Home › Products › Hydraulic Grips › Hydraulic Geotextile Grip 250 kN





Hydraulic Geotextile Grip 250 kN – Wide Pyramid or Wave Jaws
Wide-jaw hydraulic grip for geotextiles and geogrids: 250 kN tensile rating, 500 kN clamping at 350 bar or 650 kN at 450 bar, jaws up to 330 mm wide.
Brand: Universal Grip | Model: UGC-HG-050 | ● Configured to order
Rated for 250 kN (about 56,200 lbf) maximum tensile load
500 kN clamping at 350 bar; 650 kN (about 146,100 lbf) at 450 bar
Pyramid jaws 300 x 110 mm or wave jaws 330 x 112 mm (W x H)
Holds the full width of geosynthetic specimens without slippage
Wave jaw version opens 0–35 mm (0–1.38 in)
Hardened jaws in a nickel-plated steel body, rated 0 to +70 °C
Standards: ASTM D6637 · ASTM D4595 · ISO 10319
Trusted by Global Companies


























Wide-jaw hydraulic grip for geotextiles and geogrids
A wide-width geosynthetic result is only as good as the grip line across the specimen: if the edges hold while the middle slips, or the reverse, the strength figure means little. The UGC-HG-050 clamps the whole width evenly with one-piece jaws up to 330 mm (13.0 in) across. It is rated for 250 kN (about 56,200 lbf) tensile load and develops 500 kN (about 112,400 lbf) of clamping at 350 bar (5,075 psi), rising to 650 kN at 450 bar (6,525 psi) when a product needs a firmer hold. Labs running geogrid tests such as ASTM D6637 are the main users.
Two jaw versions
Pyramid jaw version: 300 x 110 mm (11.8 x 4.3 in) serrated jaws with a female clevis coupling for a Ø 60 mm pin. The serrations bite into geogrid ribs and stiff woven products.
Wave jaw version: 330 x 112 mm (13.0 x 4.4 in) wave jaws with a 0–35 mm (0–1.38 in) opening and a male clevis coupling with a Ø 70 mm pin hole. The wave profile holds nonwovens and coated products without cutting them.
Both versions use hardened jaws in a nickel-plated steel body for corrosion resistance, and the grip is rated for 0 to +70 °C (32 to 158 °F).
Setting the clamping pressure
Because clamping force follows supply pressure, the same grip covers a range of products. Running at 350 bar gives 500 kN, which handles most geotextiles; raising the supply to 450 bar adds another 150 kN for high-tenacity woven geotextiles and reinforced geomembranes that try to pull out. Tell us the pressure your hydraulic supply delivers when you order so the grip and supply are matched.
Typical applications
Woven and nonwoven geotextiles
Polymer geogrids
Reinforced geomembranes
Woven technical fabrics
Besides geogrid work, the jaw width suits wide-strip specimens for ASTM D4595 and ISO 10319.
Machine fit and the single-piston alternative
The 250 kN rating suits Galdabini floor-standing universal testing machines. Note that the two versions use different couplings, so check your crosshead connection; adapters are available. If you would rather change faces by swapping inserts, the UGC-HG-040 single-piston geotextile grip uses 220 x 150 mm quick-change wave, pyramid and Vulkollan jaws at the same 250 kN tensile rating.
Let us know the jaw face and width you need, your machine coupling and your hydraulic supply pressure, and we will configure the grips: request a quote.
Product video
At a glance
Max. load: 250 kN
Clamping force: 500 kN at 350 bar; 650 kN at 450 bar
Jaw face size: 300 x 110 mm pyramid or 330 x 112 mm wave (W x H)
Jaw opening: 0–35 mm (wave jaws)
Coupling: Female clevis Ø 60 mm pin or male clevis Ø 70 mm pin hole, by version
Body material: Steel, nickel-plated
Hydraulic Geotextile Grip 250 kN Specifications
MAX. LOAD
250 kN
CLAMPING FORCE
500 kN at 350 bar; 650 kN at 450 bar
JAW FACE SIZE
300 x 110 mm pyramid or 330 x 112 mm wave (W x H)
JAW OPENING
0–35 mm (wave jaws)
COUPLING
Female clevis Ø 60 mm pin or male clevis Ø 70 mm pin hole, by version
BODY MATERIAL
Steel, nickel-plated
JAWS
Hardened
TEMPERATURE RANGE
0 to +70 °C
OPERATION
Hydraulic
PART REF.
UGC-HG-050
Models & Options
Pyramid jaw version — 300 x 110 mm serrated jaws, female clevis coupling (Ø 60 mm pin) (Specify at order)
Wave jaw version — 330 x 112 mm wave jaws, 0–35 mm opening, male clevis coupling (Ø 70 mm pin hole) (Specify at order)
Jaw face and width — Confirmed against your specimen width (Specify at order)
Coupling adapters — For frames with a different connection (On request)
What's Included
Hydraulic geotextile grip in the version ordered
Hardened pyramid or wave jaws, matching the version
Coupling per version: female clevis Ø 60 mm pin or male clevis Ø 70 mm pin hole
Hydraulic supply: specify the pressure available (350 or 450 bar)
Supported Test Standards
ASTM D6637 — Geogrid tensile properties by single- or multi-rib specimens
ASTM D4595 — Geotextile tensile properties, wide-width strip
ISO 10319 — Geosynthetics wide-width tensile test
Compatible Grips & Fixtures
Floor-Standing UTMs — Galdabini frames with room for wide geogrid specimens
UGC-HG-040 Single-Piston Geotextile Grip — Quick-change 220 x 150 mm insert jaws
Textiles — Geotextile and fabric test setups
Adapters — Bridges between clevis sizes
Tensile Testing — Planning wide-width tension tests
“Customer quote”
Related Equipment
UGC-HG-040 Single-Piston Hydraulic Geotextile Grip 250 kN
Compact single-piston hydraulic grip for wide-width geotextile and geogrid tests, with 500 kN clamping at 450 bar and qu
UGC-HG-060 Hydraulic Grip 60-180 kN Clamping
Spring-return hydraulic grips built on Ø 50 mm pistons: 60 kN clamping at 315 bar with one piston, 180 kN with three, in
UGC-HG-030 Large Hydraulic Grip for Wood 2000 kN
Four-cylinder hydraulic grip with segmented serrated jaws for tension tests on full-size structural timber, glulam and L
UGC-HG-070 Hydraulic Wedge Grips 400-600 kN
Heavy-duty hydraulic wedge grips rated 400 kN or 600 kN for tension, compression and dynamic tests on flat and round met
Hydraulic Geotextile Grip 250 kN FAQ
What clamping force does the UGC-HG-050 give?
500 kN at 350 bar (5,075 psi), or 650 kN at 450 bar (6,525 psi). Maximum tensile load is 250 kN.
Should I choose pyramid or wave jaws?
Pyramid jaws (300 x 110 mm) suit geogrids and stiff woven products. Wave jaws (330 x 112 mm) hold nonwovens and coated products without cutting them.
What is the jaw opening?
The wave jaw version opens 0–35 mm (0–1.38 in).
Do both versions use the same coupling?
No. The pyramid version has a female clevis for a Ø 60 mm pin; the wave version has a male clevis with a Ø 70 mm pin hole. Adapters are available.
Which tests is it used for?
Wide-width tests such as ASTM D6637 on geogrids and ASTM D4595 on geotextiles.
What temperature range is it rated for?
0 to +70 °C (32 to 158 °F).




