top of page

Home  ›  Products  ›  Shoulder and Button Head Grips  ›  Building Sealant Tensile Fixture ISO 8339

UGC-SH-300 ISO 8339 chuck grips holding an H-shaped building sealant test piece by Universal Grip
UGC-SH-300 ISO 8339 chuck grips holding an H-shaped building sealant test piece by Universal Grip
UGC-SH-300 Building Sealant Tensile Fixture ISO 8339 by Universal Grip, view 2
UGC-SH-300 Building Sealant Tensile Fixture ISO 8339 by Universal Grip, view 3
UGC-SH-300 Building Sealant Tensile Fixture ISO 8339 by Universal Grip, view 4

Building Sealant Tensile Fixture ISO 8339

Side-loading chuck grips for H-shaped sealant joint specimens in ISO 8339 tensile tests, with fixed 5 kN and adjustable 10 kN versions.

Brand: Universal Grip  |  Model: UGC-SH-300  |  ● Configured to order

  • Holds H-shaped sealant test pieces by their substrate blocks

  • Side-loading chuck design for quick specimen change

  • Optional knurled screws lock the blocks in place

  • Adjustable universal version: 0–86 mm opening, rated to 10 kN

  • Standard pair rated to 5 kN (about 1,120 lbf), 1.3 kg per pair

  • Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm

Standards: ISO 8339  ·  ISO 8340  ·  ISO 11600  ·  EN 1279-4

Trusted by Global Companies

Chuck grips for ISO 8339 building sealant tensile tests

The UGC-SH-300 holds the H-shaped test pieces used to measure the tensile properties, adhesion and cohesion of building and glazing sealants. Sealant manufacturers, insulating glass producers and certification labs use it for ISO 8339 and the related methods that share the same specimen. See our complete ISO 8339 guide for specimen preparation, procedure and calculations.

 

How it works

The test piece is a sealant bead cast between two substrate blocks of glass, aluminum or mortar. Each block slides sideways into a chuck grip, and the grips are pulled apart so the joint is extended until it fails in adhesion or cohesion, or reaches the specified elongation. Holding the blocks rather than the sealant keeps all deformation in the bead.

 

Versions

  • Standard chuck grips: 5 kN pair, 1.3 kg, for routine runs of identical specimens.

  • Chuck grips with knurled screws: 5 kN pair, with two knurled screws that fix the substrate blocks; useful for maintained-extension tests or when blocks are slightly undersize.

  • Adjustable universal chuck grip: single grip rated to 10 kN with a 0–86 mm opening and maximum specimen size of 80 x 50 x 90 mm, for labs that test several block formats.

 

Related methods

The same grips are used for tests such as ISO 8340, ISO 9046, ISO 7389, ISO 13640, ISO 11600, EN 1279-4 and DIN 52455-3, all of which load a sealant joint between two blocks in tension. Material is nickel-plated steel, rated from 0 to 70 °C as standard; other ranges can be quoted.

 

Typical applications

Building and glazing sealants, insulating glass edge seals, construction joint products and sealant certification work. For other bonded-joint tests, see our adhesives testing page.

 

Machine fit

Sealant joints break at low force, so a 5 kN benchtop testing machine suits the standard grips and a 10 kN testing machine covers the adjustable version. Galdabini universal testing machines start at 2.5 kN, and Mark-10 F-series motorized testers up to 1,500 lbF handle many sealant joints for routine QC. Adapters connect the 5/8 in or 20 mm clevis to other crossheads.

Tell us the version, substrate block size and your machine coupling, and we will quote the grips.

