Home › Products › Compression Platens › Compression Spring Test Fixture





Compression Spring Test Fixture – Pin-Guided, Made to Order
Guide-pin fixture that centers helical springs and stops buckling during compression tests, with pin size and coupling made to suit your spring.
Brand: Universal Grip | Model: UGC-CP-100 | ● Configured to order
Guide pin centers the spring and prevents buckling under load
Pin diameter 2 to 43 mm and length 20 to 410 mm, made to suit the spring
Insert carrier version takes interchangeable pins of different diameters
Guide tube version gives outer guidance for larger springs
Steel body, with nickel-coated and stainless steel versions
Female clevis couplings Ø 15.9 mm, 20 mm or 31.8 mm; others via adapter
Downloads and standards
Trusted by Global Companies


























Pin-guided fixture for compression spring testing
A helical compression spring that is long compared with its diameter will bow sideways under load. Once it buckles, the force reading no longer reflects the spring rate you are trying to measure. The UGC-CP-100 prevents that with a guide pin that runs through the center of the spring, keeping it straight and centered on the load axis from free length down to the test height. It is used by spring makers, automotive and valve suppliers, and incoming inspection teams who check spring force and rate.
Made to your spring
Each fixture is built around three dimensions you specify:
A, pin diameter: 2 to 43 mm (0.08 to 1.69 in), made to fit inside the spring's inner diameter
B, pin length: 20 to 410 mm (0.79 to 16.1 in), to suit the spring's free length
C, coupling: female clevis Ø 15.9 mm (5/8 in), Ø 20 mm or Ø 31.8 mm (1-1/4 in), with other connections via adapters
If you are unsure of the right pin, send us the spring's inner and outer diameter and its free length and we will size it. Maximum load depends on the coupling size; built examples range from 100 N (about 22 lbf) up to 30 kN (about 6,744 lbf).
Versions
The standard design is a single guide pin. Two variants cover cases a fixed pin does not:
Insert carrier version that accepts interchangeable pins of different diameters, useful when one fixture has to serve a family of spring sizes.
Guide tube version that guides larger springs from the outside rather than through the center.
Fixtures are made in steel, with nickel-coated and stainless steel versions available. The standard temperature range is 0 to +70 °C (32 to 158 °F); other ranges on request.
Typical applications
Force and rate measurement on helical compression springs, automotive and valve springs, and incoming inspection of purchased springs.
Choosing a tester
Light springs are well served by Mark-10 F-series motorized force testers from 100 to 1,500 lbF, with an adapter for the fixture coupling. Stiffer springs up to the 30 kN class belong on a Galdabini benchtop universal testing machine. The fixture is supplied as one unit; pair it with a lower compression platen if your machine does not already have one.
Give us pin diameter, pin length, coupling and maximum spring force, or simply your spring drawing, and request a quote.
Product video
At a glance
Max. load: Depends on coupling size (examples: 100 N to 30 kN)
Test type: Compression (springs)
Pin diameter (A): 2 to 43 mm (made to order)
Pin length (B): 20 to 410 mm (made to order)
Coupling (C): Female clevis Ø 15.9 mm (5/8 in), Ø 20 mm or Ø 31.8 mm (1-1/4 in); others via adapter
Material: Steel; nickel-coated or stainless steel versions
Compression Spring Test Fixture Specifications
MAX. LOAD
Depends on coupling size (examples: 100 N to 30 kN)
TEST TYPE
Compression (springs)
PIN DIAMETER (A)
2 to 43 mm (made to order)
PIN LENGTH (B)
20 to 410 mm (made to order)
COUPLING (C)
Female clevis Ø 15.9 mm (5/8 in), Ø 20 mm or Ø 31.8 mm (1-1/4 in); others via adapter
MATERIAL
Steel; nickel-coated or stainless steel versions
TEMPERATURE RANGE
0 to +70 °C (others on request)
SCOPE OF SUPPLY
1 fixture
DRAWINGS
Dimensional drawings on the data sheet; certified drawings and 3D models on request
PART REF.
UGC-CP-100
Models & Options
Pin Ø 2 x 20 mm — Example build with female clevis Ø 15.9 mm (Specify at order)
Pin Ø 3 x 50 mm — Example build, max. 100 N, nickel-coated steel (Specify at order)
Pin Ø 6 x 60 mm — Example build with female clevis Ø 15.9 mm (Specify at order)
Pin Ø 12 x 290 mm — Example build with female clevis Ø 31.8 mm (Specify at order)
Pin Ø 24 x 100 mm — Example build, max. 30 kN (Specify at order)
Pin Ø 38 x 210 mm — Example build, max. 3.2 kN, nickel-coated steel (Specify at order)
Insert carrier version — Accepts interchangeable pins of different diameters (On request)
Guide tube version — Outer tube guidance for larger springs (On request)
What's Included
One spring test fixture with guide pin to your specified diameter (A) and length (B)
Female clevis coupling in your specified size (C)
Opposing compression platen not included; order one if your machine needs it
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Motorized Force Testers — Mark-10 F-series, 100-1,500 lbF, for light springs
Benchtop Universal Testing Machines — Galdabini frames for stiffer springs up to 30 kN
Compression Platens — Lower platen for the spring to bear on
Compression Testing — Compression test setups and guidance
Adapters — Couplings for other machine connections
“Customer quote”
Related Equipment
UGC-CP-080 Compression Platens for Bag Testing
Pair of anodized aluminum platens with slotted clamping bars that hold bags and pouches 0 to 34 mm wide for low-force co
UGC-CP-150 Small Compression Platens with Foldable Guides
Small nickel-plated steel platens with two foldable V-jaw guide arms that center ceramic cylinders before loading, for t
UGC-CP-030 Heated Compression Platen 280 C
Electrically heated Ø 150 mm compression platen with its own controller, for compression tests up to 280 °C and 20 kN wi
UGC-CP-170 Round Compression Platens
Matched pairs of round compression platens in eight diameters from 56 to 344 mm, in anodized aluminum or 58 HRC hardened
Compression Spring Test Fixture FAQ
Why does a spring need a guide pin?
Long springs buckle sideways under compression. The pin keeps the spring straight and centered so the force reading reflects the spring rate.
What pin sizes can you make?
Pin diameters from 2 to 43 mm and lengths from 20 to 410 mm, made to order for your spring.
What load can the fixture take?
It depends on the coupling size. Built examples range from 100 N to 30 kN.
I don't know which pin I need. What should I send?
The spring's inner and outer diameter and its free length. We will size the pin and coupling from that.
Can one fixture test several spring sizes?
Yes, with the insert carrier version, which accepts interchangeable pins of different diameters.
What temperature range is it rated for?
0 to +70 °C as standard; other ranges on request.




