Screw Action Wedge Grip 10 kN | Universal Grip
top of page

Home  ›  Products  ›  Wedge Grips  ›  Screw Action Wedge Grip 10 kN

UGC-WG-120 screw action wedge grip 10 kN with symmetric jaw shaft by Universal Grip
UGC-WG-120 screw action wedge grip 10 kN with symmetric jaw shaft by Universal Grip
UGC-WG-120 Screw Action Wedge Grip 10 kN by Universal Grip, view 2
UGC-WG-120 Screw Action Wedge Grip 10 kN by Universal Grip, view 3
UGC-WG-120 Screw Action Wedge Grip 10 kN by Universal Grip, view 4

Screw Action Wedge Grip 10 kN – for Elastic Specimens

10 kN grip that combines screw pre-tension with self-tightening wedge action for elastic, hard-to-hold specimens, with offset clamping for shear.

Brand: Universal Grip  |  Model: UGC-WG-120  |  ● Configured to order

  • Screw pre-tension combined with self-tightening wedge action

  • Main shaft moves both jaws symmetrically to keep the specimen centered

  • Shaft can be disengaged for asymmetrical clamping in shear tests

  • Suited to elastic and difficult-to-hold specimens

  • Hardened pyramid and V insert jaws, 45 x 45 mm (1.77 x 1.77 in)

  • Temperature range -70 to +180 °C (-94 to +356 °F)

  • Larger 50 kN and 250 kN versions

Standards: ASTM D412  ·  ISO 37  ·  ASTM D3039

Trusted by Global Companies

Screw and wedge action in one 10 kN grip

Elastic specimens are hard to hold. As they stretch they also get thinner, so a grip that only clamps once at the start can lose its hold, while a plain wedge grip may not bite firmly enough to begin with. The UGC-WG-120 combines both principles. A screw sets a positive pre-tension on the specimen, and under load the wedge effect raises the clamping force further.

 

How it works

A main shaft moves both jaws at the same time and by the same amount, so the specimen is clamped symmetrically and stays on the load axis while you pre-tension it. Once the test starts, the jaws ride on their wedges and tighten as the tensile load increases. For shear tests, the shaft connection can be disengaged so the jaws clamp asymmetrically, offsetting the specimen as the test requires. This makes the same grip useful for tensile and shear testing.

 

Jaws

The grip is supplied with insert carriers; the insert jaws themselves are ordered separately. Both types are hardened steel, 58 HRC, nickel-plated:

  • Pyramid insert jaws: 45 x 45 mm (1.77 x 1.77 in), flat specimens 0–13 mm

  • V insert jaws: 45 mm high, round specimens Ø 5–14 mm

 

Larger versions

The same screw-and-wedge concept is built at higher capacity. A 50 kN version uses serrated jaws of 80 x 88 mm, and a 250 kN version takes serrated insert jaws of 82 x 84 mm with an opening of 0–32 mm and weighs 76.6 kg (169 lb).

 

Typical applications

Elastomers and other elastic specimens, difficult-to-grip composites, shear tests with offset clamping, and plastics and coated materials. Rubber specimens of the kind used in ASTM D412 and ISO 37 and composite strips in tests such as ASTM D3039 are typical. The working range of -70 to +180 °C allows use in an environmental chamber.

 

Machine fit

The 10 kN grip weighs 5.2 kg (11.5 lb) per grip with jaws and couples through a female clevis for a 15.9 mm (5/8 in) pin, with other couplings via adapter. It suits Galdabini 10 kN and 25 kN benchtop machines.

Tell us the capacity, jaw type, coupling and test temperature, and describe the specimen that is slipping today; we will recommend a configuration. Request a quote.

