top of page

Home  ›  Products  ›  Wedge Grips  ›  Universal Wedge Grip 10 kN

UGC-WG-110 universal wedge grip 10 kN with 30 mm self-tightening jaws by Universal Grip
UGC-WG-110 universal wedge grip 10 kN with 30 mm self-tightening jaws by Universal Grip
UGC-WG-110 Universal Wedge Grip 10 kN by Universal Grip, view 2
UGC-WG-110 Universal Wedge Grip 10 kN by Universal Grip, view 3
UGC-WG-110 Universal Wedge Grip 10 kN by Universal Grip, view 4

Universal Wedge Grip 10 kN – 0 to 8 mm Opening

Lightweight 10 kN wedge grips with 30 mm wide self-tightening jaws for thin strip, wire and film, plus a -70 to +280 °C chamber version.

Brand: Universal Grip  |  Model: UGC-WG-110  |  ● Configured to order

  • Self-tightening wedge jaws, 30 mm (1.18 in) wide

  • Jaw opening 0–8 mm (0–0.31 in) for thin flat and small round specimens

  • Only 1.36 kg (3.0 lb) per grip without jaws

  • -70 to +280 °C (-94 to +536 °F) version for temperature chamber work

  • Blank, pyramid, V, rubber-coated and diamond-coated jaw faces

  • Optional stopper and latching function for easier loading

Standards: ASTM E8  ·  ASTM D882  ·  ISO 527-3

Trusted by Global Companies

A light 10 kN wedge grip for thin strip, wire and film

Thin specimens rarely need a heavy grip, but they do need one that holds without crushing and keeps holding as the load climbs. The UGC-WG-110 is a compact, general-purpose wedge grip rated at 10 kN (2,248 lbf) for thin flat and small round specimens. At 1.36 kg (3.0 lb) per grip, it adds little mass to the load string, which matters on smaller frames and in chambers.

 

How it works

The jaws are 30 mm (1.18 in) wide and open from 0 to 8 mm. They sit on a wedge, so as tensile load rises they are drawn tighter against the specimen. That self-tightening action lets you start with a light hold on delicate material and still reach full grip near the break. An optional stopper and a special latching function make it easier to load specimens consistently.

 

Jaw faces

All jaws share a 30 x 30 mm clamping surface and are hardened, nickel-plated steel. Choose the face to suit the specimen:

  • Blank (0–8 mm): smooth faces for soft or surface-sensitive material

  • Pyramid (0–8 mm): serrated faces for metal strip

  • V-jaws (Ø 3–8 mm): for wire and small rod

  • Rubber-coated (0–6 mm): for film and specimens that tear at sharp edges

  • Diamond-coated (0–8 mm): for hard or slippery surfaces

Other jaw surfaces are available on request. Jaws are ordered separately; the grips are supplied as a pair.

 

Temperature versions

The standard grip works from 0 to +130 °C. A high/low temperature version covers -70 to +280 °C for use with our environmental chambers.

 

Typical applications and machine fit

Thin metal strips, wires and small rods, plastic film and sheet, and chamber testing. These are specimens for tests such as ASTM E8 on strip, ASTM D882 and ISO 527-3 on film. The coupling is a female clevis for a 15.9 mm (5/8 in) or 20 mm pin. The grip suits a Galdabini 10 kN benchtop machine, and with an adapter it can also run on a Mark-10 1,500 lbF motorized tester within that tester's 6.7 kN limit. For larger cross-sections, step up to the UGC-WG-100 wedge grips at 20 or 50 kN.

Tell us the temperature range, jaw faces and coupling you need, and we will quote the grips. Request a quote.

Mechanical wedge grips

At a glance

  • Max. load: 10 kN

  • Test type: Tensile

  • Jaw opening: 0–8 mm (rubber jaws 0–6 mm; V-jaws Ø 3–8 mm)

  • Clamping surface: 30 x 30 mm

  • Coupling: Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin; others via adapter

  • Body / jaws: Steel, nickel-plated / hardened steel, nickel-plated

Universal Wedge Grip 10 kN Specifications

MAX. LOAD

10 kN

 

TEST TYPE

Tensile

 

JAW OPENING

0–8 mm (rubber jaws 0–6 mm; V-jaws Ø 3–8 mm)

 

CLAMPING SURFACE

30 x 30 mm

 

COUPLING

Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm pin; others via adapter

 

BODY / JAWS

Steel, nickel-plated / hardened steel, nickel-plated

 

TEMPERATURE RANGE

0 to +130 °C (-70 to +280 °C version)

 

WEIGHT

1.36 kg per grip without jaws

 

SCOPE OF SUPPLY

1 pair of grips without jaws

 

PART REF.

UGC-WG-110

 

Models & Options

  • Name — Description (Part #)

  • Standard — 0 to +130 °C (Specify at order)

  • High/low temperature — -70 to +280 °C (Specify at order)

  • Latching version — Special latching function (Specify at order)

  • Blank jaws 30 x 30 mm — Opening 0–8 mm (Specify at order)

  • Pyramid jaws 30 x 30 mm — Opening 0–8 mm (Specify at order)

  • V-jaws — Round specimens Ø 3–8 mm (Specify at order)

  • Rubber-coated jaws — Opening 0–6 mm (Specify at order)

  • Diamond-coated jaws — Opening 0–8 mm (Specify at order)

  • Other jaw surfaces — Special faces for your specimen (On request)

What's Included

  • One pair of 10 kN wedge grips in the temperature version ordered

  • Jaws are not included; order one or more jaw face sets

  • Clevis coupling for a 15.9 mm or 20 mm pin, as specified

Supported Test Standards

  • ASTM E8 — Tension testing of metallic materials

  • ASTM D882 — Tensile properties of thin plastic sheeting

  • ISO 527-3 — Tensile properties of plastic films and sheets

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-WG-100 Wedge Grip 20-50 kN

UGC-WG-100 Wedge Grip 20-50 kN

Self-tightening wedge grips in 20 kN and 50 kN sizes with a lever arm for fast loading and a -40 to +280 °C option for c

UGC-WG-120 Screw Action Wedge Grip 10 kN

UGC-WG-120 Screw Action Wedge Grip 10 kN

10 kN grip that combines screw pre-tension with self-tightening wedge action for elastic, hard-to-hold specimens, with o

UGC-WG-090 Wedge Grip with Crank 50 kN

UGC-WG-090 Wedge Grip with Crank 50 kN

Low-height 50 kN wedge grip with a crank lever for high preload, taking flat and round specimens up to 60 mm, such as wo

UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN

UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN

Manual wedge grips that close without moving the specimen axially, in 50, 100 and 250 kN sizes for flat and round specim

Universal Wedge Grip 10 kN FAQ

What specimen thickness fits?

The jaws open from 0 to 8 mm (0.31 in); rubber-coated jaws open to 6 mm and V-jaws take rounds of Ø 3–8 mm.

 

Which jaw face should I choose for plastic film?

Rubber-coated or blank jaws are the usual starting point for film; pyramid faces suit metal strip. Diamond-coated jaws help on hard, slippery surfaces.

 

Can it be used in a temperature chamber?

Yes. A version for -70 to +280 °C is available; the standard grip runs from 0 to +130 °C.

 

How heavy is it?

1.36 kg (3.0 lb) per grip without jaws.

 

Will it fit a Mark-10 tester?

With an adapter, yes, on a Mark-10 F-series tester; on the 1,500 lbF model the tester's capacity, not the grip's 10 kN, sets the limit.

 

Are jaws included?

No. Jaw face sets are ordered separately; the grips ship as a pair.

 

Need help configuring a wedge grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page