Home › Products › Hydraulic Grips › Single-Piston Hydraulic Geotextile Grip 250 kN





Single-Piston Hydraulic Geotextile Grip 250 kN – Insert Jaws
Compact single-piston hydraulic grip for wide-width geotextile and geogrid tests, with 500 kN clamping at 450 bar and quick-change 220 x 150 mm insert jaws.
Brand: Universal Grip | Model: UGC-HG-040 | ● Configured to order
250 kN (about 56,200 lbf) max. tensile load; 500 kN clamping at 450 bar
Single hydraulic piston keeps the grip compact
Quick-change insert jaws with a 220 x 150 mm (8.7 x 5.9 in) clamping surface
Wave, pyramid and Vulkollan-coated faces on common carriers
Jaw opening 0–30 mm (0–1.18 in) for thick and flexible specimens
Nickel-coated steel body; female clevis for a Ø 60 mm pin
Can be driven by an air-hydraulic pump
Standards: ASTM D6637 · ISO 10319 · ASTM D4595
Trusted by Global Companies


























Single-piston hydraulic grip for wide-width geosynthetic tests
The UGC-HG-040 is built for geosynthetics labs running wide-width tensile tests on geotextiles and geogrids, such as ASTM D6637. A single hydraulic piston develops up to 500 kN (about 112,400 lbf) of clamping force at 450 bar (6,525 psi), enough to hold strong woven geotextiles and polymer geogrids through to the grip's 250 kN (about 56,200 lbf) maximum tensile load. Using one piston rather than an opposed pair keeps the body compact and leaves the front of the grip clear for loading wide specimens.
Quick-change insert jaws
Clamping is done by insert jaws mounted on carriers, each with a 220 x 150 mm (8.7 x 5.9 in) clamping surface. Changing material means swapping inserts, not grips:
Wave inserts for woven and nonwoven geotextiles
Pyramid inserts for stiffer products, including conveyor belts
Vulkollan-coated inserts for surfaces that serrations would damage
The 0–30 mm (0–1.18 in) jaw opening takes thick nonwovens and belt sections as well as thin woven fabrics.
Drive, coupling and safety
The grip can be powered by an air-hydraulic pump, so shop compressed air generates the clamping pressure. The standard connection is a female clevis for a Ø 60 mm (2.36 in) pin. An adapter plate version replaces it with a platen carrying an M12 x 1.75 threaded hole for mounting adapters. Wide specimens store a lot of energy before they break, and a safety guard with guide is recommended for this grip.
Typical applications
Woven and nonwoven geotextiles
Polymer geogrids
Conveyor belts
Technical fabrics
Alongside geogrid testing, the jaw width suits wide-width geotextile specimens for methods such as ISO 10319 and ASTM D4595.
Choosing between our geotextile grips
The UGC-HG-050 carries the same 250 kN rating but uses wider one-piece jaws, 300 or 330 mm across, and reaches 650 kN of clamping at 450 bar. Pick the HG-040 when you want interchangeable insert faces, including Vulkollan, in a compact body; pick the HG-050 when specimen width calls for a jaw over 300 mm. At 250 kN either grip pairs with Galdabini floor-standing universal testing machines, and adapters cover other couplings.
Tell us the jaw faces you need, your machine coupling and whether you want the air-hydraulic pump or adapter plate, and we will quote the set: request a quote.
Single-Piston Hydraulic Geotextile Grip 250 kN Specifications
MAX. TENSILE LOAD
250 kN
CLAMPING FORCE
500 kN at 450 bar
JAW FACE SIZE
220 x 150 mm (W x H) insert jaws
JAW FACES
Wave, pyramid, Vulkollan-coated
JAW OPENING
0–30 mm
COUPLING
Female clevis, Ø 60 mm pin
BODY MATERIAL
Steel, nickel-coated
OPERATION
Hydraulic, single piston; air-hydraulic pump available
TEMPERATURE RANGE
On request
PART REF.
UGC-HG-040
Models & Options
Wave insert jaws — 220 x 150 mm, for geotextiles (Specify at order)
Pyramid insert jaws — 220 x 150 mm, also for conveyor belts (Specify at order)
Vulkollan insert jaws — 220 x 150 mm, for sensitive surfaces (Specify at order)
Jaw carriers — Hold the quick-change inserts in the grip (Specify at order)
Adapter plate version — Platen with M12 x 1.75 threaded hole for adapters (Specify at order)
Air-hydraulic pump — Generates clamping pressure from compressed air (Specify at order)
Safety guard with guide — Recommended for wide-width specimens (On request)
What's Included
Single-piston hydraulic grip, female clevis for Ø 60 mm pin
Insert jaws and carriers in the faces chosen at order
Air-hydraulic pump and adapter plate version are options
Safety guard with guide recommended; ordered separately
Supported Test Standards
ASTM D6637 — Tensile properties of geogrids, single or multi-rib method
ISO 10319 — Wide-width tensile test for geosynthetics
ASTM D4595 — Wide-width strip tensile method for geotextiles
Compatible Grips & Fixtures
Floor-Standing UTMs — Galdabini frames suited to 250 kN geosynthetic tests
UGC-HG-050 Hydraulic Geotextile Grip 250 kN — Wider one-piece jaws, up to 650 kN clamping
Textiles — Fabric and geotextile test setups
Adapters — Couplings for non-clevis frames
Hydraulic UTMs — Hydraulic frames for high-strength geosynthetics
“Customer quote”
Related Equipment
UGC-HG-050 Hydraulic Geotextile Grip 250 kN
Wide-jaw hydraulic grip for geotextiles and geogrids: 250 kN tensile rating, 500 kN clamping at 350 bar or 650 kN at 450
UGC-HG-030 Large Hydraulic Grip for Wood 2000 kN
Four-cylinder hydraulic grip with segmented serrated jaws for tension tests on full-size structural timber, glulam and L
UGC-HG-020 Hydraulic Grip 170 kN Clamping
Single-cylinder hydraulic grip: an 80 mm piston drives one jaw against an adjustable counter jaw for 170 kN of clamping
UGC-HG-060 Hydraulic Grip 60-180 kN Clamping
Spring-return hydraulic grips built on Ø 50 mm pistons: 60 kN clamping at 315 bar with one piston, 180 kN with three, in
Single-Piston Hydraulic Geotextile Grip 250 kN FAQ
Which insert jaw should I use for nonwoven geotextiles?
Wave inserts are the usual choice for woven and nonwoven geotextiles. Use Vulkollan-coated inserts if the surface is easily damaged.
Can the UGC-HG-040 test conveyor belts?
Yes. Fit the pyramid insert jaws, which give the bite needed on belt sections.
What drives the grip?
It is hydraulic and can be powered by an air-hydraulic pump. Full 500 kN clamping is reached at 450 bar.
How thick a specimen will it take?
Jaw opening is 0–30 mm (0–1.18 in).
How does it differ from the UGC-HG-050?
The HG-040 uses a single piston and 220 mm quick-change inserts. The UGC-HG-050 has wider fixed jaws, 300 or 330 mm, and up to 650 kN clamping.
Which test methods is it used for?
Wide-width tests such as ASTM D6637 on geogrids and ISO 10319 on geosynthetics.




