Home › Products › Hydraulic Grips › Hydraulic Wedge Grips 400-600 kN





Hydraulic Wedge Grips 400-600 kN – Tension and Compression
Heavy-duty hydraulic wedge grips rated 400 kN or 600 kN for tension, compression and dynamic tests on flat and round metal specimens up to 60 mm.
Brand: Universal Grip | Model: UGC-HG-070 | ● Configured to order
400 kN (about 89,900 lbf) or 600 kN (about 134,900 lbf) in tension and compression
Wedge jaws self-tighten as tensile load rises
Pyramid wedge jaws for flat specimens 0–60 mm (0–2.36 in) thick
V wedge jaws for round specimens 5–60 mm diameter
Closing pressure max. 250 bar (3,625 psi); enclosed jaw area with door
Flange mount: 16 x M30 on a Ø 200 mm (7.87 in) bolt circle
Air-hydraulic pump with clamping force set by potentiometer or 0–10 V
Standards: ASTM A615 · ASTM A370 · ISO 6892-1
Trusted by Global Companies


























Hydraulic wedge grips for 400–600 kN metals testing
The UGC-HG-070 pair is for labs pulling reinforcing bar, steel rod, heavy plate and tube sections at loads where manual wedge grips become slow and tiring to set. Rated at 400 kN (about 89,900 lbf) or 600 kN (about 134,900 lbf), the grips work in tension and compression and are built for dynamic and cyclic tests as well as static pulls.
How the wedge action works
Hydraulic pressure, at most 250 bar (3,625 psi), drives the wedge jaws along a tapered body. Once the specimen carries load, the wedge geometry pulls the jaws tighter, so clamping force rises with tensile load and ends up well above the rated tensile capacity: up to 860–1000 kN for the 400 kN grip and 1200–1500 kN for the 600 kN grip. The jaws sit in an enclosed area behind a door, which stays closed during the test.
Two operating rules follow from the wedge design. Closing a wedge grip puts axial load on the specimen, so the machine should drive back to zero load while the second grip closes. And a grip must never be opened while the specimen is under tension.
Jaws
Pyramid wedge jaws, 1.2 x 45° tooth, for flat specimens in five ranges: 0–15, 5–20, 15–30, 30–45 and 45–60 mm
V wedge jaws for rounds in four ranges: 5–15, 15–30, 30–45 and 45–60 mm diameter
Curved jaws for sections cut from tube up to 200 mm (7.87 in) diameter, with walls up to 20 mm
Flat specimens can be up to 80 x 60 mm in cross-section.
Pump and installation
The optional air-hydraulic pump gives remote open, stop and close, with clamping force set by potentiometer or by an external 0–10 V signal. The grips mount by flange, 16 x M30 bolts on a Ø 200 mm bolt circle, with other couplings on request. The 400 kN grip measures Ø 296 mm x 300 mm high (11.7 x 11.8 in); a pair weighs about 100 kg (220 lb) at 400 kN or 120 kg (265 lb) at 600 kN. Rated operating range is 0 to +40 °C (32 to 104 °F).
Machine fit
These grips belong on Galdabini hydraulic universal testing machines and floor-standing frames in the 400–600 kN class, including setups for cyclic loading. Rebar programs typically follow ASTM A615 and ASTM A370. If clamping preload is a problem for short or brittle specimens, the UGC-HG-090 non-shift wedge grip keeps its jaws fixed vertically while closing.
Tell us the capacity, your machine flange or coupling, the jaw ranges you need and whether to include the pump, and we will prepare the quote: request a quote.