Mechanical wedge grips

At a glance

  • Max. load: 10 kN

  • Test type: Tensile, shear

  • Jaw opening: 0–13 mm flat; Ø 5–14 mm round

  • Clamping surface: 45 x 45 mm

  • Coupling: Female clevis, Ø 15.9 mm (5/8 in) pin; others via adapter

  • Body / jaws: Steel, nickel-plated / hardened steel 58 HRC, nickel-plated

Screw Action Wedge Grip 10 kN Specifications

MAX. LOAD

10 kN

 

TEST TYPE

Tensile, shear

 

JAW OPENING

0–13 mm flat; Ø 5–14 mm round

 

CLAMPING SURFACE

45 x 45 mm

 

COUPLING

Female clevis, Ø 15.9 mm (5/8 in) pin; others via adapter

 

BODY / JAWS

Steel, nickel-plated / hardened steel 58 HRC, nickel-plated

 

TEMPERATURE RANGE

-70 to +180 °C (other ranges on request)

 

WEIGHT

5.2 kg per grip incl. jaws

 

SCOPE OF SUPPLY

1 pair of grips with insert carriers, without jaws

 

PART REF.

UGC-WG-120

 

Models & Options

  • Name — Description (Part #)

  • Pyramid insert jaws — 45 x 45 mm, flat 0–13 mm (Specify at order)

  • V insert jaws — 45 mm height, round Ø 5–14 mm (Specify at order)

  • 50 kN version — Serrated jaws 80 x 88 mm (Specify at order)

  • 250 kN version — Serrated insert jaws 82 x 84 mm, opening 0–32 mm, 76.6 kg (Specify at order)

  • Other temperature ranges — Outside -70 to +180 °C (On request)

What's Included

  • One pair of screw action wedge grips

  • Insert carriers fitted to the grips

  • Insert jaws are not included; order pyramid or V insert jaw sets

Supported Test Standards

  • ASTM D412 — Tension testing of vulcanized rubber and thermoplastic elastomers

  • ISO 37 — Tensile stress-strain properties of rubber

  • ASTM D3039 — Tensile properties of polymer matrix composites

Compatible Grips & Fixtures

“Customer quote”

Related Equipment

UGC-WG-110 Universal Wedge Grip 10 kN

UGC-WG-110 Universal Wedge Grip 10 kN

Lightweight 10 kN wedge grips with 30 mm wide self-tightening jaws for thin strip, wire and film, plus a -70 to +280 °C

UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN

UGC-WG-130 Manual Non-Shift Wedge Grips 50-250 kN

Manual wedge grips that close without moving the specimen axially, in 50, 100 and 250 kN sizes for flat and round specim

UGC-WG-100 Wedge Grip 20-50 kN

UGC-WG-100 Wedge Grip 20-50 kN

Self-tightening wedge grips in 20 kN and 50 kN sizes with a lever arm for fast loading and a -40 to +280 °C option for c

UGC-WG-140 Pneumatic Wedge Grip 10-20 kN

UGC-WG-140 Pneumatic Wedge Grip 10-20 kN

Pneumatic wedge grips with the control piston outside the chamber, for -70 to +350 °C tests on short, low-friction speci

Screw Action Wedge Grip 10 kN FAQ

Why combine screw and wedge action?

The screw lets you pre-tension the specimen symmetrically before the test, and the wedge adds clamping force as the load rises. Together they hold elastic and difficult specimens that slip in a grip using only one principle.

 

Can the grip be used for shear tests?

Yes. Disengaging the shaft connection allows asymmetrical clamping, which offsets the specimen for shear tests.

 

What jaws are available?

Pyramid insert jaws (45 x 45 mm) for flat specimens 0–13 mm and V insert jaws for rounds Ø 5–14 mm, both 58 HRC.

 

What temperature range does it cover?

-70 to +180 °C (-94 to +356 °F); other ranges on request.

 

Are there higher-capacity versions?

Yes, a 50 kN version with 80 x 88 mm serrated jaws and a 250 kN version with 82 x 84 mm insert jaws and 0–32 mm opening.

 

What is supplied?

A pair of grips with insert carriers. Insert jaws are ordered separately.

 

Need help configuring a wedge grip?

Tell us your material, test standard and specimen size. We will recommend the frame, force sensor, grips and fixtures, and send a quote.

bottom of page