Wire Terminal Pull Test Grip 20 kN | Universal Grip
top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Wire Terminal Grip 20 kN

UGC-SH-250 wire terminal grip with rotatable slotted wheel and locking pin for crimp pull tests by Universal Grip
UGC-SH-250 wire terminal grip with rotatable slotted wheel and locking pin for crimp pull tests by Universal Grip
UGC-SH-250 Wire Terminal Grip 20 kN by Universal Grip, view 2
UGC-SH-250 Wire Terminal Grip 20 kN by Universal Grip, view 3
UGC-SH-250 Wire Terminal Grip 20 kN by Universal Grip, view 4

Wire Terminal Grip 20 kN – Slotted Wheel for Crimp Pull Tests

Self-aligning slotted wheel grip for pull-off tests on crimped terminals, lugs and connectors, with 60 mm or 150 mm wheels and 20 kN capacity.

Brand: Universal Grip  |  Model: UGC-SH-250  |  ● Configured to order

  • Rotatable wheel with equally spaced slots; turn it to the size you need

  • 60 mm wheel: 12 slot widths from 1 to 6 mm

  • 150 mm wheel: 8 slot widths from 2.6 to 11.8 mm

  • Locking pin fixes the selected slot; the wheel self-aligns with the pull

  • Rated to 20 kN (about 4,500 lbf)

  • 150 mm wheel usable from -70 to 280 °C (-94 to 536 °F)

  • Custom wheels and slot widths available

Downloads and standards

Trusted by Global Companies

Wire terminal grip for crimp and connector pull-off tests

The UGC-SH-250 holds the tongue or shank of a crimped wire terminal so you can measure how much force the crimp withstands before the wire pulls out. It is used by harness makers, terminal manufacturers and electrical QC labs that test many terminal sizes and want one grip that covers them without changing jaws.

 

How the slotted wheel works

A rotatable wheel carries equally spaced slots of different widths around its edge. You turn the wheel until the slot that matches the terminal shank faces down, hook the terminal into it and lock the wheel with the pin. The wire end is clamped in a separate lower grip. Because the wheel self-aligns with the load axis, the terminal is pulled straight rather than peeled sideways.

 

Wheel sizes

  • Ø 60 mm wheel: 12 slots of 1, 1.2, 1.6, 2, 2.4, 2.7, 3, 4, 4.5, 5, 5.5 and 6 mm; 0.7 kg; 0 to 70 °C.

  • Ø 150 mm wheel: 8 slots of 2.6, 3, 4, 5, 6, 8, 10 and 11.8 mm; 2.9 kg; -70 to 280 °C (-94 to 536 °F).

The small wheel suits fine-wire ferrules and small ring terminals; the large wheel takes heavier cable lugs and can go inside an environmental chamber for hot or cold crimp tests. Wheels with other slot sizes can be made to order.

 

Typical applications

Crimped cable lugs and ring terminals, wire ferrules and end sleeves, wire rope clamps, and automotive and electrical harness components. For the wire side, a vise grip or wrap grip is a common partner; tell us the wire gauge and we will suggest one.

 

Choosing a tester

The grip itself is rated to 20 kN, but most terminal pull-off forces are far lower, so the tester can be sized to your largest terminal rather than to the grip. Mark-10 F-series motorized tensile testers (100–1,500 lbF) handle many small and mid-size terminals, while a 25 kN benchtop testing machine covers the full grip rating. The female clevis takes a Ø 15.9 mm (5/8 in) pin; adapters cover other machine connections.

Let us know the terminal shank widths, wheel size and the lower grip you plan to use, and we will put the set together.

Product video

At a glance

  • Max. load: 20 kN

  • Test type: Pull strength of wire terminals and connectors

  • Wheel diameter: Ø 60 mm or Ø 150 mm

  • Slot widths: 1–6 mm (12 slots) or 2.6–11.8 mm (8 slots)

  • Material: Steel, nickel-plated

  • Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

Wire Terminal Grip 20 kN Specifications

MAX. LOAD

20 kN

 

TEST TYPE

Pull strength of wire terminals and connectors

 

WHEEL DIAMETER

Ø 60 mm or Ø 150 mm

 

SLOT WIDTHS

1–6 mm (12 slots) or 2.6–11.8 mm (8 slots)

 

MATERIAL

Steel, nickel-plated

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin; others on request

 

TEMPERATURE RANGE

0 to 70 °C (Ø 60 mm); -70 to 280 °C (Ø 150 mm)

 

WEIGHT

0.7 kg (Ø 60 mm); 2.9 kg (Ø 150 mm)

 

SCOPE OF DELIVERY

1 grip incl. locking pin

 

PART REF.

UGC-SH-250

 

Models & Options

  • Name — Description (Part #)

  • Wheel Ø 60 mm — 12 slots: 1, 1.2, 1.6, 2, 2.4, 2.7, 3, 4, 4.5, 5, 5.5, 6 mm; 0 to 70 °C (Specify at order)

  • Wheel Ø 150 mm — 8 slots: 2.6, 3, 4, 5, 6, 8, 10, 11.8 mm; -70 to 280 °C (Specify at order)

  • Custom wheel — Other diameters or slot widths (On request)

What's Included

  • One wire terminal grip with the selected wheel

  • Locking pin

  • Lower grip for the wire is not included and is ordered separately

Supported Test Standards

Standards list

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-230 Shoulder Grips with Slot

UGC-SH-230 Shoulder Grips with Slot

Hardened slotted grips that hold shoulder-head round specimens from the side, with a fixing ring that keeps the slot clo

UGC-SH-260 Wood Panel Surface Soundness Fixture EN 311

UGC-SH-260 Wood Panel Surface Soundness Fixture EN 311

Anodized aluminum pull-off fixture with bonded stainless steel pads for surface soundness tests on particleboard, MDF an

UGC-SH-220 Button Head Grips with Split Inserts

UGC-SH-220 Button Head Grips with Split Inserts

Carrier grips with two-piece inserts that close around the shank and seat the head of button-head and shoulder-end round

UGC-SH-270 Fracture Mechanics Clevis Grips

UGC-SH-270 Fracture Mechanics Clevis Grips

Pin-loading clevis grips for compact tension specimens in fracture toughness and fatigue crack growth tests, in several

Wire Terminal Grip 20 kN FAQ

How does the wire terminal grip work?

Turn the wheel to the slot that fits the terminal shank, hook the terminal in, and lock the wheel with the pin. The wire is clamped in a separate lower grip and the two are pulled apart.

 

Which wheel should I choose?

The Ø 60 mm wheel has 12 slots from 1 to 6 mm for small terminals and ferrules; the Ø 150 mm wheel has 8 slots from 2.6 to 11.8 mm for larger lugs.

 

Can the grip be used at high or low temperature?

The Ø 150 mm wheel is rated from -70 to 280 °C (-94 to 536 °F), so it can go in an environmental chamber. The Ø 60 mm wheel is for 0 to 70 °C.

 

Is a lower grip included?

No. The order covers one terminal grip with locking pin; the grip for the wire is chosen to suit the wire size and ordered separately.

 

Do I need a 20 kN machine?

Only if your terminals approach that force. Many terminal pulls fall within the 100–1,500 lbF range of our tensile testers.

 

Can you make a wheel with my slot sizes?

Yes. Customized wheels and slot widths are available; send the terminal shank dimensions.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page