Home › Products › Shoulder and Button Head Grips › Bullet Pull Test Fixture





Bullet Pull Test Fixture – Cartridge and Bullet Holders
Caliber-specific base holders and matching bullet holders for measuring the force to pull a bullet from its cartridge case.
Brand: Universal Grip | Model: UGC-SH-190 | ● Configured to order
Measures bullet pull (extraction) force from the cartridge case
Caliber-specific base holders locate the case securely and on axis
Upper holders in several bullet diameters grip the projectile
Base holders for .223 Rem, 9 mm Luger, .308 Win and .50 BMG
Hardened, nickel-coated steel stands up to repeated tests
Female clevis coupling for a 20 mm pin; others via adapter
Downloads and standards
Trusted by Global Companies


























Bullet pull testing for ammunition production
The force needed to pull a bullet from its case is a direct check on crimp and neck tension. Too little and the bullet can move in the case during handling or feeding; too much, or too much scatter, points to a problem in the seating and crimping process. The UGC-SH-190 is a fixture for measuring that bullet pull (extraction) force. It is used in ammunition manufacturing, in crimp and neck tension control, for reloading component testing and in ballistics laboratories.
How it works
The loaded cartridge is located in a base holder made for its caliber, which supports the case and keeps it on the load axis. The bullet is gripped in a matching upper holder sized to the projectile diameter. As the crosshead rises, the two holders pull the bullet and case apart in tension, and the testing machine records the peak force needed to start the bullet moving and the force as it is drawn out of the neck.
Because both holders are made for a specific case and bullet, the load stays axial and the case is not distorted, which gives repeatable values from round to round and lot to lot.
Holders
Base holder .223 Rem: holds the .223 Remington case
Base holder 9 mm Luger: holds the 9 x 19 mm case
Base holder .308 Win: holds the .308 Winchester case
Base holder .50 BMG: holds the .50 BMG case
Bullet holders: upper holders in several bullet diameters
Holders for other calibers can be made on request; tell us the cartridge and bullet diameters.
Construction and coupling
All holders are hardened, nickel-coated steel for repeated use. The machine connection is a female clevis for a 20 mm (0.79 in) pin, and other couplings are handled with our adapters. Operation is manual. The maximum load is confirmed at quote, since pull forces vary widely between a 9 mm pistol round and a .50 BMG cartridge.
Machine fit
Bullet pull tests are typically run on a Galdabini bench-top universal testing machine. Smaller calibers may also suit a Mark-10 F-series motorized tensile tester; we confirm the right frame once we know your calibers and expected forces. For automated data collection across a lot, see our test software.
Tell us the calibers you test (cartridge and bullet diameters), the expected maximum load and your machine coupling, and we will quote the holder set. Request a quote.
Bullet Pull Test Fixture Specifications
TEST TYPE
Bullet pull / extraction force
SPECIMEN
Loaded cartridges, caliber-specific
HOLDERS
Base holder for case, upper holder for bullet
MAX. LOAD
On request
MATERIAL
Steel, hardened, nickel-coated
COUPLING
Female clevis, Ø 20 mm pin; others via adapter
OPERATION
Manual
PART REF.
UGC-SH-190
Models & Options
Base holder .223 Rem — Holds .223 Remington case (Specify at order)
Base holder 9 mm Luger — Holds 9 x 19 mm case (Specify at order)
Base holder .308 Win — Holds .308 Winchester case (Specify at order)
Base holder .50 BMG — Holds .50 BMG case (Specify at order)
Bullet holders — Upper holders in several bullet diameters (Specify at order)
Other calibers — Base and bullet holders for further cartridges (On request)
What's Included
Base holder for each caliber ordered
Upper bullet holder in the matching diameter
Female clevis couplings for 20 mm pin
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Benchtop universal testing machines — Galdabini bench-top frames
Tensile testers — Mark-10 F-series testers for smaller calibers
Software — Data collection across production lots
Adapters — For other machine couplings
“Customer quote”
Related Equipment
UGC-SH-180 Plating Embrittlement Shoulder Grip
Shoulder grip with hardened inserts for ASTM F519 type 1a.2 notched round specimens, for sustained-load hydrogen embritt
UGC-SH-200 Split Disc Pipe Tensile Fixture
Split disc and split ring fixtures that load a ring cut from plastic or reinforced pipe in hoop tension, rated to 80 kN
UGC-SH-160 Steel Fastener Grip ISO 898-1 1000 kN
Heavy-duty insert holder for tensile tests on full-size bolts, screws and studs up to 1000 kN, mounted in a larger wedge
UGC-SH-210 Withdrawal Resistance Test Fixture
Open-cage upper grips with slotted, interchangeable inserts for withdrawal and pull-through tests on anchors, fasteners
Bullet Pull Test Fixture FAQ
What does a bullet pull test measure?
The force needed to pull the bullet out of the cartridge case, which reflects crimp and neck tension.
Which calibers are available?
Base holders for .223 Rem, 9 mm Luger, .308 Win and .50 BMG, plus upper bullet holders in several diameters. Other calibers on request.
Do I need a separate holder for each caliber?
Yes. Each base holder is made for one case, and the upper holder must match the bullet diameter.
What is the maximum load?
It is confirmed at quote, since pull forces vary widely between calibers.
How do the holders mount?
Each holder has a female clevis for a 20 mm (0.79 in) pin; we can supply an adapter for other couplings.




