tester for routine withdrawal QC
Wood Panel Surface Soundness Fixture EN 311 — Face-layer strength of panels
Withdrawal Resistance Test Fixture — Cage fixtures for anchors and fasteners
Adapters — Connect the male clevis to other crossheads
“Customer quote”
Related Equipment
UGC-SH-210 Withdrawal Resistance Test Fixture
Open-cage upper grips with slotted, interchangeable inserts for withdrawal and pull-through tests on anchors, fasteners
UGC-SH-260 Wood Panel Surface Soundness Fixture EN 311
Anodized aluminum pull-off fixture with bonded stainless steel pads for surface soundness tests on particleboard, MDF an
UGC-SH-350 Shoulder Grip with Quick-Change Inserts 70 mm
250 kN hardened carrier with drop-in inserts for button-head, threaded-end and screw-head round metallic specimens; chan
UGC-SH-370 Heavy Duty Specimen Holder 100 kN
Spherically seated 100 kN holder with thumb-screw-retained inserts for 0.75 in and 0.5 in shouldered round tensile speci
Nail Withdrawal Resistance Fixture FAQ
What test does the UGC-SH-360 perform?
Direct withdrawal of a nail from a wood-based panel, following the fixture arrangement in ASTM D1037, Fig. 11.
What panel thicknesses can it hold?
The upper grip gap adjusts from 3 to 30 mm, about 0.12 to 1.18 in.
How is the nail held?
The nail projects through a slot with a 1.75 mm radius and is clamped by a lower grip with serrated jaws.
What is the load rating?
The fixture is rated to 10 kN (about 2,250 lbf), a match for a 10 kN benchtop testing machine.
What coupling does it use?
The upper grip has a male clevis with a Ø 25 mm pin hole; other connections are made with adapters.
Is the lower grip part of the order?
The serrated-jaw lower grip is part of the setup; we confirm on the quote whether it ships with the upper grip or as a separate line.




