Home › Products › Shoulder and Button Head Grips › Wood Panel Surface Soundness Fixture EN 311





Wood Panel Surface Soundness Fixture EN 311
Anodized aluminum pull-off fixture with bonded stainless steel pads for surface soundness tests on particleboard, MDF and other wood-based panels.
Brand: Universal Grip | Model: UGC-SH-260 | ● Configured to order
Built around the EN 311 surface soundness pull-off method
Anodized aluminum upper and lower parts keep the fixture to 2.3 kg
Reusable stainless steel pads, bonded to the panel inside a milled groove
Rated to 5 kN (about 1,120 lbf)
Usable from -70 to 180 °C (-94 to 356 °F)
Optional universal joint adapter for an axial pull
Spare pads sold singly or in packs of 10
Standards: EN 311
Trusted by Global Companies


























Surface soundness fixture for particleboard and MDF
The UGC-SH-260 measures the tensile strength of the surface layer of wood-based panels by pulling a bonded pad straight off the face of the board, the method set out in EN 311. Panel mills, laminators and furniture manufacturers use the result to check that the face layer will hold a laminate, foil or coating without delaminating.
How it works
A circular groove is milled into the panel surface and a stainless steel pad is glued inside it, isolating a defined test area. The lower part of the fixture holds the panel, and the upper part couples to the pad. When the testing machine pulls, the force acts perpendicular to the panel face until the surface layer tears away. The peak force divided by the pad area gives the surface soundness.
Construction and options
Upper and lower parts in anodized aluminum, so the fixture weighs 2.3 kg without adapter and is easy to handle at the bench.
Stainless steel pads that can be cleaned and reused; order extras singly or in packs of 10 so you can bond a batch of specimens while the previous set cures.
Universal joint adapter (optional) to keep the pull axial when a panel is not perfectly flat.
Spare lower part available separately.
The fixture is rated to 5 kN and works from -70 to 180 °C, so it can be used in an environmental chamber when panels are tested hot or cold.
Typical applications
Particleboard and MDF production control, laminated and coated panels, incoming board inspection at furniture plants, and wood products laboratories. For fastener holding tests on the same panels, see the nail withdrawal fixture UGC-SH-360.
Testing machine fit
At 5 kN (about 1,120 lbf) the fixture fits a 5 kN benchtop testing machine or Galdabini universal testing machines from 2.5 kN upward, and it also suits a 1,500 lb motorized tensile tester for routine QC. The female clevis takes a Ø 15.9 mm (5/8 in) or Ø 20 mm pin; other couplings are available on request or through adapters.
Tell us your machine coupling, whether you want the universal joint adapter and how many spare pads to include, and we will quote the set.
Product video
At a glance
Max. load: 5 kN
Test type: Surface soundness (pull-off) of wood-based panels
Material: Upper and lower part anodized aluminum; pad stainless steel
Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others on request
Temperature range: -70 to 180 °C; other ranges on request
Weight: 2.3 kg (excl. adapter)
Wood Panel Surface Soundness Fixture EN 311 Specifications
MAX. LOAD
5 kN
TEST TYPE
Surface soundness (pull-off) of wood-based panels
MATERIAL
Upper and lower part anodized aluminum; pad stainless steel
COUPLING
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others on request
TEMPERATURE RANGE
-70 to 180 °C; other ranges on request
WEIGHT
2.3 kg (excl. adapter)
SCOPE OF DELIVERY
1 upper part, 1 lower part, 1 pad
OPTIONS
Universal joint adapter; extra pads (1 or 10 pcs)
STANDARD
EN 311, DIN EN 311
PART REF.
UGC-SH-260
Models & Options
Name — Description (Part #)
Complete fixture — Upper part, lower part and 1 stainless steel pad (Specify at order)
Pad, single — Stainless steel pull-off pad (On request)
Pads, pack of 10 — Stainless steel pull-off pads (On request)
Lower part — Spare lower part (On request)
Universal joint adapter — For axial alignment of the pull (On request)
What's Included
1 anodized aluminum upper part
1 anodized aluminum lower part
1 stainless steel pad
Universal joint adapter and extra pads are optional
Supported Test Standards
EN 311 — Wood-based panels – surface soundness – test method
Compatible Grips & Fixtures
5 kN benchtop testing machine — Matches the 5 kN fixture rating
1,500 lb tensile tester — Motorized tester for routine panel QC
Environmental chambers — Tests from -70 to 180 °C
Adapters — Other clevis or thread couplings
Nail Withdrawal Resistance Fixture — Fastener holding in wood panels
“Customer quote”
Related Equipment
UGC-SH-360 Nail Withdrawal Resistance Fixture
Upper grip with adjustable 3–30 mm sample gap and 1.75 mm radius nail slot for direct nail withdrawal tests on wood-base
UGC-SH-250 Wire Terminal Grip 20 kN
Self-aligning slotted wheel grip for pull-off tests on crimped terminals, lugs and connectors, with 60 mm or 150 mm whee
UGC-SH-270 Fracture Mechanics Clevis Grips
Pin-loading clevis grips for compact tension specimens in fracture toughness and fatigue crack growth tests, in several
UGC-SH-230 Shoulder Grips with Slot
Hardened slotted grips that hold shoulder-head round specimens from the side, with a fixing ring that keeps the slot clo
Wood Panel Surface Soundness Fixture EN 311 FAQ
What does a surface soundness test measure?
It measures the tensile strength of the outer layer of a wood-based panel by pulling a bonded pad off the surface, perpendicular to the face.
What is included with the UGC-SH-260?
One upper part, one lower part and one stainless steel pad. Extra pads, a spare lower part and a universal joint adapter are available separately.
Can the pads be reused?
Yes. The stainless steel pads are cleaned of adhesive and panel fibers after each test. Many labs keep a pack of 10 so several specimens can cure at once.
What load capacity does the fixture have?
It is rated to 5 kN (about 1,120 lbf), which fits a 5 kN benchtop testing machine or a 1,500 lb motorized tester.
Can I test panels at elevated or low temperature?
The fixture is rated from -70 to 180 °C (-94 to 356 °F); other ranges can be quoted on request.
Do I need the universal joint adapter?
It is optional. It helps keep the pull perpendicular to the panel when the surface is slightly uneven or the pad is not perfectly centered.




