Home › Products › Compression Platens › Compression Platens for Bag Testing





Compression Platens for Bag Testing – 1 kN, Adjustable Clamps
Pair of anodized aluminum platens with slotted clamping bars that hold bags and pouches 0 to 34 mm wide for low-force compression tests up to 1 kN.
Brand: Universal Grip | Model: UGC-CP-080 | ● Configured to order
Adjustable sample width from 0 to 34 mm (0 to 1.34 in) at a 15 mm sample height
Slotted clamping bars with locking screws hold the bag in place during loading
Rated to 1 kN (about 225 lbf) for low-force packaging tests
Lightweight anodized aluminum construction
Female clevis coupling with Ø 15.9 mm (5/8 in) pin
Supplied as an upper and lower platen pair
Downloads and standards
Trusted by Global Companies


























Compression platens built for bags and pouches
Flexible packaging is awkward to compress on plain platens: a filled bag or sachet slides sideways as load builds, and the result depends more on how it was placed than on the package itself. The UGC-CP-080 is a pair of anodized aluminum compression platens with adjustable clamping bars that hold the specimen in position while it is loaded. It is designed for packaging QC labs and film converters who run low-force compression tests on bags, pouches and sachets.
How the clamps work
Each platen carries a slotted clamping bar. Loosen the locking screws, slide the bar to set the sample width anywhere from 0 to 34 mm (0 to 1.34 in), and lock it again. The clamps are laid out for a sample height of 15 mm (0.59 in). With the specimen held at the same position on every test, the platens close on it squarely and the force reading reflects the package, not how far it shifted.
Construction and fit
Anodized aluminum keeps the platens light, which helps when they hang from a small load cell, and resists wear and corrosion.
Rated to 1 kN (about 225 lbf), the range where flexible packaging tests usually sit.
Female clevis coupling with a 15.9 mm (5/8 in) pin on both platens; other couplings through our adapters.
Supplied as a matched upper and lower pair.
Typical applications
Compression checks on flexible packaging bags, pouches and sachets, film packaging quality control, and other low-force compression tests where the specimen must not wander. For larger cartons and boxes, the guided UGC-CP-010 compression platens with guide bars are a better match.
Which tester to use
At 1 kN the platens sit comfortably on a Galdabini 2.5 kN benchtop universal testing machine. They also suit Mark-10 F-series motorized testers from the 300 lb model upward (300 lbF is about 1.33 kN), with an adapter to match the tester's mounting. Keep the test load within the platens' 1 kN rating on either type of frame.
Send us your bag dimensions and machine coupling, if it is anything other than a Ø 15.9 mm female clevis, and we'll quote the bag testing platens.
Compression Platens for Bag Testing Specifications
MAX. LOAD
1 kN
TEST TYPE
Compression
SAMPLE WIDTH
0-34 mm, adjustable
SAMPLE HEIGHT
15 mm
CLAMPING
Slotted clamping bars with locking screws
MATERIAL
Aluminum, anodized
COUPLING
Female clevis, Ø 15.9 mm (5/8 in) pin
TEMPERATURE RANGE
On request
SCOPE OF SUPPLY
Upper and lower platen pair
DRAWINGS
Dimensional drawings and 3D models on request
PART REF.
UGC-CP-080
Models & Options
Bag testing platen pair — Upper and lower platens, 0-34 mm sample width, 15.9 mm female clevis (Specify at order)
Other machine coupling — Adapter for testers without a 5/8 in clevis (On request)
Other bag sizes — Tell us your bag dimensions (On request)
What's Included
Upper and lower anodized aluminum compression platens
Adjustable slotted clamping bars with locking screws on each platen
Female clevis couplings, Ø 15.9 mm (5/8 in) pin
Supported Test Standards
Standards list
Compatible Grips & Fixtures
2.5 kN Benchtop Testing Machine — Galdabini frame sized for 1 kN bag tests
300 lb Motorized Tester — Mark-10 F-series tester; 300 lbF covers the 1 kN rating
UGC-CP-010 Compression Platens with Guide Bars — Guided platens for cartons and boxes
Compression Testing — Low-force compression setups
Adapters — Couplings for other tester mounts
“Customer quote”
Related Equipment
UGC-CP-010 Compression Platens with Guide Bars
Anodized aluminum compression platens on ball-bearing guide bars that stay parallel when cartons, boxes or chairs fail o
UGC-CP-030 Heated Compression Platen 280 C
Electrically heated Ø 150 mm compression platen with its own controller, for compression tests up to 280 °C and 20 kN wi
UGC-CP-100 Compression Spring Test Fixture
Guide-pin fixture that centers helical springs and stops buckling during compression tests, with pin size and coupling m
UGC-CP-020 Rectangular Steel Compression Platen 100 x 200 mm
Nickel-plated steel compression platen with a 100 x 200 mm loading face, rated to 50 kN, for elongated specimens and sam
Compression Platens for Bag Testing FAQ
What sample sizes do the platens take?
The clamps adjust for a sample width of 0 to 34 mm at a sample height of 15 mm.
What is the maximum load?
1 kN, about 225 lbf.
How is the bag held during the test?
A slotted clamping bar on each platen is set to the sample width and fixed with locking screws, so the bag cannot slide out of position.
Is it supplied as a pair?
Yes. You receive an upper and a lower platen, both with a female clevis coupling and Ø 15.9 mm (5/8 in) pin.
Can I use it on a Mark-10 tester?
Yes, on F-series models from 300 lbF upward, with an adapter to match the tester's mounting.
What material are the platens?
Anodized aluminum, which keeps them light for low-force load cells.




