Home › Products › Shoulder and Button Head Grips › Coating Bond Strength Tensile Fixture ISO 4624





Coating Bond Strength Tensile Fixture ISO 4624 – 50 kN
Self-aligning pull-off fixture with interchangeable test cylinders for tensile adhesion of paints, coatings and thermal spray layers, rated to 50 kN.
Brand: Universal Grip | Model: UGC-SH-320 | ● Configured to order
One fixture for ASTM C633, ISO 4624, EN 582, ISO 14916 and related pull-off methods
Self-aligning insert holders with threaded inserts and M16 grub screws
Interchangeable test cylinders with test surfaces from Ø 10 to Ø 50 mm
Rated to 50 kN (about 11,240 lbf) for high-strength thermal spray coatings
Usable from -70 to 180 °C (-94 to 356 °F)
Centering devices and a sample preparation holder available
Trusted by Global Companies


























Pull-off fixture for coating and thermal spray bond strength
The UGC-SH-320 measures the tensile adhesion of paints, coatings and thermal spray layers on a universal testing machine. Thermal spray shops, paint and varnish labs, medical implant coaters and surface engineering groups use it when they need a laboratory pull-off value with controlled alignment and loading rate. See our complete ISO 4624 guide for specimen preparation, procedure and failure classification.
How it works
A test cylinder carrying the coating is bonded face to face with a counter cylinder. Both cylinders thread into insert holders on the upper and lower crossheads, where threaded inserts and M16 grub screws locate them. The holders are self-aligning, so the bonded joint is pulled along its axis, and the assembly is loaded until the coating, the interface or the adhesive fails.
Test cylinders by standard
Ø 25.4 mm: ASTM C633 and ASTM F1147 Fig. 3
Ø 28.7 mm: ASTM F1147 Fig. 2
Ø 25 mm: EN 582 and ISO 13779-4
Ø 40 mm: EN 582
Ø 20 mm: ASTM D4541 Type V and ISO 4624
Ø 10, 14 or 50 mm: ASTM D4541 Type V
Cylinders are made in steel or aluminum and ordered separately as pairs, so you can stock the sizes your standards call for and add more as consumables.
Typical applications
Thermal spray coatings for wear and corrosion protection, paints and varnishes, hydroxyapatite and metallic coatings on medical implants, and surface engineering R&D. For bonded joints between bulk adherends rather than coatings, see the adhesive bond tensile fixture UGC-SH-340 and our adhesives page.
Machine fit
Thermal spray bonds can exceed 10 kN, so a 50 kN benchtop testing machine matches the fixture rating; Galdabini universal testing machines run from 2.5 kN to 2,000 kN for labs that need a different frame. The holders connect with a female clevis and Ø 31.8 mm (1-1/4 in) pin, and adapters suit other couplings. With a -70 to 180 °C rating the fixture can run inside an environmental chamber.
Tell us your standards, the test surface diameters and number of cylinder pairs you need, and your machine coupling, and we will quote the set.
Product video
At a glance
Max. load: 50 kN
Test type: Pull-off tensile adhesion of coatings
Test surface: Ø 10, 14, 20, 25, 25.4, 28.7, 40 or 50 mm (by cylinder)
Cylinder material: Steel or aluminum
Coupling: Female clevis, Ø 31.8 mm (1-1/4 in) pin; others on request
Temperature range: -70 to 180 °C; other ranges on request
Coating Bond Strength Tensile Fixture ISO 4624 Specifications
MAX. LOAD
50 kN
TEST TYPE
Pull-off tensile adhesion of coatings
TEST SURFACE
Ø 10, 14, 20, 25, 25.4, 28.7, 40 or 50 mm (by cylinder)
CYLINDER MATERIAL
Steel or aluminum
COUPLING
Female clevis, Ø 31.8 mm (1-1/4 in) pin; others on request
TEMPERATURE RANGE
-70 to 180 °C; other ranges on request
SCOPE OF DELIVERY
2 insert holders incl. 2 threaded inserts and 2 M16 grub screws
TEST CYLINDERS
Ordered separately, in pairs, by standard
PART REF.
UGC-SH-320
Models & Options
Name — Description (Part #)
Cylinders Ø 25.4 mm — ASTM C633, ASTM F1147 Fig. 3 (Specify at order)
Cylinders Ø 28.7 mm — ASTM F1147 Fig. 2 (Specify at order)
Cylinders Ø 25 mm — EN 582, ISO 13779-4 (Specify at order)
Cylinders Ø 40 mm — EN 582 (Specify at order)
Cylinders Ø 20 mm — ASTM D4541 Type V, ISO 4624 (Specify at order)
Cylinders Ø 10, 14 or 50 mm — ASTM D4541 Type V (Specify at order)
Centering devices and sample preparation holder — Accessories for bonding cylinders (On request)
What's Included
2 self-aligning insert holders
2 threaded inserts
2 M16 grub screws
Test cylinders are ordered separately by standard and diameter
Supported Test Standards
Compatible Grips & Fixtures
50 kN benchtop testing machine — Matches the 50 kN fixture rating
Environmental chambers — Bond tests from -70 to 180 °C
Adhesives testing — Fixtures for bonded joints
Adhesive Bond Tensile Fixture GOST 14760 — Tensile bond strength of adhesives
Adapters — Fit the 1-1/4 in clevis to your machine
“Customer quote”
Related Equipment
UGC-SH-340 Adhesive Bond Tensile Fixture GOST 14760
Pair of bond-strength fixtures hung from universal joint adapters, so a bonded insert joint is pulled in pure tension to
UGC-SH-310 Spherically Seated Shoulder Grip Carrier 60 mm
300 kN side-loading carrier with a self-aligning spherical seat and interchangeable inserts for button-head, threaded an
UGC-SH-330 Fastener Tensile Test Fixture ISO 898-1
Upper and lower box-type holders with pin-retained, thread-size inserts for tensile tests on full-size screws, bolts and
UGC-SH-300 Building Sealant Tensile Fixture ISO 8339
Side-loading chuck grips for H-shaped sealant joint specimens in ISO 8339 tensile tests, with fixed 5 kN and adjustable
Coating Bond Strength Tensile Fixture ISO 4624 FAQ
Which standards does the UGC-SH-320 cover?
With the matching cylinders it is used for tests such as ASTM C633, ASTM D4541 Type V, ASTM F1147, ISO 4624, ISO 14916, ISO 13779-4 and EN 582.
Where can I read about the ISO 4624 procedure?
Our complete ISO 4624 guide covers dolly preparation, adhesive selection, the test procedure and how to classify the failure.
Are test cylinders included?
No. The fixture comes with two insert holders, two threaded inserts and two M16 grub screws; cylinders are ordered in pairs for each standard and diameter.
What test surface diameters are available?
Ø 10, 14, 20, 25, 25.4, 28.7, 40 and 50 mm, in steel or aluminum depending on the cylinder.
Why is the fixture rated to 50 kN?
Thermal spray coatings can bond strongly; at Ø 25.4 mm a 50 kN load is roughly 99 MPa (14,300 psi), which leaves margin above typical adhesive limits.
Can it be used in a temperature chamber?
Yes, it is rated from -70 to 180 °C (-94 to 356 °F); fit it in an environmental chamber on your testing machine.