Hydraulic universal testing machines overview
At a glance
Max. load: 400 kN or 600 kN, tension and compression
Clamping force: Up to 860–1000 kN (400 kN) or 1200–1500 kN (600 kN)
Specimen size: Flat up to 80 x 60 mm, 0–60 mm thick; round up to 60 mm Ø
Jaw surface: Pyramid 1.2 x 45° and V wedge jaws
Closing pressure: Max. 250 bar
Coupling: Flange, 16 x M30 on Ø 200 mm bolt circle; others on request
Hydraulic Wedge Grips 400-600 kN Specifications
MAX. LOAD
400 kN or 600 kN, tension and compression
CLAMPING FORCE
Up to 860–1000 kN (400 kN) or 1200–1500 kN (600 kN)
SPECIMEN SIZE
Flat up to 80 x 60 mm, 0–60 mm thick; round up to 60 mm Ø
JAW SURFACE
Pyramid 1.2 x 45° and V wedge jaws
CLOSING PRESSURE
Max. 250 bar
COUPLING
Flange, 16 x M30 on Ø 200 mm bolt circle; others on request
TEMPERATURE RANGE
0 to +40 °C
WEIGHT
Approx. 100 kg (400 kN) or 120 kg (600 kN) per pair
DIMENSIONS (400 KN)
Ø 296 mm x 300 mm height
PART REF.
UGC-HG-070
Models & Options
400 kN grips — Hydraulic wedge grip, one pair (Specify at order)
600 kN grips — Hydraulic wedge grip, one pair (Specify at order)
Pyramid wedge jaws — Flat 0–15, 5–20, 15–30, 30–45 or 45–60 mm (Specify at order)
V wedge jaws — Round 5–15, 15–30, 30–45 or 45–60 mm Ø (Specify at order)
Curved jaws — Tube sections, max. 20 mm wall, 200 mm tube Ø (On request)
Air-hydraulic pump — Remote open/stop/close; force set by potentiometer or 0–10 V (Specify at order)
What's Included
Hydraulic wedge grips, one pair, 400 kN or 600 kN
Wedge jaw sets ordered separately by specimen range
Air-hydraulic pump with remote control ordered separately
Flange coupling 16 x M30 on Ø 200 mm unless another coupling is specified
Supported Test Standards
ASTM A615 — Deformed and plain carbon-steel bars for concrete reinforcement
ASTM A370 — Test methods for mechanical testing of steel products
ISO 6892-1 — Metallic materials tensile test, ambient temperature
Compatible Grips & Fixtures
Hydraulic UTMs — Galdabini frames in the 400–600 kN class
Floor-Standing UTMs — Large frames for rebar and heavy plate
UGC-HG-090 Non-Shift Wedge Grip — No axial preload while clamping
Fatigue Grips — Other grips for cyclic loading
Metals Testing — Rebar, rod and plate test setups
“Customer quote”
Related Equipment
UGC-HG-090 Hydraulic Non-Shift Wedge Grip 100 kN
Hydraulic wedge grip whose jaws hold their vertical position while the body closes them, so short and sensitive specimen
UGC-HG-060 Hydraulic Grip 60-180 kN Clamping
Spring-return hydraulic grips built on Ø 50 mm pistons: 60 kN clamping at 315 bar with one piston, 180 kN with three, in
UGC-HG-080 Hydraulic Single-Action Grip 300 kN
Symmetric hydraulic grip with spring return: 600 kN clamping at 700 bar, a 300 kN tensile rating and a 0–60 mm opening f
UGC-HG-050 Hydraulic Geotextile Grip 250 kN
Wide-jaw hydraulic grip for geotextiles and geogrids: 250 kN tensile rating, 500 kN clamping at 350 bar or 650 kN at 450
Hydraulic Wedge Grips 400-600 kN FAQ
How much clamping force do the UGC-HG-070 grips develop?
Clamping force rises with load through the wedge action: up to 860–1000 kN for the 400 kN grip and 1200–1500 kN for the 600 kN grip.
Can the grips be used in compression?
Yes. Both capacities are rated for tension and compression, and they suit dynamic and cyclic tests.
Why should the machine return to zero load while the second grip closes?
Closing a wedge grip draws the jaws along the taper, which puts axial load on the specimen. Driving the frame to zero load avoids preloading it.
Can I test sections of pipe or tube?
Yes, with curved jaws for tube up to 200 mm diameter and walls up to 20 mm.
Can my test software set the clamping force?
The air-hydraulic pump accepts an external 0–10 V signal, or force can be set by potentiometer.
What temperature range applies?
0 to +40 °C (32 to 104 °F).