Product video

At a glance

  • Max. load: 5 kN (standard); 10 kN (adjustable version)

  • Test type: Tensile properties of sealant joints

  • Specimen: H-shaped sealant test piece between substrate blocks

  • Opening: 0–86 mm, adjustable version; max. specimen 80 x 50 x 90 mm

  • Material: Steel, nickel-plated

  • Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others on request

Building Sealant Tensile Fixture ISO 8339 Specifications

MAX. LOAD

5 kN (standard); 10 kN (adjustable version)

 

TEST TYPE

Tensile properties of sealant joints

 

SPECIMEN

H-shaped sealant test piece between substrate blocks

 

OPENING

0–86 mm, adjustable version; max. specimen 80 x 50 x 90 mm

 

MATERIAL

Steel, nickel-plated

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others on request

 

TEMPERATURE RANGE

0 to 70 °C; other ranges on request

 

WEIGHT

1.3 kg per pair (standard)

 

PART REF.

UGC-SH-300

 

Models & Options

  • Name — Description (Part #)

  • Standard chuck grips — 5 kN, 1 pair (Specify at order)

  • Chuck grips with knurled screws — 5 kN, specimen fixed with 2 knurled screws, 1 pair (Specify at order)

  • Adjustable universal chuck grip — 10 kN, opening 0–86 mm, max. specimen 80 x 50 x 90 mm, 1 grip (Specify at order)

What's Included

  • Standard and knurled-screw versions: one pair of chuck grips

  • Adjustable universal version: one grip

  • Female clevis coupling Ø 15.9 mm or Ø 20 mm as ordered

Supported Test Standards

  • ISO 8339 — Sealants – determination of tensile properties (extension to break)

  • ISO 8340 — Sealants – tensile properties at maintained extension

  • ISO 11600 — Building construction – jointing products – classification and requirements for sealants

  • EN 1279-4 — Insulating glass units – physical attributes of edge seals

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-SH-290 Chemical-Resistant Mortar Shoulder Grip

UGC-SH-290 Chemical-Resistant Mortar Shoulder Grip

Pair of 10 kN briquette grips with tapered seats for tensile strength tests on chemical-resistant mortars, grouts and mo

UGC-SH-310 Spherically Seated Shoulder Grip Carrier 60 mm

UGC-SH-310 Spherically Seated Shoulder Grip Carrier 60 mm

300 kN side-loading carrier with a self-aligning spherical seat and interchangeable inserts for button-head, threaded an

UGC-SH-280 Elastic Fabric Band Grips and O-Ring Hooks

UGC-SH-280 Elastic Fabric Band Grips and O-Ring Hooks

Anvil-type band grips for looped elastic fabric tests to ASTM D4964, plus roller hooks for tensile tests on O-rings up t

UGC-SH-320 Coating Bond Strength Tensile Fixture ISO 4624

UGC-SH-320 Coating Bond Strength Tensile Fixture ISO 4624

Self-aligning pull-off fixture with interchangeable test cylinders for tensile adhesion of paints, coatings and thermal

Building Sealant Tensile Fixture ISO 8339 FAQ

What specimen does the ISO 8339 fixture hold?

An H-shaped test piece: a sealant bead cast between two substrate blocks. The grips hold the blocks so all extension takes place in the sealant.

 

Where can I find the ISO 8339 test procedure?

Our complete ISO 8339 guide covers specimen preparation, conditioning, the test procedure and calculations.

 

Which version should I choose?

The standard pair suits routine tests on one block size; the knurled-screw version fixes the blocks; the adjustable grip (0–86 mm, 10 kN) handles several block formats.

 

Can the same grips be used for other sealant standards?

Yes, they are used for tests such as ISO 8340, ISO 9046, ISO 7389, ISO 13640, ISO 11600, EN 1279-4 and DIN 52455-3.

 

What load capacity do I need?

The standard grips are rated to 5 kN and the adjustable grip to 10 kN. Most sealant joints fail well below that, so a 5 kN or 10 kN benchtop testing machine is typical.

 

Is the adjustable grip supplied as a pair?

No, the adjustable universal chuck grip is supplied as one grip. The standard and knurled-screw versions are supplied as pairs.

 

Need help configuring a shoulder and button head grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page