Home › Products › Compression Platens › Compression Test Probes





Compression Test Probes – Radius, Ball and Flat Tips
Hardened steel compression probes with radius, ball or flat tips for indentation, puncture and local compression tests.
Brand: Universal Grip | Model: UGC-CP-250 | ● Configured to order
Tip types: radius, V-shaped radius, fixed or interchangeable ball, flat round or rectangular
Radius tips R0.5 to R120 mm, ball tips Ø 2.5–10 mm, flat tips Ø 2.5–50 mm
Hardened steel, 58 HRC, nickel-plated for a durable tip
Usable from -70 to +350 °C
Standard female clevis couplings Ø 15.9 mm (5/8 in) or Ø 20 mm
Each probe supplied with its locking pin
Custom lengths, tips and couplings made to order
Downloads and standards
Trusted by Global Companies


























Compression test probes for indentation and puncture
UGC-CP-250 compression test probes turn a universal testing machine or motorized force tester into an indentation, puncture or local compression setup. Each probe is a hardened steel pin with a defined tip and a clevis adapter for the load cell. They are used by packaging, foam and elastomer, flooring and medical-device labs that need a repeatable contact geometry pressed into a specimen at a controlled speed.
Tip geometries
Radius tips – a milled radius from R0.5 to R120 mm, for puncture and indentation on films, packaging and closures.
V-shaped radius – a radius milled into a V profile, for line-type contact.
Ball tips – Ø 2.5 to 10 mm, either fixed or as an interchangeable ball for quick tip changes.
Flat tips – round or rectangular faces from Ø 2.5 to 50 mm, for local compression and residual indentation.
Three probes cover the most common requests and share the same layout, a 40 mm pin with 80 mm total length: a R2.5 mm radius tip, a R5 mm radius tip and a Ø 10 mm ball tip. Other tip sizes and probe lengths are made to order.
Construction
Probes are made from steel hardened to 58 HRC and nickel-plated, so the tip keeps its shape through repeated tests on hard or abrasive samples. They are usable from -70 to +350 °C, which covers testing inside a temperature chamber as well as at room temperature. Each probe is supplied with its locking pin and mounts on a female clevis with a Ø 15.9 mm (5/8 in) or Ø 20 mm pin; other couplings are on request.
Machine fit and setup
Maximum load depends on the coupling and the probe size, and is confirmed for your tip at quote. Most puncture and indentation tests run at modest forces, which makes the probes a natural match for Mark-10 F-series motorized testers (100–1,500 lbF) with an adapter, as well as Galdabini benchtop universal testing machines. For the specimen side, a flat lower platen from our round compression platens (UGC-CP-170) or one of our puncture fixtures gives a stable support. Read more about puncture testing setups.
Typical applications
Puncture resistance of packaging
Indentation of foams and elastomers
Floor coverings and panels
Medical closures and components
Tell us the tip type and size, probe length, coupling and maximum test load, and we'll make and quote the probe.
Product video
At a glance
Max. load: Depends on coupling and probe size
Test type: Compression, indentation, puncture
Tip types: Radius, V-shaped radius, ball, flat round, flat rectangular
Probe length: Made to order (e.g. 40 mm pin, 80 mm total)
Material: Steel, hardened 58 HRC, nickel-plated
Temperature range: -70 to +350 °C
Compression Test Probes Specifications
MAX. LOAD
Depends on coupling and probe size
TEST TYPE
Compression, indentation, puncture
TIP TYPES
Radius, V-shaped radius, ball, flat round, flat rectangular
PROBE LENGTH
Made to order (e.g. 40 mm pin, 80 mm total)
MATERIAL
Steel, hardened 58 HRC, nickel-plated
TEMPERATURE RANGE
-70 to +350 °C
COUPLING
Female clevis Ø 15.9 mm (5/8 in) or Ø 20 mm; others on request
SCOPE OF SUPPLY
1 probe incl. locking pin
PART REF.
UGC-CP-250
Models & Options
Radius tip R2.5 mm — 40 mm pin, 80 mm total length (Specify at order)
Radius tip R5 mm — 40 mm pin, 80 mm total length (Specify at order)
Ball tip Ø 10 mm — 40 mm pin, 80 mm total length (Specify at order)
Radius tips R0.5–120 mm — Made to order (On request)
V-shaped radius tips — Made to order (On request)
Ball tips Ø 2.5–10 mm — Fixed or interchangeable ball (On request)
Flat tips Ø 2.5–50 mm — Round or rectangular faces (On request)
What's Included
1 compression test probe with the specified tip and coupling
Locking pin
Lower platen or specimen support ordered separately
Certified dimensional drawings and 3D models available on request
Supported Test Standards
Standards list
Compatible Grips & Fixtures
Puncture Fixtures — Specimen supports and holders for puncture tests
UGC-CP-170 Round Compression Platens — Flat lower platen to support the specimen
Motorized Tensile Testers — Mark-10 F-series testers for low-force indentation and puncture
Adapters — Clevis adapters to suit your load cell
Puncture Testing — How puncture tests are set up
“Customer quote”
Related Equipment
UGC-CP-170 Round Compression Platens
Matched pairs of round compression platens in eight diameters from 56 to 344 mm, in anodized aluminum or 58 HRC hardened
UGC-CP-240 Spherically Seated Compression Platen Wide Angle
Wide-angle spherically seated compression platens that swivel ±15° to ±20° to follow inclined or uneven specimen faces.
UGC-CP-230 Spherically Seated Compression Platens
Lockable spherically seated compression platens in hardened steel or anodized aluminum that align to non-parallel specim
UGC-CP-190 T-Groove Compression Platens
T-slotted platens in anodized aluminum or nickel-plated steel that give you a flat base for mounting grips, fixtures and
Compression Test Probes FAQ
Which tip should I choose?
Radius tips suit puncture and indentation of films and closures, ball tips give a spherical contact, and flat tips are used for local compression and residual indentation. Tell us the test and we'll recommend a geometry.
Can the ball be changed?
Yes. Ball-tip probes are available with a fixed ball or with an interchangeable ball for quick tip changes, in sizes from Ø 2.5 to 10 mm.
What is the maximum load?
It depends on the coupling and the probe size, and is confirmed for your tip at quote.
Will the probes fit my tester?
Standard couplings are a female clevis with a Ø 15.9 mm (5/8 in) or Ø 20 mm pin. Other machines, including Mark-10 testers, are connected with our adapters.
Can I use them in a temperature chamber?
Yes. The hardened, nickel-plated steel probes are usable from -70 to +350 °C.
Do you make custom probes?
Yes. Tip type and size, probe length and coupling are made to order; just specify them with your request.




