Home › Products › Compression Platens › Small Compression Platens with Foldable Guides





Small Compression Platens with Foldable Guides – ASTM C1424
Small nickel-plated steel platens with two foldable V-jaw guide arms that center ceramic cylinders before loading, for tests such as ASTM C1424.
Brand: Universal Grip | Model: UGC-CP-150 | ● Configured to order
Foldable guide arms center the specimen, then swing clear before loading
V-shaped guide jaws locate cylindrical specimens on the platen center
Star-knob clamping for quick, tool-free guide adjustment
Small upper and lower platens matched to ceramic specimens
Built for compressive strength tests such as ASTM C1424
Nickel-plated steel construction for wear and corrosion resistance
Max. load and coupling configured to your specimen and machine
Standards: ASTM C1424
Trusted by Global Companies


























Guided compression platens for advanced ceramic specimens
The UGC-CP-150 is a small compression platen set for ceramic research and development labs that measure the monotonic compressive strength of advanced ceramics at ambient temperature. It is built for tests such as ASTM C1424 and suits small cylindrical specimens of technical, armor and wear ceramics. Ceramics are brittle and very strong in compression, so a specimen that sits even slightly off the load axis can fail early from bending rather than in true compression. Getting the cylinder centered quickly and repeatably is the job of this fixture's guides.
How it works
Two guide arms are mounted on the lower platen, each carrying a V-shaped jaw. During setup the arms are swung in and the two V-jaws close around the cylinder from opposite sides, which places it on the center of the platen. Star knobs clamp the arms in position, so the operator can adjust them by hand without tools. Once the specimen is located, the arms are folded away and the upper platen loads the specimen with nothing touching its sides. The guides therefore never carry load or restrain the specimen during the test.
Construction
The upper and lower platens are small, matched to the size of ceramic specimens rather than general-purpose plates, which keeps the setup compact in the test space. The whole fixture is nickel-plated steel for wear and corrosion resistance, and it is specified for ambient temperature.
Typical applications
Advanced technical ceramics
Ceramic material development
Armor and wear ceramics
Research laboratories
Configuring the fixture
Maximum load and machine coupling are set at order, because both depend on your specimen size and the strength of the ceramic you test. Tell us the specimen diameter and length and the highest load you expect, and we will size the platens and choose a coupling for your frame, from a Galdabini benchtop universal testing machine to a floor-standing model. If your machine already has a coupling, adapters are available for other connections. Other platens are listed under compression platens.
Send us your specimen dimensions, maximum test load and machine coupling, and we will quote the fixture.
Small Compression Platens with Foldable Guides Specifications
TEST TYPE
Compression
SPECIMEN
Small ceramic cylinders
GUIDES
2 foldable arms with V-jaws
GUIDE CLAMPING
Star knobs, tool-free
MATERIAL
Steel, nickel-plated
TEMPERATURE RANGE
Ambient
MAX. LOAD
On request
COUPLING
On request
STANDARD
ASTM C1424
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-CP-150
Models & Options
Standard platen set — Small upper and lower platens with two foldable V-jaw guide arms (Specify at order)
Platen size — Matched to your specimen diameter and length (Specify at order)
Machine coupling — Selected for your frame and maximum test load (On request)
What's Included
Small upper and lower compression platens
Two foldable guide arms with V-shaped jaws and star-knob clamps
Coupling to your machine, specified at order
Supported Test Standards
ASTM C1424 — Monotonic compressive strength of advanced ceramics at ambient temperature
Compatible Grips & Fixtures
Benchtop Testing Machines — Galdabini frames for ceramic compression tests
Floor-Standing Testing Machines — Higher-capacity frames for strong ceramics
Adapters — Couplings for your machine connection
Compression Testing — Compression test setups and fixtures
“Customer quote”
Related Equipment
UGC-CP-010 Compression Platens with Guide Bars
Anodized aluminum compression platens on ball-bearing guide bars that stay parallel when cartons, boxes or chairs fail o
UGC-CP-100 Compression Spring Test Fixture
Guide-pin fixture that centers helical springs and stops buckling during compression tests, with pin size and coupling m
UGC-CP-170 Round Compression Platens
Matched pairs of round compression platens in eight diameters from 56 to 344 mm, in anodized aluminum or 58 HRC hardened
UGC-CP-080 Compression Platens for Bag Testing
Pair of anodized aluminum platens with slotted clamping bars that hold bags and pouches 0 to 34 mm wide for low-force co
Small Compression Platens with Foldable Guides FAQ
What are the foldable guides for?
The two arms carry V-shaped jaws that center a cylindrical ceramic specimen on the lower platen. They swing clear before loading, so they do not touch the specimen during the test.
Which standard is the fixture used for?
Compressive strength tests on advanced ceramics such as ASTM C1424.
Do the guides need tools to adjust?
No. The arms clamp with star knobs and are adjusted by hand.
What is the maximum load?
It is set at order to suit your specimen and machine. Tell us the highest load you expect when you request a quote.
What specimen shape does it take?
Small ceramic cylinders. The V-jaws are shaped to locate round specimens.
Can it test at high temperature?
No. It is specified for ambient temperature.




