top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Fracture Mechanics Clevis Grips

UGC-SH-270 fracture mechanics clevis grip with loading pin for compact tension CT specimens by Universal Grip
UGC-SH-270 fracture mechanics clevis grip with loading pin for compact tension CT specimens by Universal Grip
UGC-SH-270 Fracture Mechanics Clevis Grips by Universal Grip, view 2
UGC-SH-270 Fracture Mechanics Clevis Grips by Universal Grip, view 3
UGC-SH-270 Fracture Mechanics Clevis Grips by Universal Grip, view 4

Fracture Mechanics Clevis Grips – CT Specimens, ASTM E399/E647

Pin-loading clevis grips for compact tension specimens in fracture toughness and fatigue crack growth tests, in several pin hole and gap sizes.

Brand: Universal Grip  |  Model: UGC-SH-270  |  ● Configured to order

  • Clevis geometry designed to ASTM E399 and ASTM E647

  • Pin loading through the CT specimen holes, no clamping of the specimen

  • Pin hole / gap pairs from 6.35 / 13.08 mm up to 19.18 / 42.16 mm

  • Clearance for clip-on crack opening displacement (COD) gauges

  • Suited to static and cyclic (fatigue) loading

  • High-temperature version with protection shield, up to 1150 °C

Standards: ASTM E399  ·  ASTM E647  ·  ISO 12135

Trusted by Global Companies

Clevis grips for compact tension fracture mechanics tests

The UGC-SH-270 clevis grips load compact tension (CT) specimens through their pin holes for linear-elastic plane-strain fracture toughness and fatigue crack growth testing. They are used by metals labs, aerospace and power generation suppliers, and weld qualification programs that need repeatable KIC and da/dN data.

 

How the clevis works

The CT specimen sits in the gap between the clevis arms and is held by loading pins through its two holes, so load is applied exactly where ASTM E399 and ASTM E647 require. Gap width and pin hole diameter are matched to specimen thickness and width, and the clevis leaves room in front of the notch for a clip-on crack opening displacement gauge from our extensometer range. For the test procedure, specimen sizing and validity checks, see our complete ASTM E399 guide.

 

Versions

  • Pin hole 6.35 mm (0.25 in), gap 13.08 mm: rated to 5 kN (about 1,120 lbf), internal thread M12 x 1.25, 25 x 25 mm base, for small CT specimens.

  • Pin hole 12.7 mm (0.5 in), gap 25.4 mm (1 in): ASTM E399 version with female clevis Ø 15.9 mm (5/8 in).

  • Pin hole 15 mm, gap 16 mm: ASTM E647 version with internal thread M27 x 2.

  • Pin hole 19.18 mm, gap 42.16 mm: large clevis with female clevis Ø 40 mm.

  • High-temperature version: with protection shield, for use up to 1150 °C (2,102 °F).

Load ratings above the smallest version are confirmed on request because they depend on clevis size, material and whether the grip runs static or cyclic tests.

 

Typical applications

Fracture toughness of metals, fatigue crack growth rate curves, aerospace and power generation alloys, and weld procedure and material qualification. For fatigue-rated wedge and hydraulic grips used on other specimen types, see fatigue grips.

 

Choosing a clevis and frame

Start from the CT specimen width W and thickness B: these set the pin hole and gap. Then confirm load, static or fatigue duty and test temperature. Static KIC tests run on floor-standing universal testing machines, and Galdabini frames from 2.5 kN to 2,000 kN cover small to very thick specimens. The threaded versions mount on actuator or load cell threads, and adapters cover other connections.

Send us the CT specimen dimensions, peak load, test temperature and machine coupling, and we will specify the clevis set.

