Home › Products › Shoulder and Button Head Grips › Elastic Fabric Band Grips and O-Ring Hooks





Elastic Fabric Band Grips and O-Ring Hooks – ASTM D4964
Anvil-type band grips for looped elastic fabric tests to ASTM D4964, plus roller hooks for tensile tests on O-rings up to 1 kN.
Brand: Universal Grip | Model: UGC-SH-280 | ● Configured to order
Band grips with Ø 13 mm x 78 mm anvils for looped elastic fabric specimens
Set up for elongation and tension cycling to ASTM D4964
O-ring hooks with Ø 10 mm x 11 mm rollers, rated to 1 kN (about 225 lbf)
Rollers reduce friction and stress concentration on the ring
Nickel-plated steel construction
Other O-ring sizes and half radii on request
Standards: ASTM D4964
Trusted by Global Companies


























Loop grips for elastic fabric bands and O-rings
The UGC-SH-280 covers two pairs of grips for specimens that are tested as closed loops rather than as strips: elastic fabric bands and O-rings. Apparel and narrow-fabric producers use the band grips for waistbands and trims; seal makers and rubber goods labs use the O-ring hooks to measure tensile strength and elongation at break.
Elastic fabric band grips
For ASTM D4964, the looped specimen runs around two Ø 13 mm anvils, 78 mm long. The testing machine cycles the anvils apart and back to a set extension or force, and the software records tension at specified elongations. Because the loop slides freely around the anvils, the fabric is not clamped and the measured tension reflects the full band. See our complete ASTM D4964 guide for specimen preparation, cycling and calculations.
O-ring hook grips
For O-rings, two hooks each carry a Ø 10 mm roller, 11 mm wide. The ring is placed over both rollers and the hooks are pulled apart until it breaks. The rollers spread the contact and limit friction, which reduces stress concentration where the ring wraps the hook. The hook grips are rated to 1 kN, and other roller sizes and half radii can be made for different O-ring cross-sections.
Specifications at a glance
Band grips: anvils Ø 13 x 78 mm, female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm, load rating on request.
O-ring hooks: rollers Ø 10 x 11 mm, 1 kN, female clevis Ø 15.9 mm (5/8 in).
Material: nickel-plated steel; each version is supplied as a pair.
Typical applications
Elastic waistbands and narrow fabrics, textile and apparel testing, O-rings and seals, and rubber goods quality control. For dumbbell and ring tests on rubber compounds, see our elastomer testing page.
Machine fit
Both grip types work at low force, so a Mark-10 F-series motorized tester such as the 300 lb tensile tester or a 2.5 kN benchtop testing machine is usually enough. D4964 cycling needs a machine with programmable cycles, which our testing software provides on Galdabini frames.
Tell us which grips you need, the O-ring inside diameter and cross-section, and your machine coupling, and we will quote the pair.
Product video
At a glance
Test type: Loop tensile test of elastic bands and O-rings
Band grip anvils: Ø 13 mm, 78 mm long
O-ring hook rollers: Ø 10 mm, 11 mm wide, non-rotating hooks
Max. load: 1 kN (O-ring hooks); band grips on request
Material: Steel, nickel-plated
Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others via adapter
Elastic Fabric Band Grips and O-Ring Hooks Specifications
TEST TYPE
Loop tensile test of elastic bands and O-rings
BAND GRIP ANVILS
Ø 13 mm, 78 mm long
O-RING HOOK ROLLERS
Ø 10 mm, 11 mm wide, non-rotating hooks
MAX. LOAD
1 kN (O-ring hooks); band grips on request
MATERIAL
Steel, nickel-plated
COUPLING
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others via adapter
SCOPE OF DELIVERY
1 pair of grips
STANDARD
ASTM D4964 (band grips)
PART REF.
UGC-SH-280
Models & Options
Name — Description (Part #)
Elastic fabric band grips — ASTM D4964, anvils Ø 13 x 78 mm, female clevis Ø 15.9 or 20 mm (Specify at order)
O-ring hook grips — 1 kN, rollers Ø 10 x 11 mm, female clevis Ø 15.9 mm (5/8 in) (Specify at order)
Other O-ring sizes — Different roller sizes and half radii (On request)
What's Included
One pair of grips of the selected type (band grips or O-ring hooks)
Clevis coupling as specified at order
Supported Test Standards
ASTM D4964 — Tension and elongation of elastic fabrics (constant-rate-of-extension type)
Compatible Grips & Fixtures
300 lb tensile tester — Low-force tests on bands and O-rings
2.5 kN benchtop testing machine — Programmable cycling for ASTM D4964
Testing software — Cycle control and tension-at-elongation reports
Textiles testing — Other grips for fabrics and narrow goods
Elastomers testing — Grips for rubber and seal materials
“Customer quote”
Related Equipment
UGC-SH-270 Fracture Mechanics Clevis Grips
Pin-loading clevis grips for compact tension specimens in fracture toughness and fatigue crack growth tests, in several
UGC-SH-290 Chemical-Resistant Mortar Shoulder Grip
Pair of 10 kN briquette grips with tapered seats for tensile strength tests on chemical-resistant mortars, grouts and mo
UGC-SH-260 Wood Panel Surface Soundness Fixture EN 311
Anodized aluminum pull-off fixture with bonded stainless steel pads for surface soundness tests on particleboard, MDF an
UGC-SH-300 Building Sealant Tensile Fixture ISO 8339
Side-loading chuck grips for H-shaped sealant joint specimens in ISO 8339 tensile tests, with fixed 5 kN and adjustable
Elastic Fabric Band Grips and O-Ring Hooks FAQ
What is ASTM D4964 and how do these grips support it?
ASTM D4964 measures tension and elongation of elastic fabrics tested as a loop. The band grips provide the two Ø 13 x 78 mm anvils the loop runs around; our ASTM D4964 guide explains the procedure.
How are O-rings tested with the hook grips?
The O-ring is placed over two Ø 10 mm rollers on opposing hooks, which are pulled apart until the ring breaks to give tensile strength and elongation.
What load can the grips take?
The O-ring hooks are rated to 1 kN (about 225 lbf). The band grip rating is confirmed on request.
Can you supply hooks for other O-ring sizes?
Yes. Other roller sizes and half radii are available on request; send the O-ring inside diameter and cross-section.
Is each grip type supplied as a pair?
Yes, both the band grips and the O-ring hooks are supplied as one pair.
Which machine should I use?
Forces are low, so a motorized tensile tester or a 2.5 kN testing machine works. For D4964 cycling, use a machine with programmable cycles.