Product video

At a glance

  • Test type: Fracture toughness (K_IC) and fatigue crack growth

  • Specimen: Compact tension (CT) specimens

  • Pin hole / gap: 6.35 / 13.08 mm, 12.7 / 25.4 mm, 15 / 16 mm, 19.18 / 42.16 mm

  • Max. load: Version-dependent; 5 kN for smallest version, others on request

  • Material: Steel, nickel-plated

  • Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 40 mm, internal thread M12 x 1.25 or M27 x 2

Fracture Mechanics Clevis Grips Specifications

TEST TYPE

Fracture toughness (K_IC) and fatigue crack growth

 

SPECIMEN

Compact tension (CT) specimens

 

PIN HOLE / GAP

6.35 / 13.08 mm, 12.7 / 25.4 mm, 15 / 16 mm, 19.18 / 42.16 mm

 

MAX. LOAD

Version-dependent; 5 kN for smallest version, others on request

 

MATERIAL

Steel, nickel-plated

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in) or Ø 40 mm, internal thread M12 x 1.25 or M27 x 2

 

OPERATION

Manual, pin-loaded

 

HIGH-TEMPERATURE VERSION

With protection shield, up to 1150 °C

 

STANDARDS

ASTM E399, ASTM E647

 

PART REF.

UGC-SH-270

 

Models & Options

  • Name — Description (Part #)

  • Pin hole 6.35 mm, gap 13.08 mm — Max. 5 kN, internal thread M12 x 1.25, base 25 x 25 mm (Specify at order)

  • Pin hole 12.7 mm, gap 25.4 mm — ASTM E399, female clevis Ø 15.9 mm (5/8 in) (Specify at order)

  • Pin hole 15 mm, gap 16 mm — ASTM E647, internal thread M27 x 2 (Specify at order)

  • Pin hole 19.18 mm, gap 42.16 mm — Female clevis Ø 40 mm (Specify at order)

  • High-temperature version — With protection shield, up to 1150 °C (On request)

What's Included

  • Clevis grips in the pin hole and gap size ordered

  • Coupling as specified (clevis or internal thread)

  • Scope (single grip or pair, loading pins) confirmed with your quote

Supported Test Standards

  • ASTM E399 — Plane-strain fracture toughness (K_IC) of metallic materials

  • ASTM E647 — Measurement of fatigue crack growth rates

  • ISO 12135 — Metallic materials – quasistatic fracture toughness

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-260 Wood Panel Surface Soundness Fixture EN 311

UGC-SH-260 Wood Panel Surface Soundness Fixture EN 311

Anodized aluminum pull-off fixture with bonded stainless steel pads for surface soundness tests on particleboard, MDF an

UGC-SH-280 Elastic Fabric Band Grips and O-Ring Hooks

UGC-SH-280 Elastic Fabric Band Grips and O-Ring Hooks

Anvil-type band grips for looped elastic fabric tests to ASTM D4964, plus roller hooks for tensile tests on O-rings up t

UGC-SH-250 Wire Terminal Grip 20 kN

UGC-SH-250 Wire Terminal Grip 20 kN

Self-aligning slotted wheel grip for pull-off tests on crimped terminals, lugs and connectors, with 60 mm or 150 mm whee

UGC-SH-290 Chemical-Resistant Mortar Shoulder Grip

UGC-SH-290 Chemical-Resistant Mortar Shoulder Grip

Pair of 10 kN briquette grips with tapered seats for tensile strength tests on chemical-resistant mortars, grouts and mo

Fracture Mechanics Clevis Grips FAQ

What specimens do these clevis grips take?

Compact tension (CT) specimens, loaded through pins in their two holes. The pin hole and gap are matched to the specimen width and thickness.

 

Which standards are the grips designed for?

The clevis geometry follows ASTM E399 for plane-strain fracture toughness and ASTM E647 for fatigue crack growth. Our ASTM E399 guide covers the test itself.

 

Can they be used for fatigue tests?

Yes. The grips are suited to static and cyclic loading; tell us the load ratio and frequency so we can confirm the rating.

 

Is there room for a COD gauge?

Yes. The clevis is designed with clearance for a clip-on crack opening displacement gauge at the notch mouth; see extensometers.

 

What is the load capacity?

The smallest version (6.35 mm pin hole) is rated to 5 kN; ratings for the larger versions are given on request based on specimen size and duty.

 

Do you offer a high-temperature version?

Yes, a version with a protection shield is available for use up to 1150 °C (2,102 °F). Material and coupling are agreed at quote.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page